Changes - stoney cloud

stoney monitoring: OpenLDAP directory data organisation

101,449 bytes removed, 18 January

= Abstract =

This document describes the OpenLDAP directory data organisation for the '''stoney monitoring''' service, which is based on [https://www.zabbix.com/ Zabbix].

= Data Organisation =

The following chapters explain the data organisation of the stoney cloud OpenLDAP directory, in this case we looking at the '''stoney monitoring''' service, which is based on [https://www.zabbix.com/ Zabbix].

= Maintenance =

objectclass: organizationalUnit

ou: monitoring

description: The sub tree for the monitoring ~~(configuration management)~~ service, which is based on Zabbix.

</syntaxhighlight>

objectclass: organizationalUnit

ou: configuration

description: The sub tree for the configuration of the monitoring service, which is based on Zabbix.

</syntaxhighlight>

=== Maintenance - Configuration - Customers ===

The sub tree for the customers specific monitoring service settings:

dn: ou=customers,ou=configuration,ou=monitoring,ou=services,dc=stoney-cloud,dc=org

objectclass: top

</syntaxhighlight>

=== Maintenance - ~~Configuration - OpenStack projects =~~Host groups ==The sub tree for the ~~OpenStack projects specific~~ '''host groups''' of the monitoring service ~~settings~~:

dn: ou=~~projects,ou=configuration~~host groups,ou=monitoring,ou=services,dc=stoney-cloud,dc=org

objectclass: top

objectclass: organizationalUnit

ou: ~~projects~~unitsdescription: The sub tree for the ~~OpenStack projects specific~~ host groups of the monitoring service ~~settings~~, which is based on Zabbix.

</syntaxhighlight>

== Maintenance - Hosts ==The sub tree for the ~~specific~~ '''hosts''' of the monitoring service ~~settings for the OpenStack project Customer Ltd. - Public Systems with the uid 4100001.~~:

dn: ~~uid=4100001,ou=projects,ou=configuration,ou=monitoring,ou=services,dc=stoney-cloud,dc=orgobjectclass: topobjectclass: sstOpenStackProjectobjectclass: sstRelationshipuid: 4100001sstOpenStackId: 9ecb5bfdd4564f6ca52bba1e869eeea4sstOpenStackName: Customer Ltd. - Public Systemsdescription: The sub tree for the specific monitoring service settings for the OpenStack project 'Customer Ltd. - Public Systems' with the uid 4100001.sstIsActive: TRUEsstBelongsToDomainID: b01822477be64c09950022486300c59csstBelongsToResellerUID: 4000000sstBelongsToCustomerUID: 4000001</syntaxhighlight>~~ ~~The following table describes the different attributes:The following table describes the different attributes:{| style="border-spacing:0;"| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| '''Attribute'''| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| '''Objectclass'''| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Existence'''</center>| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Mandatory'''</center>| style="border:0.002cm solid #000000;padding:0.097cm;"| '''Description'''~~ |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| uid| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstOpenStackProject| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| A unique integer value with 7 digits or more. In the case of OpenStack Domains (resellers), the value of <code>uid</code> corresponds with the value of <code>sstBelongsToResellerUID</code>. ~~For example: <code>uid: 4000000</code> corresponds with <code>sstBelongsToResellerUID: 4000000</code>.~~ |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstOpenStackId| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstOpenStackProject| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The OpenStack project id as returned from the OpenStack API. ~~For example: <code>"id" : "5a3a4fd5d6e94a87815131be42d8e6d9"</code>. This gives us the LDAP entry: <code>sstOpenStackId: 5a3a4fd5d6e94a87815131be42d8e6d9</code>.~~ |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstOpenStackName| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstOpenStackProject| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The OpenStack project name as returned from the OpenStack API. ~~For example: <code>"name" : "Customer Ltd. - Public Systems"</code>. This gives us the LDAP entry: <code>sstOpenStackName: Customer Ltd. - Public Systems</code>.~~ |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| description| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstOpenStackProject| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The description of the leaf.~~ ~~For example: <code>The sub tree for the specific monitoring service settings for the OpenStack project 'Customer Ltd. - Public Systems' with the uid 4100001.</code>~~ |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstIsActive| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstOpenStackProject| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Is the entry active? Either <code>TRUE</code> (yes) or <code>FALSE</code> (no). ~~The default value is <code>TRUE</code>.~~ |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBelongsToDomainID| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstOpenStackProject| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The OpenStack domain id the project belongs to.~~ ~~For example: <code>sstBelongsToDomainID: b01822477be64c09950022486300c59c</code>.~~ |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBelongsToResellerUID| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the reseller UID the leaf belongs to. A unique integer value with 7 digits or more. In the case of OpenStack Domains (resellers), the value of <code>sstBelongsToResellerUID</code> corresponds with the value of <code>uid</code>. ~~For example: <code>sstBelongsToResellerUID: 4000000</code> corresponds with <code>uid: 4000000</code>.~~ |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBelongsToCustomerUID| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the customer UID the leaf belongs to. A unique value with 7 digits or more, must correspond with the uid entry. Each reseller is also a customer in the LDAP directory. Therefore, the value of the attribute <code>sstBelongsToCustomerUID</code> should always be set to the customer UID, that reflects the reseller for the OpenStack Domains. ~~For example: <code>sstBelongsToCustomerUID: 4000001</code>.~~ |} ~~Legend:~~* '''x''': Mandatory in all cases. ~~==== Maintenance - Configuration - OpenStack projects - Defaults ====~~This sub tree stores the default settings for the stoney monitoring service for the OpenStack project 'Customer Ltd. - Internal Systems' with OpenStack id '5a3a4fd5d6e94a87815131be42d8e6d9' and with the OpenStack project uid '4000001'. ~~The configuration below tells us the following:~~* We have a monitoring window range (as <code>sstCronMinuteEnd</code> and <code>sstCronHourEnd</code> are set).* The monitoring window is executed every 2nd Tuesday of every month.* The monitoring windows can start a 09:30 and must end at 13:45 and takes 1 hour (60 minutes).* A reminder will be sent to 'Support stepping stone AG <support@stepping-stone.ch>'. ~~The lookup of the default settings for the stoney monitoring service is as follows:# '''Service roles:''' <code>ou=defaults,ou=stoney_office,ou=roles,ou=configuration,ou=monitoring,ou=services,dc=stoney-cloud,dc=org</code>.# '''OpenStack project:''' <code>ou=defaults,uid=4100000,ou=projects,ou=configuration,ou=monitoring,ou=services,dc=stoney-cloud,dc=org</code>.# '''Customer:''' <code>ou=defaults,uid=4000001,ou=projects,ou=configuration,ou=monitoring,ou=services,dc=stoney-cloud,dc=org</code>.# '''Reseller:''' <code>ou=defaults,uid=4000000,ou=reseller,ou=configuration,ou=monitoring,ou=services,dc=stoney-cloud,dc=org</code>.~~ For example: If no monitoring values or only a subset of monitoring values are set by the provisioning api (or provisioning script), an missing values are first looked up in the '''service roles''' sub tree. If there are still missing values, the next lookup occurs in the '''OpenStack project''' subtree. Once again, if there are still missing values, the next lookup occurs in the '''customer''' sub tree. If there are still missing values, the final lookup occurs in the '''reseller''' sub tree. If there are still missing values, the provisioning api (or provisioning script) must inform the calling instance (this would normally be a human). ~~<syntaxhighlight lang='ldif'>dn: ou=defaults,uid=4000001,ou=projects,~~ou=~~configuration~~hosts,ou=monitoring,ou=services,dc=stoney-cloud,dc=org

