Changes

Jump to: navigation, search
Undo revision 5303 by [[Special:Contributions/Michael|Michael]] ([[User talk:Michael|talk]])
The lookup of the default settings for the stoney maintenance service is as follows:
# '''Service roles:''' <code>ou=defaults,ou=stoney_office,ou=roles,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
# '''OpenStack project:''' <code>ou=defaults,uid=4100000,ou=projects,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
# '''Customer:''' <code>ou=defaults,uid=4000001,ou=customers,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
# '''Reseller:''' <code>ou=defaults,uid=4000000,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
For example: If now default no maintenance values or only a subset of default maintenance values can be found are set by the provisioning api (or provisioning script), an missing values are first looked up in the 'OpenStack project''service roles''' sub tree. If there are still missing values, another the next lookup must be executed occurs in the 'Customer''OpenStack project''' subtree. Once again, if there are still missing values, the next lookup occurs in the '''customer''' sub tree. If we there are still have missing default values, repeat the final lookup occurs in the 'Reseller''reseller''' sub tree. If we there are still have missing values, these the provisioning api (or provisioning script) must be filled out by inform the usercalling instance (this would normally be a human).
<source lang="ldif">
dn: ou=defaults,uid=4000000,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: sstMaintenanceObjectClassorganizationalUnitobjectclass: sstMaintenanceDefaultsObjectClassobjectclass: sstNotificationObjectClass
objectclass: sstRelationship
ou: defaults
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| description
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstIsActive
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUSTMAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Is the entry active? Either <code>TRUE</code> (yes) or <code>FALSE</code> (no).
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstServicePriority
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstServiceAutomated
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronRepeatType
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| How often is a cron job to be repeated. Valid values are: <code>daily</code>, <code>weekly</code>, <code>monthly</code>, <code>yearly</code>.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronInterval
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The interval of a cron job. This attribute is dependant on the attribute sstCronRepeatType. Valid values are: <code>1</code> - <code>12</code>. For example: <code>2</code> could be every two days, weeks, months or years (depending on the value of the attribute <code>sstCronRepeatType</code>.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronOccurrenceInMonth
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronDayOfWeek
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronMinute
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronMinuteEnd
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronHour
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronHourEnd
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronDuration
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The duration of the maintenance window in minutes. Valid values are: <code>15</code> - <code>1440</code> (15 minutes to 24 hours). For example: <code>60</code>, which means 60 minutes (one hour).
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstNotificationWarning
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstNotificationObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUSTMAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| This multi-valued attribute will be used to turn single notifications on or off. Currently, the only allowed value is <code>reminder</code>. The value (name) corresponds with the template dn.
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the UID of the person to be informed if necessary. This UID can be used to look up the persons mail address, preferred language, name, surname or other information.
 
