| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the reseller UID the leaf belongs to. A unique value with 7 digits or more. For example: <code>4000000</code>.
|}
Legend:
* '''x''': Mandatory in all cases.
==== Maintenance - Configuration - Reseller - Defaults ====
This sub tree stores the default settings for the stoney maintenance service for the reseller Reseller Ltd. with the uid 4000000.
The configuration below tells us the following:
* We have a maintenance window range (as <code>sstCronMinuteEnd</code> and <code>sstCronHourEnd</code> are set).
* The maintenance window is executed every 2nd Tuesday of every month.
* The maintenance windows can start a 09:30 and must end at 13:45 and takes 1 hour (60 minutes).
* A reminder will be sent to 'Support stepping stone AG <support@stepping-stone.ch>'.
The lookup of the default settings for the stoney maintenance service is as follows:
# '''OpenStack project:''' <code>ou=defaults,uid=4100000,ou=projects,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
# '''Customer:''' <code>ou=defaults,uid=4000001,ou=customers,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
# '''Reseller:''' <code>ou=defaults,uid=4000000,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
For example: If now default values or only a subset of default values can be found in the 'OpenStack project' sub tree, another lookup must be executed in the 'Customer' sub tree. If we still have missing default values, repeat the lookup in the 'Reseller' sub tree. If we still have missing values, these must be filled out by the user.
<source lang="ldif">
dn: ou=defaults,uid=4000000,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
objectclass: sstMaintenanceDefaultsObjectClass
objectclass: sstNotificationObjectClass
objectclass: sstRelationship
ou: defaults
description: This sub tree stores the default settings for the stoney maintenance service for the reseller Reseller Ltd. with the uid 4000000.
sstIsActive: TRUE # MUST: The default is always TRUE, otherwise why bother?
sstServicePriority: 3 # MAY: We always set this, in case sstServiceAutomated is set to FALSE (as a fall-back position)
sstServiceAutomated: TRUE # MAY: Depending on the reseller, we either have TRUE or FALSE. If sstServiceAutomated is not set, we presume FALSE
sstCronRepeatType: monthly # MAY: repeat type is monthly
sstCronInterval: 1 # MAY: repeat every month
sstCronOccurrenceInMonth: 2 # MAY: second occurence
sstCronDayOfWeek: 2 # MAY: Tuesday
sstCronMinute: 30 # MAY: 30 Minutes past the hour
sstCronMinuteEnd: 45 # MAY: 45 Minutes past the hour (new attribute, for if we have a range: 09:30 - 13:45)
sstCronHour: 9 # MAY: 9 am
sstCronHourEnd: 13 # MAY: 1 pm (new attribute, for if we have a range: 09:30 - 13:45)
sstCronDuration: 60 # MAY: 60 minutes (one hour)
sstNotificationWarning: reminder # MAY: We alway set this (Multi-valued attribute).
sstInformPersonUID: 1000482 # MAY: Support stepping stone AG (support@stepping-stone.ch)
sstResponsiblePersonUID: 1000482 # MAY: Support stepping stone AG (support@stepping-stone.ch)
sstResponsibleDeputyPersonUID: 1000482 # MAY: Support stepping stone AG (support@stepping-stone.ch)
sstBelongsToResellerUID: 4000000
sstBelongsToCustomerUID: 4000001
</source>
The following table describes the different attributes:
{| style="border-spacing:0;"
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| '''Attribute'''
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| '''Objectclass'''
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Existence'''</center>
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Mandatory'''</center>
| style="border:0.002cm solid #000000;padding:0.097cm;"| '''Description'''
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| description
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The description of the leaf.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstIsActive
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Is the entry active? Either <code>TRUE</code> (yes) or <code>FALSE</code> (no).
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstServicePriority
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The maintenance service level. The possible maintenance service levels (1, 2 or 3):
* <code>3</code>: Maintenance P3 [per Unit]: The Security Advisories will be installed once a month at the desired moment during the working hours (Monday to Friday from 09:00 - 12:00 and 13:00 - 17:00).
* <code>2</code>: Maintenance P2 [per Unit]: The Security Advisories will be installed once a month at the desired moment during the extended working hours (Monday to Friday from 07:00 - 12:00 and 13:00 - 19:00).
* <code>1</code>: Maintenance P1 [per Unit]: The Security Advisories will be installed once a month at the desired moment around the clock (Monday to Sunday from 00:00 - 24:00).
