View source for stoney maintenance: OpenLDAP directory data organisation

= Abstract =
This document describes the OpenLDAP directory data organisation for the stoney '''maintenance service'''.

= Data Organisation =
The following chapters explain the data organisation of the stoney cloud OpenLDAP directory, in this case we looking at the '''maintenance service'''.

= Maintenance =
The following LDIF shows the '''maintenance''' entry of the whole OpenLDAP directory tree for the stoney cloud:
<source lang="ldif">
dn: ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
ou: maintenance
description: The sub tree for the maintenance (configuration management) service.
</source>

== Maintenance Configuration ==
The sub tree for the configuration of the maintenance service:
<source lang="ldif">
dn: ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
ou: configuration
description: The sub tree for the configuration of the maintenance service.
</source>

=== Maintenance Configuration Reseller ===
The sub tree for the reseller specific maintenance service settings:
<source lang="ldif">
dn: ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
ou: reseller
description: The sub tree for the reseller specific maintenance service settings.
</source>

The sub tree for the specific maintenance service settings for the reseller Reseller Ltd. with the uid 4000000.
<source lang="ldif">
dn: uid=4000000,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: sstReseller
objectclass: sstServiceConfigurationObjectClass
uid: 4000000
o: Reseller Ltd.
description: The sub tree for the specific maintenance service settings for the reseller Reseller Ltd. with the uid 4000000.
sstIsActive: TRUE
sstIsDefault: TRUE
sstBelongsToResellerUID: 4000000
</source>

The following table describes the different attributes:
{| style="border-spacing:0;"
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| '''Attribute'''
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Existence'''</center>
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Mandatory'''</center>
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Self-Service'''</center>
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Changeable'''</center>
| style="border:0.002cm solid #000000;padding:0.097cm;"| '''Description'''

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| uid
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| A unique integer value with 7 digits or more. For example: <code>4000000</code>. 

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| o
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The company name, for example: <code>Reseller Ltd.</code>.

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| description
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The description of the leaf. 

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstIsActive
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Is the entry active? Either <code>TRUE</code> (yes) or <code>FALSE</code> (no).

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstIsDefault
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Contains the leaf a default entry? Either <code>TRUE</code> (yes) or <code>FALSE</code> (no). If <code>sstIsDefault</code> is set to <code>TRUE</code>, this entry acts as a fall back configuration. In other words: If a reseller doesn't have his own maintenance service configuration, then this on will be used.

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBelongsToResellerUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the reseller UID the leaf belongs to. A unique value with 7 digits or more. For example: <code>4000000</code>.

|}

Legend:
* '''x''': Mandatory in all cases.

==== Maintenance Configuration Reseller Notification Settings ====
The sub tree stores the notification information for the maintenance service for the reseller Reseller Ltd. with the uid 4000000. This information is used as a fallback. The lookup is as follows:
# '''Unit:''' <code>uid=4000003,ou=units,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
# '''Customer:''' <code>ou=notifications,uid=4000001,ou=customers,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
# '''Reseller:''' <code>ou=notifications,uid=4000000,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
# '''Default Reseller:''' <code>ou=notifications,uid=4000000,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
The idea is, that even if somebody forgot to define something, no maintenance window will be lost or forgotten.

<source lang="ldif">
dn: ou=notifications,uid=4000000,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
objectclass: sstNotificationObjectClass
ou: notifications
description: The sub tree stores the notification information for the maintenance service for the reseller Reseller Ltd. with the uid 4000000.
sstInformPersonUID: 4000002
sstResponsiblePersonUID: 4000002
sstNotificationWarning: maintenance
</source>

The following table describes the different attributes:
{| style="border-spacing:0;"
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| '''Attribute'''
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Existence'''</center>
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Mandatory'''</center>
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Self-Service'''</center>
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Changeable'''</center>
| style="border:0.002cm solid #000000;padding:0.097cm;"| '''Description'''

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| ou
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The name of this leaf.

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| description
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The description of the leaf.