As this attribute is multi-valued, the lookups will continue, even if this attribute is set.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the UID of the person who is responsible for the system or service. This UID can be used to look up the persons mail address, preferred language, name, surname or other information.
The lookup of the default settings for the stoney maintenance service is as follows:
# '''Service roles:''' <code>ou=defaults,ou=stoney_office,ou=roles,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
# '''OpenStack project:''' <code>ou=defaults,uid=4100000,ou=projects,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
# '''Customer:''' <code>ou=defaults,uid=4000001,ou=customers,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
# '''Reseller:''' <code>ou=defaults,uid=4000000,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
For example: If now default no maintenance values or only a subset of default maintenance values can be found are set by the provisioning api (or provisioning script), an missing values are first looked up in the 'OpenStack project''service roles''' sub tree. If there are still missing values, another the next lookup must be executed occurs in the 'Customer''OpenStack project''' subtree. Once again, if there are still missing values, the next lookup occurs in the '''customer''' sub tree. If we there are still have missing default values, repeat the final lookup occurs in the 'Reseller''reseller''' sub tree. If we there are still have missing values, these the provisioning api (or provisioning script) must be filled out by inform the usercalling instance (this would normally be a human).
<source lang="ldif">
dn: ou=defaults,uid=4000001,ou=customers,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: sstMaintenanceObjectClassorganizationalUnitobjectclass: sstMaintenanceDefaultsObjectClassobjectclass: sstNotificationObjectClass
objectclass: sstRelationship
ou: defaults
sstResponsiblePersonUID: 1000482 # MAY: Support stepping stone AG (support@stepping-stone.ch)
sstResponsibleDeputyPersonUID: 1000482 # MAY: Support stepping stone AG (support@stepping-stone.ch)
sstBelongsToResellerUID: 4000000
sstBelongsToCustomerUID: 4000001
</source>
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| description
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstIsActive
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUSTMAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Is the entry active? Either <code>TRUE</code> (yes) or <code>FALSE</code> (no).
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstServicePriority
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstServiceAutomated
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronRepeatType
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| How often is a cron job to be repeated. Valid values are: <code>daily</code>, <code>weekly</code>, <code>monthly</code>, <code>yearly</code>.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronInterval
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The interval of a cron job. This attribute is dependant on the attribute sstCronRepeatType. Valid values are: <code>1</code> - <code>12</code>. For example: <code>2</code> could be every two days, weeks, months or years (depending on the value of the attribute <code>sstCronRepeatType</code>.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronStartDatesstCronOccurrenceInMonth| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The first time occurence of the day in a month a cron job is to be executed. This date is stored in the form of [YYYY][MM][DD] ([httpValid values are:<code>1</code> - <code>4</en.wikipedia.org/wiki/ISO_8601 ISO 8601])code>. For example: <code>20103143</code> (would be the 14th of March 2015third occurence. If you use a value higher than 4, the calculation will fail in months, which only have 4 same days (for example February will never have 5 Mondays ...).
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronDurationsstCronDayOfWeek| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The duration Day of the maintenance window in minutes. Valid values are: week (<code>150</code> - <code>14406</code> (15 minutes to 24 hours), where Sunday is <code>0</code>. For example: <code>601</code>, which means 60 minutes (one hour)Monday.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronMinute
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronMinuteEnd
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronHour
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronHourEnd
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronDayOfWeeksstCronDuration| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Day The duration of week (the maintenance window in minutes. Valid values are: <code>015</code> - <code>61440</code>(15 minutes to 24 hours), where Sunday is <code>0</code>. For example: <code>160</code>, which means Monday60 minutes (one hour).
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronDayOfMonthsstNotificationWarning| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstNotificationObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The day of This multi-valued attribute will be used to turn single notifications on or off. Currently, the month a cron job only allowed value is to be executed. Valid values are: <code>1</code> - <code>31reminder</code>. For example: <code>3</code> is the third of The value (name) corresponds with the monthtemplate dn.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronMonthOfyearsstInformPersonUID| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The month Stores the UID of the year a cron job is person to be executedinformed if necessary. Valid values are: <code>1</code> - <code>12</code>. For example: <code>3</code> would This UID can be Marchused to look up the persons mail address, preferred language, name, surname or other information. As this attribute is multi-valued, the lookups will continue, even if this attribute is set.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronOccurrenceInMonthsstResponsiblePersonUID| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The occurence Stores the UID of the day in a month a cron job person who is to be executedresponsible for the system or service. Valid values are: <code>1</code> - <code>4</code>. For example: <code>3</code> would This UID can be used to look up the third occurence. If you use a value higher than 4persons mail address, the calculation will fail in monthspreferred language, which only have 4 same days (for example February will never have 5 Mondays ...)name, surname or other information.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstInformPersonUIDsstResponsibleDeputyPersonUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the UID of the deputy of the person to be informed if necessarywho is responsible for the system or service. This UID can be used to look up the persons mail address, preferred language, name, surname or other information.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstResponsiblePersonUIDsstBelongsToResellerUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the reseller UID of the person who is responsible for the system leaf belongs to. A unique integer value with 7 digits or servicemore. This UID can be used to look up In the persons mail addresscase of OpenStack Domains (resellers), preferred language, name, surname or other informationthe value of <code>sstBelongsToResellerUID</code> corresponds with the value of <code>uid</code>. For example: <code>sstBelongsToResellerUID: 4000000</code> corresponds with <code>uid: 4000000</code>.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstResponsibleDeputyPersonUIDsstBelongsToCustomerUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the customer UID of the deputy of leaf belongs to. A unique value with 7 digits or more, must correspond with the person who uid entry. Each reseller is responsible for also a customer in the system or serviceLDAP directory. This UID can Therefore, the value of the attribute <code>sstBelongsToCustomerUID</code> should always be used set to look up the persons mail address, preferred languagecustomer UID, name, surname or other informationthat reflects the reseller for the OpenStack Domains.
|-| style="border-topFor example:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstNotificationWarning| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <centercode>MUST</center>| style="border-topsstBelongsToCustomerUID:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| This multi-valued attribute will be used to turn single notifications on or off. Currently, the only allowed value is <code>reminder4000001</code>. The value (name) corresponds with the template dn.
|}
description: The sub tree for the specific maintenance service settings for the OpenStack project 'Customer Ltd. - Public Systems' with the uid 4100001.
sstIsActive: TRUE
sstBelongsToDomainID: b01822477be64c09950022486300c59c
sstBelongsToResellerUID: 4000000
sstBelongsToCustomerUID: 4000001
The default value is <code>TRUE</code>.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBelongsToDomainID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstOpenStackProject
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The OpenStack domain id the project belongs to.
 