For more information on these maintenance service levels, visit stepping stone GmbH [http://www.stepping-stone.ch/infrastructure-as-a-service/maintenance/ web page].
If the attribute <code>sstServiceAutomated</code> is set to <code>TRUE</code>, the <code>sstServicePriority</code> will be ignored. And we will have automated maintenance windows in the form of:
* Maintenance Automated (vcs_gitlab) [per Unit]: The Security Advisories will be installed once a month at the desired moment around the clock (Monday to Sunday from 00:00 - 24:00).
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstServiceAutomated
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| A maintenance window is either executed automatically:
* <code>sstServiceAutomated: TRUE</code>
or manually:
* <code>sstServiceAutomated: FALSE</code>
If the attribute <code>sstServiceAutomated</code> does not exist, presume <code>FALSE</code>.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronRepeatType
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| How often is a cron job to be repeated. Valid values are: <code>daily</code>, <code>weekly</code>, <code>monthly</code>, <code>yearly</code>.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronInterval
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The interval of a cron job. This attribute is dependant on the attribute sstCronRepeatType. Valid values are: <code>1</code> - <code>12</code>. For example: <code>2</code> could be every two days, weeks, months or years (depending on the value of the attribute <code>sstCronRepeatType</code>.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronOccurrenceInMonth
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The occurence of the day in a month a cron job is to be executed. Valid values are: <code>1</code> - <code>4</code>. For example: <code>3</code> would be the third occurence. If you use a value higher than 4, the calculation will fail in months, which only have 4 same days (for example February will never have 5 Mondays ...).
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronDayOfWeek
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Day of week (<code>0</code> - <code>6</code>), where Sunday is <code>0</code>. For example: <code>1</code>, which means Monday.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronMinute
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The number of minutes past the hour that the maintenance window must start.
Valid values are: <code>0</code> - <code>59</code>. For example: <code>30</code>, which means 30 minutes past the hour.
If the attribute <code>sstCronMinuteEnd</code> is set, then <code>sstCronMinute</code> is interpreted as the start of a maintenance window minute range.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronMinuteEnd
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The number of minutes past the hour that the maintenance window must end (minus the duration defined with attribute <code>sstCronDuration>/code>). Valid values are: <code>0</code> - <code>59</code>.
For example: <code>45</code>, which means 45 minutes past the hour.
If this attribute is set, it is interpreted as the end of a maintenance window minute range, while <code>sstCronMinute</code> is interpreted as the start of a maintenance window minute range.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronHour
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The hour the maintenance window must start.
Valid values are: <code>0</code> - <code>23</code>. For example: <code>9</code>, which means 9 am, while <code>17</code> means 5 pm.
If the attribute <code>sstCronHourEnd</code> is set, then <code>sstCronMinute</code> is interpreted as the start of a maintenance window hour range.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronHourEnd
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The hour the maintenance window must end (minus the duration defined with attribute <code>sstCronDuration>/code>).
Valid values are: <code>0</code> - <code>23</code>. For example: <code>9</code>, which means 9 am, while <code>17</code> means 5 pm.
If this attribute is set, it is interpreted as the end of a maintenance window hour range, while <code>sstCronHour</code> is interpreted as the start of a maintenance window hour range.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronDuration
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The duration of the maintenance window in minutes. Valid values are: <code>15</code> - <code>1440</code> (15 minutes to 24 hours). For example: <code>60</code>, which means 60 minutes (one hour).
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstNotificationWarning
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstNotificationObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| This multi-valued attribute will be used to turn single notifications on or off. Currently, the only allowed value is <code>reminder</code>. The value (name) corresponds with the template dn.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstInformPersonUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the UID of the person to be informed if necessary. This UID can be used to look up the persons mail address, preferred language, name, surname or other information.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstResponsiblePersonUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the UID of the person who is responsible for the system or service. This UID can be used to look up the persons mail address, preferred language, name, surname or other information.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstResponsibleDeputyPersonUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the UID of the deputy of the person who is responsible for the system or service. This UID can be used to look up the persons mail address, preferred language, name, surname or other information.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBelongsToResellerUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the reseller UID the leaf belongs to. A unique integer value with 7 digits or more. In the case of OpenStack Domains (resellers), the value of <code>sstBelongsToResellerUID</code> corresponds with the value of <code>uid</code>.