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstInformPersonUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the persons UID the notification will be sent to. For example: <code>4000002</code>. This means the information of the person is stored under the dn: <code>uid=4000002,ou=people,dc=stoney-cloud,dc=org</code>.

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstResponsiblePersonUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the persons UID, who is responsible for the maintenance. The notification will be sent to this person. For example: <code>4000002</code>. This means the information of the person is stored under the dn: <code>uid=4000002,ou=people,dc=stoney-cloud,dc=org</code>.

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstNotificationWarning
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| This multi-valued attribute will be used to turn single notifications on or off. Currently, the only allowed value is <code>maintenance</code>. The value (name) corresponds with the template dn. For example: <code>ou=maintenance,ou=templates,uid=4000000,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.

|}

Legend:
* '''x''': Mandatory in all cases.

==== Maintenance Configuration Reseller Notification Templates ====
This sub tree contains the notification templates for the maintenance service for the reseller Reseller Ltd. with the uid 4000000:
<source lang="ldif">
dn: ou=templates,uid=4000000,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
ou: templates
description: This sub tree contains the templates for the maintenance service for the reseller Reseller Ltd. with the uid 4000000.
</source>

=== Maintenance Configuration Customers ===
The sub tree for the customers specific maintenance service settings:
<source lang="ldif">
dn: ou=customers,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
ou: customer
description: The sub tree for the customer specific maintenance service settings.
</source>

The sub tree for the specific maintenance service settings for the customer Customer Ltd. with the uid 4000001.
<source lang="ldif">
dn: uid=4000000,ou=customers,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: sstCustomer
objectclass: sstServiceConfigurationObjectClass
uid: 4000000
o: Customer Ltd.
description: The sub tree for the specific maintenance service settings for the customer Customer Ltd. with the uid 4000001.
sstIsActive: TRUE
sstBelongsToResellerUID: 4000000
sstBelongsToCustomerUID: 4000001
</source>

The following table describes the different attributes:
{| style="border-spacing:0;"
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| '''Attribute'''
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Existence'''</center>
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Mandatory'''</center>
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Self-Service'''</center>
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Changeable'''</center>
| style="border:0.002cm solid #000000;padding:0.097cm;"| '''Description'''

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| uid
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| A unique integer value with 7 digits or more. For example: <code>4000001</code>. 

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| o
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The company name, for example: <code>Customer Ltd.</code>.

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| description
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The description of the leaf. 

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstIsActive
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Is the entry active? Either <code>TRUE</code> (yes) or <code>FALSE</code> (no).

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBelongsToResellerUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the reseller UID the leaf belongs to. A unique value with 7 digits or more. For example: <code>4000000</code>.

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBelongsToResellerUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the customer UID the leaf belongs to. A unique value with 7 digits or more. For example: <code>4000001</code>.

|}

Legend:
* '''x''': Mandatory in all cases.

==== Maintenance Configuration Customers Notification Settings ====
The sub tree stores the notification information for the maintenance service for the customer Customer Ltd. with the uid 4000001. This information is used as a fallback. The lookup is as follows:
# '''Unit:''' <code>uid=4000003,ou=units,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
# '''Customer:''' <code>ou=notifications,uid=4000001,ou=customers,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
# '''Reseller:''' <code>ou=notifications,uid=4000000,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
# '''Default Reseller:''' <code>ou=notifications,uid=4000000,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
The idea is, that even if somebody forgot to define something, no maintenance window will be lost or forgotten.

<source lang="ldif">
dn: ou=notifications,uid=4000001,ou=customers,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
objectclass: sstNotificationObjectClass
ou: notifications
description: The sub tree stores the notification information for the maintenance service for the customer Customer Ltd. with the uid 4000001.
sstInformPersonUID: 4000002
sstResponsiblePersonUID: 4000002
sstNotificationWarning: maintenance
</source>

The following table describes the different attributes:
{| style="border-spacing:0;"
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| '''Attribute'''
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Existence'''</center>
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Mandatory'''</center>
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Self-Service'''</center>
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Changeable'''</center>
| style="border:0.002cm solid #000000;padding:0.097cm;"| '''Description'''

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| ou
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The name of this leaf.