For example: <code>sstBelongsToDomainID: b01822477be64c09950022486300c59c</code>.
 
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBelongsToResellerUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the reseller UID the leaf belongs to. A unique integer value with 7 digits or more. In the case of OpenStack Domains (resellers), the value of <code>sstBelongsToResellerUID</code> corresponds with the value of <code>uid</code>.
 
For example: <code>sstBelongsToResellerUID: 4000000</code> corresponds with <code>uid: 4000000</code>.
 
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBelongsToCustomerUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the customer UID the leaf belongs to. A unique value with 7 digits or more, must correspond with the uid entry. Each reseller is also a customer in the LDAP directory. Therefore, the value of the attribute <code>sstBelongsToCustomerUID</code> should always be set to the customer UID, that reflects the reseller for the OpenStack Domains.
 
For example: <code>sstBelongsToCustomerUID: 4000001</code>.
|}
The lookup of the default settings for the stoney maintenance service is as follows:
# '''Service roles:''' <code>ou=defaults,ou=stoney_office,ou=roles,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
# '''OpenStack project:''' <code>ou=defaults,uid=4100000,ou=projects,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
# '''Customer:''' <code>ou=defaults,uid=4000001,ou=projects,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
# '''Reseller:''' <code>ou=defaults,uid=4000000,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
For example: If now default no maintenance values or only a subset of default maintenance values can be found are set by the provisioning api (or provisioning script), an missing values are first looked up in the 'OpenStack project''service roles''' sub tree. If there are still missing values, another the next lookup must be executed occurs in the 'Customer''OpenStack project''' subtree. Once again, if there are still missing values, the next lookup occurs in the '''customer''' sub tree. If we there are still have missing default values, repeat the final lookup occurs in the 'Reseller''reseller''' sub tree. If we there are still have missing values, these the provisioning api (or provisioning script) must be filled out by inform the usercalling instance (this would normally be a human).
<source lang="ldif">
dn: ou=defaults,uid=4000001,ou=projects,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: sstMaintenanceObjectClassorganizationalUnitobjectclass: sstMaintenanceDefaultsObjectClassobjectclass: sstNotificationObjectClass
objectclass: sstRelationship
ou: defaults
description: This sub tree stores the default settings for the stoney maintenance service for the OpenStack project 'Customer Ltd. - Internal Systems' with OpenStack id '5a3a4fd5d6e94a87815131be42d8e6d9' and with the OpenStack project uid '4000001'.
sstIsActive: TRUE # MUSTMAY: The default is always TRUE, otherwise why bother?
sstServicePriority: 3 # MAY: We always set this, in case sstServiceAutomated is set to FALSE (as a fall-back position)
sstServiceAutomated: TRUE # MAY: Depending on the reseller, we either have TRUE or FALSE. If sstServiceAutomated is not set, we presume FALSE
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| description
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstIsActive
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUSTMAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Is the entry active? Either <code>TRUE</code> (yes) or <code>FALSE</code> (no).
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstServicePriority
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstServiceAutomated
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronRepeatType
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| How often is a cron job to be repeated. Valid values are: <code>daily</code>, <code>weekly</code>, <code>monthly</code>, <code>yearly</code>.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronInterval
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The interval of a cron job. This attribute is dependant on the attribute sstCronRepeatType. Valid values are: <code>1</code> - <code>12</code>. For example: <code>2</code> could be every two days, weeks, months or years (depending on the value of the attribute <code>sstCronRepeatType</code>. |-| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronOccurrenceInMonth| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The occurence of the day in a month a cron job is to be executed. Valid values are: <code>1</code> - <code>4</code>. For example: <code>3</code> would be the third occurence. If you use a value higher than 4, the calculation will fail in months, which only have 4 same days (for example February will never have 5 Mondays ...). |-| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronDayOfWeek| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Day of week (<code>0</code> - <code>6</code>), where Sunday is <code>0</code>. For example: <code>1</code>, which means Monday. |-| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronMinute| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The number of minutes past the hour that the maintenance window must start. Valid values are: <code>0</code> - <code>59</code>. For example: <code>30</code>, which means 30 minutes past the hour. If the attribute <code>sstCronMinuteEnd</code> is set, then <code>sstCronMinute</code> is interpreted as the start of a maintenance window minute range. |-| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronMinuteEnd| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The number of minutes past the hour that the maintenance window must end (minus the duration defined with attribute <code>sstCronDuration>/code>). Valid values are: <code>0</code> - <code>59</code>. For example: <code>45</code>, which means 45 minutes past the hour. If this attribute is set, it is interpreted as the end of a maintenance window minute range, while <code>sstCronMinute</code> is interpreted as the start of a maintenance window minute range. |-| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronHour| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The hour the maintenance window must start. Valid values are: <code>0</code> - <code>23</code>. For example: <code>9</code>, which means 9 am, while <code>17</code> means 5 pm. If the attribute <code>sstCronHourEnd</code> is set, then <code>sstCronMinute</code> is interpreted as the start of a maintenance window hour range. |-| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronHourEnd| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The hour the maintenance window must end. Valid values are: <code>0</code> - <code>23</code>. For example: <code>9</code>, which means 9 am, while <code>17</code> means 5 pm. If this attribute is set, it is interpreted as the end of a maintenance window hour range, while <code>sstCronHour</code> is interpreted as the start of a maintenance window hour range. Therefore, the latest maintenance window can start at <coode>sstCronHourEnd</code> minus the duration defined with attribute <code>sstCronDuration</code>. |-| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronDuration| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The duration of the maintenance window in minutes. Valid values are: <code>15</code> - <code>1440</code> (15 minutes to 24 hours). For example: <code>60</code>, which means 60 minutes (one hour). |-| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstNotificationWarning| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstNotificationObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| This multi-valued attribute will be used to turn single notifications on or off. Currently, the only allowed value is <code>reminder</code>. The value (name) corresponds with the template dn. |-| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstInformPersonUID| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the UID of the person to be informed if necessary. This UID can be used to look up the persons mail address, preferred language, name, surname or other information. As this attribute is multi-valued, the lookups will continue, even if this attribute is set. |-| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstResponsiblePersonUID| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the UID of the person who is responsible for the system or service. This UID can be used to look up the persons mail address, preferred language, name, surname or other information. |-| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstResponsibleDeputyPersonUID| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the UID of the deputy of the person who is responsible for the system or service. This UID can be used to look up the persons mail address, preferred language, name, surname or other information. |-| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBelongsToResellerUID| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the reseller UID the leaf belongs to. A unique integer value with 7 digits or more. In the case of OpenStack Domains (resellers), the value of <code>sstBelongsToResellerUID</code> corresponds with the value of <code>uid</code>.
 