objectclass: top

objectclass: organizationalUnit

~~objectclass: sstMaintenanceDefaultsObjectClassobjectclass: sstNotificationObjectClassobjectclass: sstRelationship~~ou: ~~defaults~~unitsdescription: ~~This~~ The sub tree ~~stores the default settings~~ for the ~~stoney~~ hosts of the monitoring service ~~for the OpenStack project 'Customer Ltd. - Internal Systems' with OpenStack id '5a3a4fd5d6e94a87815131be42d8e6d9' and with the OpenStack project uid '4000001'.sstIsActive: TRUE # MAY: The default is always TRUE, otherwise why bother?~~ ~~sstServicePriority: 3 # MAY: We always set this~~, ~~in case sstServiceAutomated~~ which is ~~set to FALSE (as a fall-back position)sstServiceAutomated: TRUE # MAY: Depending~~ based on ~~the reseller, we either have TRUE or FALSE~~Zabbix. ~~If sstServiceAutomated is not set, we presume FALSEsstCronRepeatType: monthly # MAY: repeat type is monthlysstCronInterval: 1 # MAY: repeat every monthsstCronOccurrenceInMonth: 2 # MAY: second occurencesstCronDayOfWeek: 2 # MAY: TuesdaysstCronMinute: 30 # MAY: 30 Minutes past the hoursstCronMinuteEnd: 45 # MAY: 45 Minutes past the hour (new attribute, for if we have a range: 09:30 - 13:45)sstCronHour: 9 # MAY: 9 amsstCronHourEnd: 13 # MAY: 1 pm (new attribute, for if we have a range: 09:30 - 13:45)~~ ~~sstCronDuration: 60 # MAY: 60 minutes (one hour)sstNotificationWarning: reminder # MAY: We alway set this (Multi-valued attribute).sstInformPersonUID: 1000482 # MAY: Support stepping stone AG (support@stepping-stone.ch)sstResponsiblePersonUID: 1000482 # MAY: Support stepping stone AG (support@stepping-stone.ch)sstResponsibleDeputyPersonUID: 1000482 # MAY: Support stepping stone AG (support@stepping-stone.ch)sstBelongsToResellerUID: 4000000sstBelongsToCustomerUID: 4000001~~