For example: <code>sstBelongsToResellerUID: 4000000</code> corresponds with <code>uid: 4000000</code>.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBelongsToCustomerUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the customer UID the leaf belongs to. A unique value with 7 digits or more, must correspond with the uid entry. Each reseller is also a customer in the LDAP directory. Therefore, the value of the attribute <code>sstBelongsToCustomerUID</code> should always be set to the customer UID, that reflects the reseller for the OpenStack Domains.
For example: <code>sstBelongsToCustomerUID: 4000001</code>.
|}
{$surname} Eichenberger
{$inform} - Michael Eichenberger <michael.eichenberger@stepping-stone.ch>
{$responsible} - Christian Affolter Niklaus Hofer <christianniklaus.affolterhofer@stepping-stone.ch> {$deputy} - Tiziano Müller Yannick Denzer <tizianoyannick.müllserdenzer@stepping-stone.ch>
{$maintenance_date} 2016-08-17
{$maintenance_start} 16:00
Mit besten Grüssen,
Das Support-Team der stepping stone GmbHAG
--
stepping stone GmbHAGNeufeldstrasse 9Wasserwerkgasse 7CH-3012 3011 Bern
Telefon: +41 31 332 53 63
With best regards,
Your stepping stone GmbH AG support team
--
stepping stone GmbHAGNeufeldstrasse 9Wasserwerkgasse 7CH-3012 3011 Bern
Telefon: +41 31 332 53 63
Mit besten Grüssen,
Das Support-Team der stepping stone GmbHAG
--
stepping stone GmbHAGNeufeldstrasse 9Wasserwerkgasse 7CH-3012 3011 Bern
Telefon: +41 31 332 53 63
support@stepping-stone.ch
</pre>
==== Maintenance - Configuration - Reseller - Settings ====
This sub tree contains the default settings (currently only language and mail from) for the maintenance service for the reseller Reseller Ltd. with the uid 4000000:
<source lang="ldif">
dn: ou=settings,uid=4000000,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
objectclass: sstServiceSettingsObjectClass
ou: settings
description: This sub tree contains the default settings (currently ony language and mail from) for the maintenance service for the reseller Reseller Ltd. with the uid 4000000.
</source>
=== Maintenance - Configuration - Customers ===
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the customer UID the leaf belongs to. A unique value with 7 digits or more. For example: <code>4000001</code>.
|}
Legend:
* '''x''': Mandatory in all cases.
==== Maintenance - Configuration - Customers - Defaults ====
This sub tree stores the default settings for the stoney maintenance service for the customer Customer Ltd. with the uid 4000001.
The configuration below tells us the following:
* We have a maintenance window range (as <code>sstCronMinuteEnd</code> and <code>sstCronHourEnd</code> are set).
* The maintenance window is executed every 2nd Tuesday of every month.
* The maintenance windows can start a 09:30 and must end at 13:45 and takes 1 hour (60 minutes).
* A reminder will be sent to 'Support stepping stone AG <support@stepping-stone.ch>'.
The lookup of the default settings for the stoney maintenance service is as follows:
# '''OpenStack project:''' <code>ou=defaults,uid=4100000,ou=projects,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
# '''Customer:''' <code>ou=defaults,uid=4000001,ou=customers,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
# '''Reseller:''' <code>ou=defaults,uid=4000000,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
For example: If now default values or only a subset of default values can be found in the 'OpenStack project' sub tree, another lookup must be executed in the 'Customer' sub tree. If we still have missing default values, repeat the lookup in the 'Reseller' sub tree. If we still have missing values, these must be filled out by the user.
<source lang="ldif">
dn: ou=defaults,uid=4000001,ou=customers,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
objectclass: sstMaintenanceDefaultsObjectClass
objectclass: sstNotificationObjectClass
objectclass: sstRelationship
ou: defaults
description: This sub tree stores the default settings for the stoney maintenance service for the customer Customer Ltd. with the uid 4000001.
sstIsActive: TRUE # MUST: The default is always TRUE, otherwise why bother?