For example: <code>sstBelongsToResellerUID: 4000000</code> corresponds with <code>uid: 4000000</code>.
 
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBelongsToCustomerUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the customer UID the leaf belongs to. A unique value with 7 digits or more, must correspond with the uid entry. Each reseller is also a customer in the LDAP directory. Therefore, the value of the attribute <code>sstBelongsToCustomerUID</code> should always be set to the customer UID, that reflects the reseller for the OpenStack Domains.
 
For example: <code>sstBelongsToCustomerUID: 4000001</code>.
 
|}
 
Legend:
* '''x''': Mandatory in all cases.
 
=== Maintenance - Configuration - Service (Puppet) roles ===
The sub tree for the service (Puppet) roles specific maintenance service settings:
<source lang="ldif">
dn: ou=roles,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
ou: roles
description: The sub tree for the service (Puppet) roles specific maintenance service settings.
</source>
 
The sub tree of the specific maintenance service settings for the stoney office service (Puppet) role called 'stoney_office' (Puppet roles don't contain spaces).
<source lang="ldif">
dn: ou=stoney_office,ou=roles,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
objectclass: sstServiceConfigurationObjectClass
ou: stoney_office
description: The sub tree of the specific maintenance service settings for the stoney office service (Puppet) role called 'stoney_office'.
sstIsActive: TRUE
sstIsDefault: TRUE
</source>
 
 
The following table describes the different attributes:
{| style="border-spacing:0;"
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| '''Attribute'''
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| '''Objectclass'''
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Existence'''</center>
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Mandatory'''</center>
| style="border:0.002cm solid #000000;padding:0.097cm;"| '''Description'''
 
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| ou
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| organizationalUnit
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The name of the service (Puppet) role.
 
For example: <code>ou: stoney_office</code> (Puppet roles don't contain spaces).
 
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| description
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| organizationalUnit
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The description of the leaf.
 
For example: <code>The sub tree of the specific maintenance service settings for the stoney office service (Puppet) role called 'stoney_office'.</code>
 
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstIsActive
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstServiceConfigurationObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Is the entry active? Either <code>TRUE</code> (yes) or <code>FALSE</code> (no).
 
The default value is <code>TRUE</code>.
 
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstIsDefault
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstServiceConfigurationObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Contains the leaf a default entry? Either <code>TRUE</code> (yes) or <code>FALSE</code> (no).
 
If <code>sstIsDefault</code> is set to <code>TRUE</code>, the information of this subtree must alway be used (to make sure, that all automated maintenance windows are executed in the same time frame).
 
|}
 
Legend:
* '''x''': Mandatory in all cases.
 
==== Maintenance - Configuration - service (Puppet) roles - Defaults ====
This sub tree stores the default settings for the stoney maintenance service settings for the stoney office service (Puppet) role called 'stoney_office'.
 
The configuration below tells us the following:
* We have a maintenance window range (as <code>sstCronMinuteEnd</code> and <code>sstCronHourEnd</code> are set).
* The maintenance window is executed every 2nd Wednesday of every month.
* The maintenance windows can start a 03:00 and must end at 05:00 and takes half an hour (30 minutes).
* A reminder will be sent to 'Support stepping stone AG <support@stepping-stone.ch>'.
 