</syntaxhighlight>

~~The following table describes the different attributes:{| style~~=~~"border-spacing:0;"| style~~=~~"border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| '''Attribute'''| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| '''Objectclass'''| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Existence'''</center>| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Mandatory'''</center>| style="border:0.002cm solid #000000;padding:0.097cm;"| '''Description'''~~ |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| description| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The description of the leaf.~~ |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstIsActive| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Is the entry active? Either <code>TRUE</code> (yes) or <code>FALSE</code> (no). |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstServicePriority| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The monitoring service level. The possible monitoring service levels (1, 2 or 3):* <code>3</code>: Maintenance ~~P3 [per Unit]: The Security Advisories will be installed once a month at the desired moment during the working hours (Monday to Friday from 09:00~~ - ~~12:00 and 13:00 - 17:00).~~* <code>2</code>: Maintenance P2 [per Unit]: The Security Advisories will be installed once a month at the desired moment during the extended working hours (Monday to Friday from 07:00 - 12:00 and 13:00 - 19:00).* <code>1</code>: Maintenance P1 [per Unit]: The Security Advisories will be installed once a month at the desired moment around the clock (Monday to Sunday from 00:00 - 24:00).~~For more information on these monitoring service levels, visit stepping stone GmbH [http://www.stepping-stone.ch/infrastructure-as-a-service/monitoring/ web page].~~ ~~If the attribute <code>sstServiceAutomated</code> is set to <code>TRUE</code>, the <code>sstServicePriority</code> will be ignored. And we will have automated monitoring windows in the form of:~~* Maintenance Automated (vcs_gitlab) [per Unit]: The Security Advisories will be installed once a month at the desired moment around the clock (Monday to Sunday from 00:00 - 24:00). |-~~| style~~User groups =~~"border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstServiceAutomated| style~~=~~"border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| A monitoring window is either executed automatically:* <code>sstServiceAutomated: TRUE</code>~~or manually:~~* <code>sstServiceAutomated: FALSE</code>~~If the attribute <code>sstServiceAutomated</code> does not exist, presume <code>FALSE</code>.~~ |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronRepeatType| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| How often is a cron job to be repeated. Valid values are: <code>daily</code>, <code>weekly</code>, <code>monthly</code>, <code>yearly</code>. |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronInterval| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"|~~ The interval of a cron job. This attribute is dependant on the attribute sstCronRepeatType. Valid values are: <code>1</code> - <code>12</code>. For example: <code>2</code> could be every two days, weeks, months or years (depending on the value of the attribute <code>sstCronRepeatType</code>. |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronOccurrenceInMonth| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The occurence of the day in a month a cron job is to be executed. Valid values are: <code>1</code> - <code>4</code>. For example: <code>3</code> would be the third occurence. If you use a value higher than 4, the calculation will fail in months, which only have 4 same days (sub tree for ~~example February will never have 5 Mondays ...).~~ |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronDayOfWeek| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Day of week (<code>0</code> - <code>6</code>), where Sunday is <code>0</code>. For example: <code>1</code>, which means Monday. |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronMinute| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The number of minutes past~~ the ~~hour that the monitoring window must start.~~ ~~Valid values are: <code>0</code> - <code>59</code>. For example: <code>30</code>, which means 30 minutes past the hour.~~ ~~If the attribute <code>sstCronMinuteEnd</code> is set, then <code>sstCronMinute</code> is interpreted as the start of a monitoring window minute range.~~ |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronMinuteEnd| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The number of minutes past the hour that the monitoring window must end (minus the duration defined with attribute <code>sstCronDuration>/code>). Valid values are: <code>0</code> - <code>59</code>. ~~For example: <code>45</code>, which means 45 minutes past the hour.~~ ~~If this attribute is set, it is interpreted as the end of a monitoring window minute range, while <code>sstCronMinute</code> is interpreted as the start of a monitoring window minute range.~~ |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronHour| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The hour the monitoring window must start.~~ ~~Valid values are: <code>0</code> - <code>23</code>. For example: <code>9</code>, which means 9 am, while <code>17</code> means 5 pm.~~ ~~If the attribute <code>sstCronHourEnd</code> is set, then <code>sstCronMinute</code> is interpreted as the start of a monitoring window hour range.~~ |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronHourEnd| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The hour the monitoring window must end.~~ ~~Valid values are: <code>0</code> - <code>23</code>. For example: <code>9</code>, which means 9 am, while <code>17</code> means 5 pm.~~ If this attribute is set, it is interpreted as the end of a monitoring window hour range, while <code>sstCronHour</code> is interpreted as the start of a monitoring window hour range. Therefore, the latest monitoring window can start at <coode>sstCronHourEnd</code> minus the duration defined with attribute <code>sstCronDuration</code>. |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronDuration| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The duration of the monitoring window in minutes. Valid values are: <code>15</code> - <code>1440</code> (15 minutes to 24 hours). For example: <code>60</code>, which means 60 minutes (one hour). |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstNotificationWarning| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstNotificationObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| This multi-valued attribute will be used to turn single notifications on or off. Currently, the only allowed value is <code>reminder</code>. The value (name) corresponds with the template dn. |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstInformPersonUID| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the UID of the person to be informed if necessary. This UID can be used to look up the persons mail address, preferred language, name, surname or other information. ~~As this attribute is multi-valued, the lookups will continue, even if this attribute is set.~~ |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstResponsiblePersonUID| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the UID of the person who is responsible for the system or service. This UID can be used to look up the persons mail address, preferred language, name, surname or other information. |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstResponsibleDeputyPersonUID| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the UID of the deputy of the person who is responsible for the system or service. This UID can be used to look up the persons mail address, preferred language, name, surname or other information. |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBelongsToResellerUID| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the reseller UID the leaf belongs to. A unique integer value with 7 digits or more. In the case of OpenStack Domains (resellers), the value of <code>sstBelongsToResellerUID</code> corresponds with the value of <code>uid</code>. ~~For example: <code>sstBelongsToResellerUID: 4000000</code> corresponds with <code>uid: 4000000</code>.~~ |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBelongsToCustomerUID| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the customer UID the leaf belongs to. A unique value with 7 digits or more, must correspond with the uid entry. Each reseller is also a customer in the LDAP directory. Therefore, the value of the attribute <code>sstBelongsToCustomerUID</code> should always be set to the customer UID, that reflects the reseller for the OpenStack Domains. ~~For example: <code>sstBelongsToCustomerUID: 4000001</code>.~~ |} ~~Legend:~~* '''xuser groups'''~~: Mandatory in all cases.~~ ~~=== Maintenance - Configuration - Service (Puppet) roles ===The sub tree for~~ of the ~~service (Puppet) roles specific~~ monitoring service ~~settings~~:

dn: ou=~~roles,ou=configuration~~user groups,ou=monitoring,ou=services,dc=stoney-cloud,dc=org

objectclass: top

objectclass: organizationalUnit

ou: ~~roles~~unitsdescription: The sub tree for the ~~service (Puppet) roles specific~~ user groups of the monitoring service ~~settings~~, which is based on Zabbix.