sstServicePriority: 3 # MAY: We always set this, in case sstServiceAutomated is set to FALSE (as a fall-back position)
sstServiceAutomated: TRUE # MAY: Depending on the reseller, we either have TRUE or FALSE. If sstServiceAutomated is not set, we presume FALSE
sstCronRepeatType: monthly # MAY: repeat type is monthly
sstCronInterval: 1 # MAY: repeat every month
sstCronOccurrenceInMonth: 2 # MAY: second occurence
sstCronDayOfWeek: 2 # MAY: Tuesday
sstCronMinute: 30 # MAY: 30 Minutes past the hour
sstCronMinuteEnd: 45 # MAY: 45 Minutes past the hour (new attribute, for if we have a range: 09:30 - 13:45)
sstCronHour: 9 # MAY: 9 am
sstCronHourEnd: 13 # MAY: 1 pm (new attribute, for if we have a range: 09:30 - 13:45)
sstCronDuration: 60 # MAY: 60 minutes (one hour)
sstNotificationWarning: reminder # MAY: We alway set this (Multi-valued attribute).
sstInformPersonUID: 1000482 # MAY: Support stepping stone AG (support@stepping-stone.ch)
sstResponsiblePersonUID: 1000482 # MAY: Support stepping stone AG (support@stepping-stone.ch)
sstResponsibleDeputyPersonUID: 1000482 # MAY: Support stepping stone AG (support@stepping-stone.ch)
sstBelongsToResellerUID: 4000000
sstBelongsToCustomerUID: 4000001
</source>
The following table describes the different attributes:
{| style="border-spacing:0;"
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| '''Attribute'''
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| '''Objectclass'''
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Existence'''</center>
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Mandatory'''</center>
| style="border:0.002cm solid #000000;padding:0.097cm;"| '''Description'''
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| description
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The description of the leaf.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstIsActive
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Is the entry active? Either <code>TRUE</code> (yes) or <code>FALSE</code> (no).
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstServicePriority
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The maintenance service level. The possible maintenance service levels (1, 2 or 3):
* <code>3</code>: Maintenance P3 [per Unit]: The Security Advisories will be installed once a month at the desired moment during the working hours (Monday to Friday from 09:00 - 12:00 and 13:00 - 17:00).
* <code>2</code>: Maintenance P2 [per Unit]: The Security Advisories will be installed once a month at the desired moment during the extended working hours (Monday to Friday from 07:00 - 12:00 and 13:00 - 19:00).
* <code>1</code>: Maintenance P1 [per Unit]: The Security Advisories will be installed once a month at the desired moment around the clock (Monday to Sunday from 00:00 - 24:00).
For more information on these maintenance service levels, visit stepping stone GmbH [http://www.stepping-stone.ch/infrastructure-as-a-service/maintenance/ web page].
If the attribute <code>sstServiceAutomated</code> is set to <code>TRUE</code>, the <code>sstServicePriority</code> will be ignored. And we will have automated maintenance windows in the form of:
* Maintenance Automated (vcs_gitlab) [per Unit]: The Security Advisories will be installed once a month at the desired moment around the clock (Monday to Sunday from 00:00 - 24:00).
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstServiceAutomated
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| A maintenance window is either executed automatically:
* <code>sstServiceAutomated: TRUE</code>
or manually:
* <code>sstServiceAutomated: FALSE</code>
If the attribute <code>sstServiceAutomated</code> does not exist, presume <code>FALSE</code>.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronRepeatType
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| How often is a cron job to be repeated. Valid values are: <code>daily</code>, <code>weekly</code>, <code>monthly</code>, <code>yearly</code>.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronInterval
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The interval of a cron job. This attribute is dependant on the attribute sstCronRepeatType. Valid values are: <code>1</code> - <code>12</code>. For example: <code>2</code> could be every two days, weeks, months or years (depending on the value of the attribute <code>sstCronRepeatType</code>.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronOccurrenceInMonth
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The occurence of the day in a month a cron job is to be executed. Valid values are: <code>1</code> - <code>4</code>. For example: <code>3</code> would be the third occurence. If you use a value higher than 4, the calculation will fail in months, which only have 4 same days (for example February will never have 5 Mondays ...).
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronDayOfWeek
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Day of week (<code>0</code> - <code>6</code>), where Sunday is <code>0</code>. For example: <code>1</code>, which means Monday.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronMinute
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The number of minutes past the hour that the maintenance window must start.
Valid values are: <code>0</code> - <code>59</code>. For example: <code>30</code>, which means 30 minutes past the hour.