The lookup of the default settings for the stoney maintenance service is as follows:
# '''Service roles:''' <code>ou=defaults,ou=stoney_office,ou=roles,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
# '''OpenStack project:''' <code>ou=defaults,uid=4100000,ou=roles,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
# '''Customer:''' <code>ou=defaults,uid=4000001,ou=roles,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
# '''Reseller:''' <code>ou=defaults,uid=4000000,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
 
For example: If no maintenance values or only a subset of maintenance values are set by the provisioning api (or provisioning script), an missing values are first looked up in the '''service roles''' sub tree. If there are still missing values, the next lookup occurs in the '''OpenStack project''' subtree. Once again, if there are still missing values, the next lookup occurs in the '''customer''' sub tree. If there are still missing values, the final lookup occurs in the '''reseller''' sub tree. If there are still missing values, the provisioning api (or provisioning script) must inform the calling instance (this would normally be a human).
 
<source lang="ldif">
dn: ou=defaults,ou=stoney_office,ou=roles,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
objectclass: sstMaintenanceDefaultsObjectClass
objectclass: sstNotificationObjectClass
objectclass: sstRelationship
ou: defaults
description: This sub tree stores the default settings for the stoney maintenance service settings for the stoney office service (Puppet) role called 'stoney_office'. Please be aware, that this is the production definition. The integration (test) definition is the same, except that the sstCronOccurrenceInMonth attribute is 1 instead of 2 (a week before).
sstIsActive: TRUE # MAY: The default is always TRUE, otherwise why bother?
sstServicePriority: 3 # MAY: We always set this, in case sstServiceAutomated is set to FALSE (as a fall-back position)
sstServiceAutomated: TRUE # MAY: Depending on the reseller, we either have TRUE or FALSE. If sstServiceAutomated is not set, we presume FALSE
sstCronRepeatType: monthly # MAY: repeat type is monthly
sstCronInterval: 1 # MAY: repeat every month
sstCronOccurrenceInMonth: 2 # MAY: second occurence
sstCronDayOfWeek: 3 # MAY: Wednesday
sstCronMinute: 0 # MAY: 0 Minutes past the hour
sstCronMinuteEnd: 0 # MAY: 0 Minutes past the hour (new attribute, for if we have a range: 03:00 - 05:00)
sstCronHour: 3 # MAY: 3 am
sstCronHourEnd: 5 # MAY: 5 am (new attribute, for if we have a range: 03:00 - 05:00)
sstCronDuration: 30 # MAY: 30 minutes (half an hour)
sstNotificationWarning: reminder # MAY: We alway set this (Multi-valued attribute).
sstInformPersonUID: 1000482 # MAY: Support stepping stone AG (support@stepping-stone.ch)
sstResponsiblePersonUID: 1000482 # MAY: Support stepping stone AG (support@stepping-stone.ch)
sstResponsibleDeputyPersonUID: 1000482 # MAY: Support stepping stone AG (support@stepping-stone.ch)
</source>
 
The following table describes the different attributes:
{| style="border-spacing:0;"
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| '''Attribute'''
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| '''Objectclass'''
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Existence'''</center>
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Mandatory'''</center>
| style="border:0.002cm solid #000000;padding:0.097cm;"| '''Description'''
 
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| description
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The description of the leaf.
 
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstIsActive
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Is the entry active? Either <code>TRUE</code> (yes) or <code>FALSE</code> (no).
 
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstServicePriority
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The maintenance service level. The possible maintenance service levels (1, 2 or 3):
* <code>3</code>: Maintenance P3 [per Unit]: The Security Advisories will be installed once a month at the desired moment during the working hours (Monday to Friday from 09:00 - 12:00 and 13:00 - 17:00).
* <code>2</code>: Maintenance P2 [per Unit]: The Security Advisories will be installed once a month at the desired moment during the extended working hours (Monday to Friday from 07:00 - 12:00 and 13:00 - 19:00).
* <code>1</code>: Maintenance P1 [per Unit]: The Security Advisories will be installed once a month at the desired moment around the clock (Monday to Sunday from 00:00 - 24:00).
For more information on these maintenance service levels, visit stepping stone GmbH [http://www.stepping-stone.ch/infrastructure-as-a-service/maintenance/ web page].
 