</syntaxhighlight>

== Maintenance - Actions ==The sub tree ~~of the specific monitoring service settings~~ for the ~~stoney office service (Puppet) role called~~ '~~stoney_office~~' ~~(Puppet roles don~~'~~t contain spaces).~~actions''' of the monitoring service:

dn: ou=~~stoney_office,ou=roles,ou=configuration,ou=monitoring,ou=services,dc=stoney-cloud,dc=orgobjectclass: topobjectclass: organizationalUnitobjectclass: sstServiceConfigurationObjectClassou: stoney_officedescription: The sub tree of the specific monitoring service settings for the stoney office service (Puppet) role called 'stoney_office'.sstIsActive: TRUEsstIsDefault: TRUE</syntaxhighlight>~~ ~~The following table describes the different attributes:{| style="border-spacing:0;"| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| '''Attribute'''| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| '''Objectclass'''| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Existence'''</center>| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Mandatory'''</center>| style="border:0.002cm solid #000000;padding:0.097cm;"| '''Description'''~~ |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| ou| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| organizationalUnit| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The name of the service (Puppet) role.~~ ~~For example: <code>ou: stoney_office</code> (Puppet roles don't contain spaces).~~ |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| description| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| organizationalUnit| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The description of the leaf.~~ ~~For example: <code>The sub tree of the specific monitoring service settings for the stoney office service (Puppet) role called 'stoney_office'.</code>~~ |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstIsActive| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstServiceConfigurationObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Is the entry active? Either <code>TRUE</code> (yes) or <code>FALSE</code> (no). ~~The default value is <code>TRUE</code>.~~ |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstIsDefault| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstServiceConfigurationObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Contains the leaf a default entry? Either <code>TRUE</code> (yes) or <code>FALSE</code> (no). ~~If <code>sstIsDefault</code> is set to <code>TRUE</code>, the information of this subtree must alway be used (to make sure, that all automated monitoring windows are executed in the same time frame).~~ |} ~~Legend:~~* '''x''': Mandatory in all cases. ~~==== Maintenance - Configuration - service (Puppet) roles - Defaults ====This sub tree stores the default settings for the stoney monitoring service settings for the stoney office service (Puppet) role called 'stoney_office'.~~ ~~The configuration below tells us the following:~~* We have a monitoring window range (as <code>sstCronMinuteEnd</code> and <code>sstCronHourEnd</code> are set).* The monitoring window is executed every 2nd Wednesday of every month.* The monitoring windows can start a 03:00 and must end at 05:00 and takes half an hour (30 minutes).* A reminder will be sent to 'Support stepping stone AG <support@stepping-stone.ch>'. ~~The lookup of the default settings for the stoney monitoring service is as follows:# '''Service roles:''' <code>ou=defaults,ou=stoney_office,ou=roles,ou=configuration,ou=monitoring,ou=services,dc=stoney-cloud,dc=org</code>.# '''OpenStack project:''' <code>ou=defaults,uid=4100000,ou=roles,ou=configuration,ou=monitoring,ou=services,dc=stoney-cloud,dc=org</code>.# '''Customer:''' <code>ou=defaults,uid=4000001,ou=roles,ou=configuration,ou=monitoring,ou=services,dc=stoney-cloud,dc=org</code>.# '''Reseller:''' <code>ou=defaults,uid=4000000,ou=reseller,ou=configuration,ou=monitoring,ou=services,dc=stoney-cloud,dc=org</code>.~~ For example: If no monitoring values or only a subset of monitoring values are set by the provisioning api (or provisioning script), an missing values are first looked up in the '''service roles''' sub tree. If there are still missing values, the next lookup occurs in the '''OpenStack project''' subtree. Once again, if there are still missing values, the next lookup occurs in the '''customer''' sub tree. If there are still missing values, the final lookup occurs in the '''reseller''' sub tree. If there are still missing values, the provisioning api (or provisioning script) must inform the calling instance (this would normally be a human). ~~<syntaxhighlight lang='ldif'>dn: ou=defaults,ou=stoney_office,ou=roles,ou=configuration,ou=monitoring,ou=services,dc=stoney-cloud,dc=orgobjectclass: topobjectclass: organizationalUnitobjectclass: sstMaintenanceDefaultsObjectClassobjectclass: sstNotificationObjectClassobjectclass: sstRelationshipou: defaults~~description: This sub tree stores the default settings for the stoney monitoring service settings for the stoney office service (Puppet) role called 'stoney_office'. Please be aware, that this is the production definition. The integration (test) definition is the same, except that the sstCronOccurrenceInMonth attribute is 1 instead of 2 (a week before).~~sstIsActive: TRUE # MAY: The default is always TRUE, otherwise why bother?~~ ~~sstServicePriority: 3 # MAY: We always set this, in case sstServiceAutomated is set to FALSE (as a fall-back position)sstServiceAutomated: TRUE # MAY: Depending on the reseller, we either have TRUE or FALSE. If sstServiceAutomated is not set, we presume FALSEsstCronRepeatType: monthly # MAY: repeat type is monthlysstCronInterval: 1 # MAY: repeat every monthsstCronOccurrenceInMonth: 2 # MAY: second occurencesstCronDayOfWeek: 3 # MAY: WednesdaysstCronMinute: 0 # MAY: 0 Minutes past the hoursstCronMinuteEnd: 0 # MAY: 0 Minutes past the hour (new attribute, for if we have a range: 03:00 - 05:00)sstCronHour: 3 # MAY: 3 amsstCronHourEnd: 5 # MAY: 5 am (new attribute, for if we have a range: 03:00 - 05:00)~~ ~~sstCronDuration: 30 # MAY: 30 minutes (half an hour)sstNotificationWarning: reminder # MAY: We alway set this (Multi-valued attribute).sstInformPersonUID: 1000482 # MAY: Support stepping stone AG (support@stepping-stone.ch)sstResponsiblePersonUID: 1000482 # MAY: Support stepping stone AG (support@stepping-stone.ch)sstResponsibleDeputyPersonUID: 1000482 # MAY: Support stepping stone AG (support@stepping-stone.ch)</syntaxhighlight>~~ ~~The following table describes the different attributes:{| style="border-spacing:0;"| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| '''Attribute'''| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| '''Objectclass'''| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Existence'''</center>| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Mandatory'''</center>| style="border:0.002cm solid #000000;padding:0.097cm;"| '''Description'''~~ |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| description| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The description of the leaf.~~ |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstIsActive| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Is the entry active? Either <code>TRUE</code> (yes) or <code>FALSE</code> (no). |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstServicePriority| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The monitoring service level. The possible monitoring service levels (1, 2 or 3):* <code>3</code>: Maintenance P3 [per Unit]: The Security Advisories will be installed once a month at the desired moment during the working hours (Monday to Friday from 09:00 - 12:00 and 13:00 - 17:00).* <code>2</code>: Maintenance P2 [per Unit]: The Security Advisories will be installed once a month at the desired moment during the extended working hours (Monday to Friday from 07:00 - 12:00 and 13:00 - 19:00).