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| description
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The description of the leaf.

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstInformPersonUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the persons UID the notification will be sent to. For example: <code>4000002</code>. This means the information of the person is stored under the dn: <code>uid=4000002,ou=people,dc=stoney-cloud,dc=org</code>.

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstResponsiblePersonUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the persons UID, who is responsible for the maintenance. The notification will be sent to this person. For example: <code>4000002</code>. This means the information of the person is stored under the dn: <code>uid=4000002,ou=people,dc=stoney-cloud,dc=org</code>.

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstNotificationWarning
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| This multi-valued attribute will be used to turn single notifications on or off. Currently, the only allowed value is <code>maintenance</code>. The value (name) corresponds with the template dn. For example: <code>ou=maintenance,ou=templates,uid=4000001,ou=customers,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.

|}

Legend:
* '''x''': Mandatory in all cases.

==== Maintenance Configuration Customers Notification Templates ====
This sub tree contains the notification templates for the maintenance service for the customer Customer Ltd. with the uid 4000001:
<source lang="ldif">
dn: ou=templates,uid=4000001,ou=customers,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
ou: templates
description: This sub tree contains the templates for the maintenance service for the customer Customer Ltd. with the uid 4000001.
</source>

== Maintenance Units ==
The sub tree for the units of the maintenance service:
<source lang="ldif">
dn: ou=units,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
ou: units
description: The sub tree for the units of the maintenance service.
</source>

=== Maintenance Unit Example ===
Each maintenance unit has its own leaf. A monthly maintenance window is the norm.

Maintenance window every month on the second Tuesday of the month between 09:30 and 10:30, starting on Tuesday, the 14th of April 2015.
<source lang="ldif">
objectclass: top
objectclass: sstMaintenanceObjectClass
objectclass: sstRelationship
uid: 4000003
description: The maintenance leaf for the virtual machine with the uid 1234567.
sstIsActive: TRUE
sstServicePriority: 3
sstCronRepeatType: monthly     # repeat type is monthly
sstCronInterval: 1             # repeat every month
sstCronStartDate: 20150414     # starting on Monday, the 14th of April 2015
sstCronOccurrenceInMonth: 2    # second occurence
sstCronDayOfWeek: 1            # Monday
sstCronMinute: 30              # 30 Minutes past the hour
sstCronHour: 9                 # 9 am
sstCronDuration: 60            # 60 minutes (one hour)
sstInformPersonUID: 4000002
sstResponsiblePersonUID: 4000002
sstResponsibleDeputyPersonUID: 4000003
sstNotificationWarning: maintenance
sstBelongsToServiceUID: 1234567
sstBelongsToResellerUID: 4000000
sstBelongsToCustomerUID: 4000001
</source>

Other possible maintenance windows range from daily maintenance windows to bi yearly maintenance windows. The following examples just show the relevant attributes.

Maintenance window every day between 09:30 and 10:30, starting on Monday, the 5th of January 2015.
<source lang="ldif">
sstCronRepeatType: daily       # repeat type is daily
sstCronInterval: 1             # repeated every day
sstCronStartDate: 20150105     # starting on the fifth of January 2015
sstCronMinute: 30              # 30 Minutes past the hour
sstCronHour: 9                 # 9 am
sstCronDuration: 60            # 60 minutes (one hour)
</source>

Maintenance window every second day between 09:30 and 10:30, starting on Monday, the 5th of January 2015.
<source lang="ldif">
sstCronRepeatType: daily       # repeat type is daily
sstCronInterval: 2             # repeat every second day
sstCronStartDate: 20150105     # starting on the fifth of January 2015
sstCronMinute: 30              # 30 Minutes past the hour
sstCronHour: 9                 # 9 am
sstCronDuration: 60            # 60 minutes (one hour)
</source>