If the attribute <code>sstServiceAutomated</code> is set to <code>TRUE</code>, the <code>sstServicePriority</code> will be ignored. And we will have automated maintenance windows in the form of:
* Maintenance Automated (vcs_gitlab) [per Unit]: The Security Advisories will be installed once a month at the desired moment around the clock (Monday to Sunday from 00:00 - 24:00).
 
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstServiceAutomated
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| A maintenance window is either executed automatically:
* <code>sstServiceAutomated: TRUE</code>
or manually:
* <code>sstServiceAutomated: FALSE</code>
If the attribute <code>sstServiceAutomated</code> does not exist, presume <code>FALSE</code>.
 
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronRepeatType
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| How often is a cron job to be repeated. Valid values are: <code>daily</code>, <code>weekly</code>, <code>monthly</code>, <code>yearly</code>.
 
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronInterval
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The interval of a cron job. This attribute is dependant on the attribute sstCronRepeatType. Valid values are: <code>1</code> - <code>12</code>. For example: <code>2</code> could be every two days, weeks, months or years (depending on the value of the attribute <code>sstCronRepeatType</code>.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronOccurrenceInMonth
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronDayOfWeek
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronMinute
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronMinuteEnd
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronHour
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronHourEnd
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronDuration
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The duration of the maintenance window in minutes. Valid values are: <code>15</code> - <code>1440</code> (15 minutes to 24 hours). For example: <code>60</code>, which means 60 minutes (one hour).
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstNotificationWarning
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClasssstNotificationObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUSTMAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| This multi-valued attribute will be used to turn single notifications on or off. Currently, the only allowed value is <code>reminder</code>. The value (name) corresponds with the template dn.
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the UID of the person to be informed if necessary. This UID can be used to look up the persons mail address, preferred language, name, surname or other information.
 
As this attribute is multi-valued, the lookups will continue, even if this attribute is set.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the UID of the deputy of the person who is responsible for the system or service. This UID can be used to look up the persons mail address, preferred language, name, surname or other information.
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the reseller UID the leaf belongs to. A unique integer value with 7 digits or more. In the case of OpenStack Domains (resellers), the value of <code>sstBelongsToResellerUID</code> corresponds with the value of <code>uid</code>.
For example: <code>sstBelongsToResellerUID: 4000000</code> corresponds with <code>uid: 4000000</code>.
 
For the service (Puppet) roles this attribute must not be set, as the content of this value must be taken from either the OpenStack project, the customer or the reseller.
|-
For example: <code>sstBelongsToCustomerUID: 4000001</code>.
 
For the service (Puppet) roles this attribute must not be set, as the content of this value must be taken from either the OpenStack project, the customer or the reseller.
|}
description: The maintenance leaf for the virtual machine with the uid 1234567.
sstIsActive: TRUE
sstBillable: TRUE
sstServicePriority: 3
sstServiceAutomated: TRUE
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Is the entry active? Either <code>TRUE</code> (yes) or <code>FALSE</code> (no).
 
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBillable
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| It the entry billable? Either <code>TRUE</code> (yes) or <code>FALSE</code> (no). All hierarchical levels must have <code>sstBillable: TRUE</code> to actually have an invoice generated and sent. If the attribute <code>sstBillable</code> doesn't exist, the default is <code>TRUE</code>. This way, we are forced to set a reseller, customer or product manually to <code>sstBillable: FALSE</code> if we want to avoid sending them an invoice.
|-
Michael
SLB, editor, reviewer
3,368
edits
Retrieved from "http://wiki.stoney-cloud.org/wiki/Special:MobileDiff/5182...5304"