* <code>1</code>: Maintenance P1 [per Unit]: The Security Advisories will be installed once a month at the desired moment around the clock (Monday to Sunday from 00:00 - 24:00).~~For more information on these monitoring service levels, visit stepping stone GmbH [http://www.stepping-stone.ch/infrastructure-as-a-service/monitoring/ web page].~~ ~~If the attribute <code>sstServiceAutomated</code> is set to <code>TRUE</code>, the <code>sstServicePriority</code> will be ignored. And we will have automated monitoring windows in the form of:~~* Maintenance Automated (vcs_gitlab) [per Unit]: The Security Advisories will be installed once a month at the desired moment around the clock (Monday to Sunday from 00:00 - 24:00). |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstServiceAutomated| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| A monitoring window is either executed automatically:* <code>sstServiceAutomated: TRUE</code>~~or manually:~~* <code>sstServiceAutomated: FALSE</code>~~If the attribute <code>sstServiceAutomated</code> does not exist, presume <code>FALSE</code>.~~ |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronRepeatType| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| How often is a cron job to be repeated. Valid values are: <code>daily</code>, <code>weekly</code>, <code>monthly</code>, <code>yearly</code>. |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronInterval| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The interval of a cron job. This attribute is dependant on the attribute sstCronRepeatType. Valid values are: <code>1</code> - <code>12</code>. For example: <code>2</code> could be every two days, weeks, months or years (depending on the value of the attribute <code>sstCronRepeatType</code>. |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronOccurrenceInMonth| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The occurence of the day in a month a cron job is to be executed. Valid values are: <code>1</code> - <code>4</code>. For example: <code>3</code> would be the third occurence. If you use a value higher than 4, the calculation will fail in months, which only have 4 same days (for example February will never have 5 Mondays ...). |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronDayOfWeek| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Day of week (<code>0</code> - <code>6</code>), where Sunday is <code>0</code>. For example: <code>1</code>, which means Monday. |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronMinute| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The number of minutes past the hour that the monitoring window must start. ~~Valid values are: <code>0</code> - <code>59</code>. For example: <code>30</code>, which means 30 minutes past the hour.~~ ~~If the attribute <code>sstCronMinuteEnd</code> is set, then <code>sstCronMinute</code> is interpreted as the start of a monitoring window minute range.~~ |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronMinuteEnd| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The number of minutes past the hour that the monitoring window must end (minus the duration defined with attribute <code>sstCronDuration>/code>). Valid values are: <code>0</code> - <code>59</code>. ~~For example: <code>45</code>, which means 45 minutes past the hour.~~ ~~If this attribute is set, it is interpreted as the end of a monitoring window minute range, while <code>sstCronMinute</code> is interpreted as the start of a monitoring window minute range.~~ |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronHour| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The hour the monitoring window must start.~~ ~~Valid values are: <code>0</code> - <code>23</code>. For example: <code>9</code>, which means 9 am, while <code>17</code> means 5 pm.~~ ~~If the attribute <code>sstCronHourEnd</code> is set, then <code>sstCronMinute</code> is interpreted as the start of a monitoring window hour range.~~ |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronHourEnd| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The hour the monitoring window must end (minus the duration defined with attribute <code>sstCronDuration>/code>). ~~Valid values are: <code>0</code> - <code>23</code>. For example: <code>9</code>, which means 9 am, while <code>17</code> means 5 pm.~~ ~~If this attribute is set, it is interpreted as the end of a monitoring window hour range, while <code>sstCronHour</code> is interpreted as the start of a monitoring window hour range.~~ |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronDuration| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The duration of the monitoring window in minutes. Valid values are: <code>15</code> - <code>1440</code> (15 minutes to 24 hours). For example: <code>60</code>, which means 60 minutes (one hour). |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstNotificationWarning| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstNotificationObjectClass| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| This multi-valued attribute will be used to turn single notifications on or off. Currently, the only allowed value is <code>reminder</code>. The value (name) corresponds with the template dn. |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstInformPersonUID| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the UID of the person to be informed if necessary. This UID can be used to look up the persons mail address, preferred language, name, surname or other information. ~~As this attribute is multi-valued, the lookups will continue, even if this attribute is set.~~ |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstResponsiblePersonUID| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the UID of the person who is responsible for the system or service. This UID can be used to look up the persons mail address, preferred language, name, surname or other information. |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstResponsibleDeputyPersonUID| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the UID of the deputy of the person who is responsible for the system or service. This UID can be used to look up the persons mail address, preferred language, name, surname or other information. |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBelongsToResellerUID| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the reseller UID the leaf belongs to. A unique integer value with 7 digits or more. In the case of OpenStack Domains (resellers), the value of <code>sstBelongsToResellerUID</code> corresponds with the value of <code>uid</code>. ~~For example: <code>sstBelongsToResellerUID: 4000000</code> corresponds with <code>uid: 4000000</code>.~~ ~~For the service (Puppet) roles this attribute must not be set, as the content of this value must be taken from either the OpenStack project, the customer or the reseller.~~ |-~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBelongsToCustomerUID| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the customer UID the leaf belongs to. A unique value with 7 digits or more, must correspond with the uid entry. Each reseller is also a customer in the LDAP directory. Therefore, the value of the attribute <code>sstBelongsToCustomerUID</code> should always be set to the customer UID, that reflects the reseller for the OpenStack Domains. ~~For example: <code>sstBelongsToCustomerUID: 4000001</code>.~~ ~~For the service (Puppet) roles this attribute must not be set, as the content of this value must be taken from either the OpenStack project, the customer or the reseller.~~ |} ~~Legend:~~* '''x''': Mandatory in all cases. ~~== Maintenance - Units ==The sub tree for the units of the monitoring service:<syntaxhighlight lang='ldif'>dn: ou=units~~actions,ou=monitoring,ou=services,dc=stoney-cloud,dc=org

objectclass: top

objectclass: organizationalUnit

ou: units

description: The sub tree for the ~~units~~ actions of the monitoring service, which is based on Zabbix.