Maintenance window every two weeks on Monday between 09:30 and 10:30, starting on Monday, the 13th of April 2015.
<source lang="ldif">
sstCronRepeatType: weekly      # repeat type is weekly
sstCronInterval: 2             # repeat every second week
sstCronStartDate: 20150413     # starting on Monday, the 13th of April 2015
sstCronDayOfWeek: 1            # on Monday
sstCronMinute: 30              # 30 Minutes past the hour
sstCronHour: 9                 # 9 am
sstCronDuration: 60            # 60 minutes (one hour)
</source>

Maintenance window every six months on the 15. of the month between 09:30 and 10:30, starting on Wednesday, the 15th of April 2015.
<source lang="ldif">
sstCronRepeatType: monthly     # repeat type is monthly
sstCronInterval: 6             # repeat every six months
sstCronStartDate: 20150415     # starting on Wednesday, the 15th of April 2015
sstCronDayOfMonth: 15          # on the 15th day of the month
sstCronMinute: 30              # 30 Minutes past the hour
sstCronHour: 9                 # 9 am
sstCronDuration: 60            # 60 minutes (one hour)
</source>

Maintenance window every six months on the third Monday of the month between 09:30 and 10:30, starting on Monday, the 20th of April 2015.
<source lang="ldif">
sstCronRepeatType: monthly     # repeat type is monthly
sstCronInterval: 6             # repeat every six months
sstCronStartDate: 20150420     # starting on Monday, the 20th of April 2015
sstCronOccurrenceInMonth: 3    # third occurence
sstCronDayOfWeek: 1            # Monday
sstCronMinute: 30              # 30 Minutes past the hour
sstCronHour: 9                 # 9 am
sstCronDuration: 60            # 60 minutes (one hour)
</source>

Maintenance window every year on the 15th of March between 09:30 and 10:30, starting on Wednesday, the 11th of March 2015.
<source lang="ldif">
sstCronRepeatType: yearly      # repeat type is yearly
sstCronInterval: 1             # repeat every year
sstCronStartDate: 20150311     # starting on Wednesday, the 11th of March 2015
sstCronDayOfMonth: 11          # on the 11th day of the month
sstCronMinute: 30              # 30 Minutes past the hour
sstCronHour: 9                 # 9 am
sstCronDuration: 60            # 60 minutes (one hour)
</source>

Maintenance window every year on the third Monday of March between 09:30 and 10:30, starting on Monday, the 16th of March 2015.
<source lang="ldif">
sstCronRepeatType: yearly      # repeat type is yearly
sstCronInterval: 1             # repeat every year
sstCronStartDate: 20150316     # starting on Monday, the 16th of March 2015
sstCronMonthOfyear: 3          # third month of the year
sstCronOccurrenceInMonth: 3    # third occurence
sstCronDayOfWeek: 1            # Monday
sstCronMinute: 30              # 30 Minutes past the hour
sstCronHour: 9                 # 9 am
sstCronDuration: 60            # 60 minutes (one hour)
</source>

Maintenance window every two years on the third Monday of March between 09:30 and 10:30, starting on Monday, the 16th of March 2015.
<source lang="ldif">
sstCronRepeatType: yearly      # repeat type is yearly
sstCronInterval: 2             # repeat every two years
sstCronStartDate: 20150316     # starting on Monday, the 16th of March 2015
sstCronMonthOfyear: 3          # third month of the year
sstCronOccurrenceInMonth: 3    # third occurence
sstCronDayOfMonth: 1           # Monday
sstCronMinute: 30              # 30 Minutes past the hour
sstCronHour: 9                 # 9 am
sstCronDuration: 60            # 60 minutes (one hour)
</source>

The following table describes the different attributes:
{| style="border-spacing:0;"
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| '''Attribute'''
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Existence'''</center>
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Mandatory'''</center>
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Self-Service'''</center>
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Changeable'''</center>
| style="border:0.002cm solid #000000;padding:0.097cm;"| '''Description'''

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| uid
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| A unique integer value with 7 digits or more. For example: <code>4000003</code>. 