If the attribute <code>sstCronMinuteEnd</code> is set, then <code>sstCronMinute</code> is interpreted as the start of a maintenance window minute range.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronMinuteEnd
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The number of minutes past the hour that the maintenance window must end (minus the duration defined with attribute <code>sstCronDuration>/code>). Valid values are: <code>0</code> - <code>59</code>.
For example: <code>45</code>, which means 45 minutes past the hour.
If this attribute is set, it is interpreted as the end of a maintenance window minute range, while <code>sstCronMinute</code> is interpreted as the start of a maintenance window minute range.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronHour
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The hour the maintenance window must start.
Valid values are: <code>0</code> - <code>23</code>. For example: <code>9</code>, which means 9 am, while <code>17</code> means 5 pm.
If the attribute <code>sstCronHourEnd</code> is set, then <code>sstCronMinute</code> is interpreted as the start of a maintenance window hour range.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronHourEnd
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The hour the maintenance window must end (minus the duration defined with attribute <code>sstCronDuration>/code>).
Valid values are: <code>0</code> - <code>23</code>. For example: <code>9</code>, which means 9 am, while <code>17</code> means 5 pm.
If this attribute is set, it is interpreted as the end of a maintenance window hour range, while <code>sstCronHour</code> is interpreted as the start of a maintenance window hour range.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronDuration
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The duration of the maintenance window in minutes. Valid values are: <code>15</code> - <code>1440</code> (15 minutes to 24 hours). For example: <code>60</code>, which means 60 minutes (one hour).
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstNotificationWarning
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstNotificationObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| This multi-valued attribute will be used to turn single notifications on or off. Currently, the only allowed value is <code>reminder</code>. The value (name) corresponds with the template dn.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstInformPersonUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the UID of the person to be informed if necessary. This UID can be used to look up the persons mail address, preferred language, name, surname or other information.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstResponsiblePersonUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the UID of the person who is responsible for the system or service. This UID can be used to look up the persons mail address, preferred language, name, surname or other information.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstResponsibleDeputyPersonUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the UID of the deputy of the person who is responsible for the system or service. This UID can be used to look up the persons mail address, preferred language, name, surname or other information.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBelongsToResellerUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the reseller UID the leaf belongs to. A unique integer value with 7 digits or more. In the case of OpenStack Domains (resellers), the value of <code>sstBelongsToResellerUID</code> corresponds with the value of <code>uid</code>.
For example: <code>sstBelongsToResellerUID: 4000000</code> corresponds with <code>uid: 4000000</code>.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBelongsToCustomerUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the customer UID the leaf belongs to. A unique value with 7 digits or more, must correspond with the uid entry. Each reseller is also a customer in the LDAP directory. Therefore, the value of the attribute <code>sstBelongsToCustomerUID</code> should always be set to the customer UID, that reflects the reseller for the OpenStack Domains.
For example: <code>sstBelongsToCustomerUID: 4000001</code>.
|}
description: This sub tree contains the templates for the maintenance service for the customer Customer Ltd. with the uid 4000001.
</source>
=== Maintenance - Configuration - OpenStack projects ===
The sub tree for the OpenStack projects specific maintenance service settings:
<source lang="ldif">
dn: ou=projects,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
ou: projects
description: The sub tree for the OpenStack projects specific maintenance service settings.
</source>
The sub tree for the specific maintenance service settings for the OpenStack project Customer Ltd. - Public Systems with the uid 4100001.
<source lang="ldif">
dn: uid=4100001,ou=projects,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: sstOpenStackProject
objectclass: sstRelationship
uid: 4100001
sstOpenStackId: 9ecb5bfdd4564f6ca52bba1e869eeea4
sstOpenStackName: Customer Ltd. - Public Systems
description: The sub tree for the specific maintenance service settings for the OpenStack project 'Customer Ltd. - Public Systems' with the uid 4100001.
sstIsActive: TRUE
sstBelongsToDomainID: b01822477be64c09950022486300c59c
sstBelongsToResellerUID: 4000000
sstBelongsToCustomerUID: 4000001
</source>
The following table describes the different attributes:
The following table describes the different attributes:
{| style="border-spacing:0;"
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| '''Attribute'''
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| '''Objectclass'''
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Existence'''</center>
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Mandatory'''</center>
| style="border:0.002cm solid #000000;padding:0.097cm;"| '''Description'''
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| uid
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstOpenStackProject
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| A unique integer value with 7 digits or more. In the case of OpenStack Domains (resellers), the value of <code>uid</code> corresponds with the value of <code>sstBelongsToResellerUID</code>.