</syntaxhighlight>

~~=== Maintenance - Units example ===~~

~~Each monitoring unit has its own leaf. A monthly monitoring window is the norm.~~

~~Maintenance window every month on the second Tuesday of the month between 09:30 and 10:30, starting on Tuesday, the 14th of April 2015.~~

~~The '''sstBelongsToServiceUID''' lookup is as follows:~~

~~# '''OpenStack unit''' (server): <code>ou=units,ou=openstack,ou=services,dc=stoney-cloud,dc=org</code>.~~

~~# '''Virtual Machine:''' <code>ou=virtual machines,ou=virtualization,ou=services,dc=stoney-cloud,dc=org</code>.~~

~~# '''vServer:''' <code>ou=vservers,ou=services,dc=stoney-cloud,dc=org</code>.~~

~~# '''Dedicated Server:''' <code>ou=dedicated servers,ou=services,dc=stoney-cloud,dc=org</code> (not implemented yet).~~

~~# '''External Server:''' <code>ou=external servers,ou=services,dc=stoney-cloud,dc=org</code> (not implemented yet).~~

~~The idea is, that we presume, that most of the monitoring units belong to OpenStack units (servers) running on our OpenStack based stoney cloud installation.~~

In the example below, the service UID <code>sstBelongsToServiceUID: 1234567</code> points to [[stoney_conductor:_OpenLDAP_directory_data_organisation#Virtual_Machine | virtual machine]] with the <code>b543f88f-dffe-426f-86d3-c7ff85c16d2a</code> and the <code>uid: 1234567</code>.

~~<syntaxhighlight lang='ldif'>~~

~~dn: uid=4000003,ou=units,ou=monitoring,ou=services,dc=stoney-cloud,dc=org~~

~~objectclass: top~~

~~objectclass: sstMaintenanceObjectClass~~

~~objectclass: sstRelationship~~

~~uid: 4000003~~

~~description: The monitoring leaf for the virtual machine with the uid 1234567.~~

~~sstIsActive: TRUE~~

~~sstBillable: TRUE~~

~~sstServicePriority: 3~~

~~sstServiceAutomated: TRUE~~

~~sstCronRepeatType: monthly # repeat type is monthly~~

~~sstCronInterval: 1 # repeat every month~~

~~sstCronStartDate: 20150414 # starting on Tuesday, the 14th of April 2015~~

~~sstCronOccurrenceInMonth: 2 # second occurence~~

~~sstCronDayOfWeek: 2 # Tuesday~~

~~sstCronMinute: 30 # 30 Minutes past the hour~~

~~sstCronHour: 9 # 9 am~~

~~sstCronDuration: 60 # 60 minutes (one hour)~~

~~sstInformPersonUID: 4000002~~

~~sstResponsiblePersonUID: 4000002~~

~~sstResponsibleDeputyPersonUID: 4000002~~

~~sstNotificationWarning: reminder~~

~~sstIsMultiTenant: FALSE~~

~~sstBelongsToServiceUID: 1234567~~

~~sstBelongsToResellerUID: 4000000~~

~~sstBelongsToCustomerUID: 4000001~~

~~</syntaxhighlight>~~

~~Other possible monitoring windows range from daily monitoring windows to bi yearly monitoring windows. The following examples just show the relevant attributes.~~

~~Maintenance window every day between 09:30 and 10:30, starting on Monday, the 5th of January 2015.~~

~~<syntaxhighlight lang='ldif'>~~

~~sstCronRepeatType: daily # repeat type is daily~~

~~sstCronInterval: 1 # repeated every day~~

~~sstCronStartDate: 20150105 # starting on the fifth of January 2015~~

~~sstCronMinute: 30 # 30 Minutes past the hour~~

~~sstCronHour: 9 # 9 am~~

~~sstCronDuration: 60 # 60 minutes (one hour)~~

~~</syntaxhighlight>~~

~~Maintenance window every second day between 09:30 and 10:30, starting on Monday, the 5th of January 2015.~~

~~<syntaxhighlight lang='ldif'>~~

~~sstCronRepeatType: daily # repeat type is daily~~

~~sstCronInterval: 2 # repeat every second day~~

~~sstCronStartDate: 20150105 # starting on the fifth of January 2015~~

~~sstCronMinute: 30 # 30 Minutes past the hour~~

~~sstCronHour: 9 # 9 am~~

~~sstCronDuration: 60 # 60 minutes (one hour)~~

~~</syntaxhighlight>~~

~~Maintenance window every two weeks on Monday between 09:30 and 10:30, starting on Monday, the 13th of April 2015.~~

~~<syntaxhighlight lang='ldif'>~~

~~sstCronRepeatType: weekly # repeat type is weekly~~

~~sstCronInterval: 2 # repeat every second week~~

~~sstCronStartDate: 20150413 # starting on Monday, the 13th of April 2015~~

~~sstCronDayOfWeek: 1 # on Monday~~

~~sstCronMinute: 30 # 30 Minutes past the hour~~

~~sstCronHour: 9 # 9 am~~

~~sstCronDuration: 60 # 60 minutes (one hour)~~

~~</syntaxhighlight>~~

~~Maintenance window every six months on the 15. of the month between 09:30 and 10:30, starting on Wednesday, the 15th of April 2015.~~