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| description
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The description of the leaf. 

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstIsActive
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Is the entry active? Either <code>TRUE</code> (yes) or <code>FALSE</code> (no).

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstServicePriority
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The maintenance service level. The possible maintenance service levels:
* <code>3</code>: Maintenance P3 [per Unit]: The Security Advisories will be installed once a month at the desired moment during the working hours (Mo. - Fr. from 09:00 - 17:00).
* <code>2</code>: Maintenance P2 [per Unit]: The Security Advisories will be installed once a month at the desired moment during the extended working hours (Mo. - Fr. from 07:00 - 19:00).
* <code>1</code>: Maintenance P1 [per Unit]: The Security Advisories will be installed once a month at the desired moment around the clock (Mo. - Su. from 00:00 - 24:00).
For more information on these maintenance service levels, visit stepping stone GmbH [http://www.stepping-stone.ch/infrastructure-as-a-service/maintenance/ web page].

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronRepeatType
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| How often is a cron job to be repeated. Valid values are: <code>daily</code>, <code>weekly</code>, <code>monthly</code>, <code>yearly</code>.

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronInterval
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The interval of a cron job. This attribute is dependant on the attribute sstCronRepeatType. Valid values are: <code>1</code> - <code>12</code>. For example: <code>2</code> could be every two days, weeks, months or years (depending on the value of the attribute <code>sstCronRepeatType</code>.

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronStartDate
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The first time a cron job is executed. This date is stored in the form of [YYYY][MM][DD] ([http://en.wikipedia.org/wiki/ISO_8601 ISO 8601]). For example: <code>2010314</code> (the 14th of March 2015).

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronDuration
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The duration of the maintenance window in minutes. Valid values are: <code>15</code> - <code>1440</code> (15 minutes to 24 hours). For example: <code>60</code>, which means 60 minutes (one hour).

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronMinute
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The number of minutes past the hour. Valid values are: <code>0</code> - <code>59</code>. For example: <code>30</code>, which means 60 minutes past the hour.

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronHour
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The number of hours. Valid values are: <code>0</code> - <code>23</code>. For example: <code>9</code>, which means 9 am, while <code>17</code> means 5 pm.

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronDayOfWeek
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Day of week (<code>0</code> - <code>6</code>), where Sunday is <code>0</code>. For example: <code>1</code>, which means Monday.

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronDayOfMonth
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The day of the month a cron job is to be executed. Valid values are: <code>1</code> - <code>31</code>. For example: <code>3</code> is the third of the month.

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronMonthOfyear
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The month of the year a cron job is to be executed. Valid values are: <code>1</code> - <code>12</code>. For example: <code>3</code> would be March.

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronOccurrenceInMonth
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The occurence of the day in a month a cron job is to be executed. Valid values are: <code>1</code> - <code>5</code>. For example: <code>3</code> would be the third occurence.

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstInformPersonUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the UID of the person to be informed if necessary. This UID can be used to look up the persons mail address, preferred language, name, surname or other information.

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstResponsiblePersonUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the UID of the person who is responsible for the system or service. This UID can be used to look up the persons mail address, preferred language, name, surname or other information.

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstNotificationWarning
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| This multi-valued attribute will be used to turn single notifications on or off. Currently, the only allowed value is <code>maintenance</code>. The value (name) corresponds with the template dn.

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBelongsToServiceUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the UID of the service the leaf belongs to. This UID can be used to look up other information. A unique value with 7 digits or more. <code>4000123</code>.

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBelongsToResellerUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the reseller UID the leaf belongs to. A unique value with 7 digits or more. For example: <code>4000000</code>.

|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBelongsToCustomerUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the customer UID the leaf belongs to. A unique value with 7 digits or more. For example: <code>4000001</code>.

|}

Legend:
* '''x''': Mandatory in all cases.

[[Category: OpenLDAP directory]]
[[Category: stoney maintenance]]