For example: <code>uid: 4000000</code> corresponds with <code>sstBelongsToResellerUID: 4000000</code>.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstOpenStackId
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstOpenStackProject
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The OpenStack project id as returned from the OpenStack API.
For example: <code>"id" : "5a3a4fd5d6e94a87815131be42d8e6d9"</code>. This gives us the LDAP entry: <code>sstOpenStackId: 5a3a4fd5d6e94a87815131be42d8e6d9</code>.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstOpenStackName
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstOpenStackProject
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The OpenStack project name as returned from the OpenStack API.
For example: <code>"name" : "Customer Ltd. - Public Systems"</code>. This gives us the LDAP entry: <code>sstOpenStackName: Customer Ltd. - Public Systems</code>.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| description
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstOpenStackProject
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The description of the leaf.
For example: <code>The sub tree for the specific maintenance service settings for the OpenStack project 'Customer Ltd. - Public Systems' with the uid 4100001.</code>
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstIsActive
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstOpenStackProject
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Is the entry active? Either <code>TRUE</code> (yes) or <code>FALSE</code> (no).
The default value is <code>TRUE</code>.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBelongsToDomainID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstOpenStackProject
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MUST</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The OpenStack domain id the project belongs to.
For example: <code>sstBelongsToDomainID: b01822477be64c09950022486300c59c</code>.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBelongsToResellerUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the reseller UID the leaf belongs to. A unique integer value with 7 digits or more. In the case of OpenStack Domains (resellers), the value of <code>sstBelongsToResellerUID</code> corresponds with the value of <code>uid</code>.
For example: <code>sstBelongsToResellerUID: 4000000</code> corresponds with <code>uid: 4000000</code>.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBelongsToCustomerUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the customer UID the leaf belongs to. A unique value with 7 digits or more, must correspond with the uid entry. Each reseller is also a customer in the LDAP directory. Therefore, the value of the attribute <code>sstBelongsToCustomerUID</code> should always be set to the customer UID, that reflects the reseller for the OpenStack Domains.
For example: <code>sstBelongsToCustomerUID: 4000001</code>.
|}
Legend:
* '''x''': Mandatory in all cases.
==== Maintenance - Configuration - OpenStack projects - Defaults ====
This sub tree stores the default settings for the stoney maintenance service for the OpenStack project 'Customer Ltd. - Internal Systems' with OpenStack id '5a3a4fd5d6e94a87815131be42d8e6d9' and with the OpenStack project uid '4000001'.
The configuration below tells us the following:
* We have a maintenance window range (as <code>sstCronMinuteEnd</code> and <code>sstCronHourEnd</code> are set).
* The maintenance window is executed every 2nd Tuesday of every month.
* The maintenance windows can start a 09:30 and must end at 13:45 and takes 1 hour (60 minutes).
* A reminder will be sent to 'Support stepping stone AG <support@stepping-stone.ch>'.
The lookup of the default settings for the stoney maintenance service is as follows:
# '''OpenStack project:''' <code>ou=defaults,uid=4100000,ou=projects,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
# '''Customer:''' <code>ou=defaults,uid=4000001,ou=projects,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
# '''Reseller:''' <code>ou=defaults,uid=4000000,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org</code>.
For example: If now default values or only a subset of default values can be found in the 'OpenStack project' sub tree, another lookup must be executed in the 'Customer' sub tree. If we still have missing default values, repeat the lookup in the 'Reseller' sub tree. If we still have missing values, these must be filled out by the user.