~~<syntaxhighlight lang='ldif'>~~

~~sstCronRepeatType: monthly # repeat type is monthly~~

~~sstCronInterval: 6 # repeat every six months~~

~~sstCronStartDate: 20150415 # starting on Wednesday, the 15th of April 2015~~

~~sstCronDayOfMonth: 15 # on the 15th day of the month~~

~~sstCronMinute: 30 # 30 Minutes past the hour~~

~~sstCronHour: 9 # 9 am~~

~~sstCronDuration: 60 # 60 minutes (one hour)~~

~~</syntaxhighlight>~~

~~Maintenance window every six months on the third Monday of the month between 09:30 and 10:30, starting on Monday, the 20th of April 2015.~~

~~<syntaxhighlight lang='ldif'>~~

~~sstCronRepeatType: monthly # repeat type is monthly~~

~~sstCronInterval: 6 # repeat every six months~~

~~sstCronStartDate: 20150420 # starting on Monday, the 20th of April 2015~~

~~sstCronOccurrenceInMonth: 3 # third occurence~~

~~sstCronDayOfWeek: 1 # Monday~~

~~sstCronMinute: 30 # 30 Minutes past the hour~~

~~sstCronHour: 9 # 9 am~~

~~sstCronDuration: 60 # 60 minutes (one hour)~~

~~</syntaxhighlight>~~

~~Maintenance window every year on the 15th of March between 09:30 and 10:30, starting on Wednesday, the 11th of March 2015.~~

~~<syntaxhighlight lang='ldif'>~~

~~sstCronRepeatType: yearly # repeat type is yearly~~

~~sstCronInterval: 1 # repeat every year~~

~~sstCronStartDate: 20150311 # starting on Wednesday, the 11th of March 2015~~

~~sstCronDayOfMonth: 11 # on the 11th day of the month~~

~~sstCronMinute: 30 # 30 Minutes past the hour~~

~~sstCronHour: 9 # 9 am~~

~~sstCronDuration: 60 # 60 minutes (one hour)~~

~~</syntaxhighlight>~~

~~Maintenance window every year on the third Monday of March between 09:30 and 10:30, starting on Monday, the 16th of March 2015.~~

~~<syntaxhighlight lang='ldif'>~~

~~sstCronRepeatType: yearly # repeat type is yearly~~

~~sstCronInterval: 1 # repeat every year~~

~~sstCronStartDate: 20150316 # starting on Monday, the 16th of March 2015~~

~~sstCronMonthOfyear: 3 # third month of the year~~

~~sstCronOccurrenceInMonth: 3 # third occurence~~

~~sstCronDayOfWeek: 1 # Monday~~

~~sstCronMinute: 30 # 30 Minutes past the hour~~

~~sstCronHour: 9 # 9 am~~

~~sstCronDuration: 60 # 60 minutes (one hour)~~

~~</syntaxhighlight>~~

~~Maintenance window every two years on the third Monday of March between 09:30 and 10:30, starting on Monday, the 16th of March 2015.~~

~~<syntaxhighlight lang='ldif'>~~

~~sstCronRepeatType: yearly # repeat type is yearly~~

~~sstCronInterval: 2 # repeat every two years~~

~~sstCronStartDate: 20150316 # starting on Monday, the 16th of March 2015~~

~~sstCronMonthOfyear: 3 # third month of the year~~

~~sstCronOccurrenceInMonth: 3 # third occurence~~

~~sstCronDayOfMonth: 1 # Monday~~

~~sstCronMinute: 30 # 30 Minutes past the hour~~

~~sstCronHour: 9 # 9 am~~

~~sstCronDuration: 60 # 60 minutes (one hour)~~

~~</syntaxhighlight>~~

~~The following table describes the different attributes:~~

~~{| style="border-spacing:0;"~~

~~| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| '''Attribute'''~~

~~| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| '''Objectclass'''~~

~~| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Existence'''</center>~~

~~| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Mandatory'''</center>~~

~~| style="border:0.002cm solid #000000;padding:0.097cm;"| '''Description'''~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| uid~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClass~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>~~

| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| A unique integer value with 7 digits or more. For example: <code>4000003</code>.

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| description~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClass~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The description of the leaf.~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstIsActive~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClass~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>~~

| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Is the entry active? Either <code>TRUE</code> (yes) or <code>FALSE</code> (no).

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBillable~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>~~

| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| It the entry billable? Either <code>TRUE</code> (yes) or <code>FALSE</code> (no). All hierarchical levels must have <code>sstBillable: TRUE</code> to actually have an invoice generated and sent. If the attribute <code>sstBillable</code> doesn't exist, the default is <code>TRUE</code>. This way, we are forced to set a reseller, customer or product manually to <code>sstBillable: FALSE</code> if we want to avoid sending them an invoice.

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCancellationDate~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~

| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The cancellation date of a reseller, customer or service in the form of [YYYY][MM][DD] (ISO 8601). For example: '''20201231'''.

The attribute <code>sstCancellationDate</code> is used in a logical AND combination with <code>sstIsActive</code>. With other words: Once the cancellation date has passed, it overrides the <code>sstIsActive</code> value.

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstServicePriority~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClass~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>~~

| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The monitoring service level. The possible monitoring service levels (1, 2 or 3):

* <code>3</code>: Maintenance P3 [per Unit]: The Security Advisories will be installed once a month at the desired moment during the working hours (Monday to Friday from 09:00 - 12:00 and 13:00 - 17:00).

* <code>2</code>: Maintenance P2 [per Unit]: The Security Advisories will be installed once a month at the desired moment during the extended working hours (Monday to Friday from 07:00 - 12:00 and 13:00 - 19:00).

* <code>1</code>: Maintenance P1 [per Unit]: The Security Advisories will be installed once a month at the desired moment around the clock (Monday to Sunday from 00:00 - 24:00).