<source lang="ldif">
dn: ou=defaults,uid=4000001,ou=projects,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
objectclass: sstMaintenanceDefaultsObjectClass
objectclass: sstNotificationObjectClass
objectclass: sstRelationship
ou: defaults
description: This sub tree stores the default settings for the stoney maintenance service for the OpenStack project 'Customer Ltd. - Internal Systems' with OpenStack id '5a3a4fd5d6e94a87815131be42d8e6d9' and with the OpenStack project uid '4000001'.
sstIsActive: TRUE # MAY: The default is always TRUE, otherwise why bother?
sstServicePriority: 3 # MAY: We always set this, in case sstServiceAutomated is set to FALSE (as a fall-back position)
sstServiceAutomated: TRUE # MAY: Depending on the reseller, we either have TRUE or FALSE. If sstServiceAutomated is not set, we presume FALSE
sstCronRepeatType: monthly # MAY: repeat type is monthly
sstCronInterval: 1 # MAY: repeat every month
sstCronOccurrenceInMonth: 2 # MAY: second occurence
sstCronDayOfWeek: 2 # MAY: Tuesday
sstCronMinute: 30 # MAY: 30 Minutes past the hour
sstCronMinuteEnd: 45 # MAY: 45 Minutes past the hour (new attribute, for if we have a range: 09:30 - 13:45)
sstCronHour: 9 # MAY: 9 am
sstCronHourEnd: 13 # MAY: 1 pm (new attribute, for if we have a range: 09:30 - 13:45)
sstCronDuration: 60 # MAY: 60 minutes (one hour)
sstNotificationWarning: reminder # MAY: We alway set this (Multi-valued attribute).
sstInformPersonUID: 1000482 # MAY: Support stepping stone AG (support@stepping-stone.ch)
sstResponsiblePersonUID: 1000482 # MAY: Support stepping stone AG (support@stepping-stone.ch)
sstResponsibleDeputyPersonUID: 1000482 # MAY: Support stepping stone AG (support@stepping-stone.ch)
sstBelongsToResellerUID: 4000000
sstBelongsToCustomerUID: 4000001
</source>
The following table describes the different attributes:
{| style="border-spacing:0;"
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| '''Attribute'''
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| '''Objectclass'''
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Existence'''</center>
| style="border-top:0.002cm solid #000000;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>'''Mandatory'''</center>
| style="border:0.002cm solid #000000;padding:0.097cm;"| '''Description'''
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| description
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The description of the leaf.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstIsActive
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Is the entry active? Either <code>TRUE</code> (yes) or <code>FALSE</code> (no).
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstServicePriority
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The maintenance service level. The possible maintenance service levels (1, 2 or 3):
* <code>3</code>: Maintenance P3 [per Unit]: The Security Advisories will be installed once a month at the desired moment during the working hours (Monday to Friday from 09:00 - 12:00 and 13:00 - 17:00).
* <code>2</code>: Maintenance P2 [per Unit]: The Security Advisories will be installed once a month at the desired moment during the extended working hours (Monday to Friday from 07:00 - 12:00 and 13:00 - 19:00).
* <code>1</code>: Maintenance P1 [per Unit]: The Security Advisories will be installed once a month at the desired moment around the clock (Monday to Sunday from 00:00 - 24:00).
For more information on these maintenance service levels, visit stepping stone GmbH [http://www.stepping-stone.ch/infrastructure-as-a-service/maintenance/ web page].
If the attribute <code>sstServiceAutomated</code> is set to <code>TRUE</code>, the <code>sstServicePriority</code> will be ignored. And we will have automated maintenance windows in the form of:
* Maintenance Automated (vcs_gitlab) [per Unit]: The Security Advisories will be installed once a month at the desired moment around the clock (Monday to Sunday from 00:00 - 24:00).
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstServiceAutomated
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| A maintenance window is either executed automatically:
* <code>sstServiceAutomated: TRUE</code>
or manually:
* <code>sstServiceAutomated: FALSE</code>
If the attribute <code>sstServiceAutomated</code> does not exist, presume <code>FALSE</code>.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronRepeatType
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| How often is a cron job to be repeated. Valid values are: <code>daily</code>, <code>weekly</code>, <code>monthly</code>, <code>yearly</code>.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronInterval
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The interval of a cron job. This attribute is dependant on the attribute sstCronRepeatType. Valid values are: <code>1</code> - <code>12</code>. For example: <code>2</code> could be every two days, weeks, months or years (depending on the value of the attribute <code>sstCronRepeatType</code>.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronOccurrenceInMonth
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The occurence of the day in a month a cron job is to be executed. Valid values are: <code>1</code> - <code>4</code>. For example: <code>3</code> would be the third occurence. If you use a value higher than 4, the calculation will fail in months, which only have 4 same days (for example February will never have 5 Mondays ...).
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronDayOfWeek
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Day of week (<code>0</code> - <code>6</code>), where Sunday is <code>0</code>. For example: <code>1</code>, which means Monday.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronMinute
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The number of minutes past the hour that the maintenance window must start.