~~For more information on these monitoring service levels, visit stepping stone GmbH [http://www.stepping-stone.ch/infrastructure-as-a-service/monitoring/ web page].~~

~~If the attribute <code>sstServiceAutomated</code> is set to <code>TRUE</code>, the <code>sstServicePriority</code> will be ignored. And we will have automated monitoring windows in the form of:~~

* Maintenance Automated (vcs_gitlab) [per Unit]: The Security Advisories will be installed once a month at the desired moment around the clock (Monday to Sunday from 00:00 - 24:00).

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstServiceAutomated~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClass~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~

| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| A monitoring window is either executed automatically:

* <code>sstServiceAutomated: TRUE</code>

~~or manually:~~

* <code>sstServiceAutomated: FALSE</code>

~~If the attribute <code>sstServiceAutomated</code> does not exist, presume <code>FALSE</code>.~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronRepeatType~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClass~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>~~

| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| How often is a cron job to be repeated. Valid values are: <code>daily</code>, <code>weekly</code>, <code>monthly</code>, <code>yearly</code>.

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronInterval~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClass~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>~~

| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The interval of a cron job. This attribute is dependant on the attribute sstCronRepeatType. Valid values are: <code>1</code> - <code>12</code>. For example: <code>2</code> could be every two days, weeks, months or years (depending on the value of the attribute <code>sstCronRepeatType</code>.

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronStartDate~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClass~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>~~

| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The first time a cron job is executed. This date is stored in the form of [YYYY][MM][DD] ([http://en.wikipedia.org/wiki/ISO_8601 ISO 8601]). For example: <code>2010314</code> (the 14th of March 2015).

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronDuration~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClass~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>~~

| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The duration of the monitoring window in minutes. Valid values are: <code>15</code> - <code>1440</code> (15 minutes to 24 hours). For example: <code>60</code>, which means 60 minutes (one hour).

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronMinute~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClass~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~

~~Valid values are: <code>0</code> - <code>59</code>. For example: <code>30</code>, which means 30 minutes past the hour.~~

~~If the attribute <code>sstCronMinuteEnd</code> is set, then <code>sstCronMinute</code> is interpreted as the start of a monitoring window minute range.~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronMinuteEnd~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClass~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~

| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The number of minutes past the hour that the monitoring window must end (minus the duration defined with attribute <code>sstCronDuration>/code>). Valid values are: <code>0</code> - <code>59</code>.

~~For example: <code>45</code>, which means 45 minutes past the hour.~~

~~If this attribute is set, it is interpreted as the end of a monitoring window minute range, while <code>sstCronMinute</code> is interpreted as the start of a monitoring window minute range.~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronHour~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClass~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The hour the monitoring window must start.~~

~~Valid values are: <code>0</code> - <code>23</code>. For example: <code>9</code>, which means 9 am, while <code>17</code> means 5 pm.~~

~~If the attribute <code>sstCronHourEnd</code> is set, then <code>sstCronMinute</code> is interpreted as the start of a monitoring window hour range.~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronHourEnd~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClass~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~

| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The hour the monitoring window must end (minus the duration defined with attribute <code>sstCronDuration>/code>).

~~Valid values are: <code>0</code> - <code>23</code>. For example: <code>9</code>, which means 9 am, while <code>17</code> means 5 pm.~~

~~If this attribute is set, it is interpreted as the end of a monitoring window hour range, while <code>sstCronHour</code> is interpreted as the start of a monitoring window hour range.~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronDayOfWeek~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClass~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~

| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Day of week (<code>0</code> - <code>6</code>), where Sunday is <code>0</code>. For example: <code>1</code>, which means Monday.

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronDayOfMonth~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClass~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~

| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The day of the month a cron job is to be executed. Valid values are: <code>1</code> - <code>31</code>. For example: <code>3</code> is the third of the month.

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronMonthOfyear~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClass~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~

| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The month of the year a cron job is to be executed. Valid values are: <code>1</code> - <code>12</code>. For example: <code>3</code> would be March.

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronOccurrenceInMonth~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClass~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~

| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The occurence of the day in a month a cron job is to be executed. Valid values are: <code>1</code> - <code>4</code>. For example: <code>3</code> would be the third occurence. If you use a value higher than 4, the calculation will fail in months, which only have 4 same days (for example February will never have 5 Mondays ...).

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstInformPersonUID~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>~~

| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the UID of the person to be informed if necessary. This UID can be used to look up the persons mail address, preferred language, name, surname or other information.

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstResponsiblePersonUID~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>~~

| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the UID of the person who is responsible for the system or service. This UID can be used to look up the persons mail address, preferred language, name, surname or other information.

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstResponsibleDeputyPersonUID~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~

| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the UID of the deputy of the person who is responsible for the system or service. This UID can be used to look up the persons mail address, preferred language, name, surname or other information.

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstNotificationWarning~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClass~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>~~

| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| This multi-valued attribute will be used to turn single notifications on or off. Currently, the only allowed value is <code>reminder</code>. The value (name) corresponds with the template dn.

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstIsMultiTenant~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClass~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>~~

| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| If this singe-valued attribute is set to TRUE, we know that this is a multi tenant capable system or service. For example stoney backup, stoney storage or stoney wiki). The monitoring notification system will therefore know, that it must inform the tenants differently.

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBelongsToServiceUID~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceObjectClass~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>~~

| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the UID of the service the leaf belongs to. This UID can be used to look up other information. A unique value with 7 digits or more. <code>4000123</code>.

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBelongsToResellerUID~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>~~

| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the reseller UID the leaf belongs to. A unique value with 7 digits or more. For example: <code>4000000</code>.

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBelongsToCustomerUID~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>~~

~~| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>~~

| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the customer UID the leaf belongs to. A unique value with 7 digits or more. For example: <code>4000001</code>.

~~Legend:~~

* '''x''': Mandatory in all cases.

[[Category: OpenLDAP directory]]

[[Category: stoney monitoring]]

Michael

SLB, editor, reviewer

3,368

edits