Valid values are: <code>0</code> - <code>59</code>. For example: <code>30</code>, which means 30 minutes past the hour.
If the attribute <code>sstCronMinuteEnd</code> is set, then <code>sstCronMinute</code> is interpreted as the start of a maintenance window minute range.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronMinuteEnd
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The number of minutes past the hour that the maintenance window must end (minus the duration defined with attribute <code>sstCronDuration>/code>). Valid values are: <code>0</code> - <code>59</code>.
For example: <code>45</code>, which means 45 minutes past the hour.
If this attribute is set, it is interpreted as the end of a maintenance window minute range, while <code>sstCronMinute</code> is interpreted as the start of a maintenance window minute range.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronHour
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The hour the maintenance window must start.
Valid values are: <code>0</code> - <code>23</code>. For example: <code>9</code>, which means 9 am, while <code>17</code> means 5 pm.
If the attribute <code>sstCronHourEnd</code> is set, then <code>sstCronMinute</code> is interpreted as the start of a maintenance window hour range.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronHourEnd
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The hour the maintenance window must end (minus the duration defined with attribute <code>sstCronDuration>/code>).
Valid values are: <code>0</code> - <code>23</code>. For example: <code>9</code>, which means 9 am, while <code>17</code> means 5 pm.
If this attribute is set, it is interpreted as the end of a maintenance window hour range, while <code>sstCronHour</code> is interpreted as the start of a maintenance window hour range.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstCronDuration
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstMaintenanceDefaultsObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| The duration of the maintenance window in minutes. Valid values are: <code>15</code> - <code>1440</code> (15 minutes to 24 hours). For example: <code>60</code>, which means 60 minutes (one hour).
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstNotificationWarning
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstNotificationObjectClass
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| This multi-valued attribute will be used to turn single notifications on or off. Currently, the only allowed value is <code>reminder</code>. The value (name) corresponds with the template dn.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstInformPersonUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the UID of the person to be informed if necessary. This UID can be used to look up the persons mail address, preferred language, name, surname or other information.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstResponsiblePersonUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the UID of the person who is responsible for the system or service. This UID can be used to look up the persons mail address, preferred language, name, surname or other information.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstResponsibleDeputyPersonUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center></center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the UID of the deputy of the person who is responsible for the system or service. This UID can be used to look up the persons mail address, preferred language, name, surname or other information.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBelongsToResellerUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the reseller UID the leaf belongs to. A unique integer value with 7 digits or more. In the case of OpenStack Domains (resellers), the value of <code>sstBelongsToResellerUID</code> corresponds with the value of <code>uid</code>.
For example: <code>sstBelongsToResellerUID: 4000000</code> corresponds with <code>uid: 4000000</code>.
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBelongsToCustomerUID
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Stores the customer UID the leaf belongs to. A unique value with 7 digits or more, must correspond with the uid entry. Each reseller is also a customer in the LDAP directory. Therefore, the value of the attribute <code>sstBelongsToCustomerUID</code> should always be set to the customer UID, that reflects the reseller for the OpenStack Domains.
For example: <code>sstBelongsToCustomerUID: 4000001</code>.
|}
Legend:
* '''x''': Mandatory in all cases.
== Maintenance - Units ==
description: The maintenance leaf for the virtual machine with the uid 1234567.
sstIsActive: TRUE
sstBillable: TRUE
sstServicePriority: 3
sstServiceAutomated: TRUE
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| Is the entry active? Either <code>TRUE</code> (yes) or <code>FALSE</code> (no).
|-
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstBillable
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| sstRelationship
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>MAY</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:none;padding:0.097cm;"| <center>x</center>
| style="border-top:none;border-bottom:0.002cm solid #000000;border-left:0.002cm solid #000000;border-right:0.002cm solid #000000;padding:0.097cm;"| It the entry billable? Either <code>TRUE</code> (yes) or <code>FALSE</code> (no). All hierarchical levels must have <code>sstBillable: TRUE</code> to actually have an invoice generated and sent. If the attribute <code>sstBillable</code> doesn't exist, the default is <code>TRUE</code>. This way, we are forced to set a reseller, customer or product manually to <code>sstBillable: FALSE</code> if we want to avoid sending them an invoice.
|-