A checked version of this page, approved on 5 May 2022, was based off this revision.

It was rated: Version: v0.9

Abstract

This document describes the OpenLDAP directory data organisation for the stoney maintenance service.

Data Organisation

The following chapters explain the data organisation of the stoney cloud OpenLDAP directory, in this case we looking at the stoney maintenance service.

Maintenance

The following LDIF shows the maintenance entry of the whole OpenLDAP directory tree for the stoney cloud:

dn: ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
ou: maintenance
description: The sub tree for the maintenance (configuration management) service.

Maintenance - Configuration

The sub tree for the configuration of the maintenance service:

dn: ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
ou: configuration
description: The sub tree for the configuration of the maintenance service.

Maintenance - Configuration - Reseller

The sub tree for the reseller specific maintenance service settings:

dn: ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
ou: reseller
description: The sub tree for the reseller specific maintenance service settings.

The sub tree for the specific maintenance service settings for the reseller Reseller Ltd. with the uid 4000000.

dn: uid=4000000,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: sstReseller
objectclass: sstServiceConfigurationObjectClass
uid: 4000000
o: Reseller Ltd.
description: The sub tree for the specific maintenance service settings for the reseller Reseller Ltd. with the uid 4000000.
sstIsCompany: TRUE
sstIsActive: TRUE
sstIsDefault: TRUE
sstBelongsToResellerUID: 4000000

The following table describes the different attributes:

Attribute	Existence	Mandatory	Self-Service	Changeable	Description
uid	MUST	x			A unique integer value with 7 digits or more. For example: `4000000`.
o	MUST	x			The company name, for example: `Reseller Ltd.`.
description	MAY	x			The description of the leaf.
sstIsCompany	MUST	x			Is the entry a company? Either true (yes) or false (no).
sstIsActive	MUST	x			Is the entry active? Either `TRUE` (yes) or `FALSE` (no).
sstIsDefault	MAY				Contains the leaf a default entry? Either `TRUE` (yes) or `FALSE` (no). If `sstIsDefault` is set to `TRUE`, this entry acts as a fall back configuration. In other words: If a reseller doesn't have his own maintenance service configuration, then this on will be used.
sstBelongsToResellerUID	MUST	x			Stores the reseller UID the leaf belongs to. A unique value with 7 digits or more. For example: `4000000`.

Legend:

x: Mandatory in all cases.

Maintenance - Configuration - Reseller - Defaults

This sub tree stores the default settings for the stoney maintenance service for the reseller Reseller Ltd. with the uid 4000000.

The configuration below tells us the following:

We have a maintenance window range (as sstCronMinuteEnd and sstCronHourEnd are set).
The maintenance window is executed every 2nd Tuesday of every month.
The maintenance windows can start a 09:30 and must end at 13:45 and takes 1 hour (60 minutes).
A reminder will be sent to 'Support stepping stone AG <support@stepping-stone.ch>'.

The lookup of the default settings for the stoney maintenance service is as follows:

Service roles: ou=defaults,ou=stoney_office,ou=roles,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org.
OpenStack project: ou=defaults,uid=4100000,ou=projects,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org.
Customer: ou=defaults,uid=4000001,ou=customers,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org.
Reseller: ou=defaults,uid=4000000,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org.

For example: If no maintenance values or only a subset of maintenance values are set by the provisioning api (or provisioning script), an missing values are first looked up in the service roles sub tree. If there are still missing values, the next lookup occurs in the OpenStack project subtree. Once again, if there are still missing values, the next lookup occurs in the customer sub tree. If there are still missing values, the final lookup occurs in the reseller sub tree. If there are still missing values, the provisioning api (or provisioning script) must inform the calling instance (this would normally be a human).

dn: ou=defaults,uid=4000000,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
objectclass: sstMaintenanceDefaultsObjectClass
objectclass: sstNotificationObjectClass
objectclass: sstRelationship
ou: defaults
description: This sub tree stores the default settings for the stoney maintenance service for the reseller Reseller Ltd. with the uid 4000000.
sstIsActive: TRUE                       # MUST: The default is always TRUE, otherwise why bother? 
sstServicePriority: 3                   # MAY: We always set this, in case sstServiceAutomated is set to FALSE (as a fall-back position)
sstServiceAutomated: TRUE               # MAY: Depending on the reseller, we either have TRUE or FALSE. If sstServiceAutomated is not set, we presume FALSE
sstCronRepeatType: monthly              # MAY: repeat type is monthly
sstCronInterval: 1                      # MAY: repeat every month
sstCronOccurrenceInMonth: 2             # MAY: second occurence
sstCronDayOfWeek: 2                     # MAY: Tuesday
sstCronMinute: 30                       # MAY: 30 Minutes past the hour
sstCronMinuteEnd: 45                    # MAY: 45 Minutes past the hour (new attribute, for if we have a range: 09:30 - 13:45)
sstCronHour: 9                          # MAY: 9 am
sstCronHourEnd: 13                      # MAY: 1 pm (new attribute, for if we have a range: 09:30 - 13:45)  
sstCronDuration: 60                     # MAY: 60 minutes (one hour)
sstNotificationWarning: reminder        # MAY: We alway set this (Multi-valued attribute).
sstInformPersonUID: 1000482             # MAY: Support stepping stone AG (support@stepping-stone.ch)
sstResponsiblePersonUID: 1000482        # MAY: Support stepping stone AG (support@stepping-stone.ch)
sstResponsibleDeputyPersonUID: 1000482  # MAY: Support stepping stone AG (support@stepping-stone.ch)
sstBelongsToResellerUID: 4000000
sstBelongsToCustomerUID: 4000001

The following table describes the different attributes:

Attribute	Objectclass	Existence	Mandatory	Description
description	sstMaintenanceDefaultsObjectClass	MAY	x	The description of the leaf.
sstIsActive	sstMaintenanceDefaultsObjectClass	MAY	x	Is the entry active? Either `TRUE` (yes) or `FALSE` (no).
sstServicePriority	sstMaintenanceDefaultsObjectClass	MAY	x	The maintenance service level. The possible maintenance service levels (1, 2 or 3): `3`: Maintenance P3 [per Unit]: The Security Advisories will be installed once a month at the desired moment during the working hours (Monday to Friday from 09:00 - 12:00 and 13:00 - 17:00). `2`: Maintenance P2 [per Unit]: The Security Advisories will be installed once a month at the desired moment during the extended working hours (Monday to Friday from 07:00 - 12:00 and 13:00 - 19:00). `1`: Maintenance P1 [per Unit]: The Security Advisories will be installed once a month at the desired moment around the clock (Monday to Sunday from 00:00 - 24:00). For more information on these maintenance service levels, visit stepping stone GmbH web page. If the attribute `sstServiceAutomated` is set to `TRUE`, the `sstServicePriority` will be ignored. And we will have automated maintenance windows in the form of: Maintenance Automated (vcs_gitlab) [per Unit]: The Security Advisories will be installed once a month at the desired moment around the clock (Monday to Sunday from 00:00 - 24:00).
sstServiceAutomated	sstMaintenanceDefaultsObjectClass	MAY		A maintenance window is either executed automatically: `sstServiceAutomated: TRUE` or manually: `sstServiceAutomated: FALSE` If the attribute `sstServiceAutomated` does not exist, presume `FALSE`.
sstCronRepeatType	sstMaintenanceDefaultsObjectClass	MAY		How often is a cron job to be repeated. Valid values are: `daily`, `weekly`, `monthly`, `yearly`.
sstCronInterval	sstMaintenanceDefaultsObjectClass	MAY		The interval of a cron job. This attribute is dependant on the attribute sstCronRepeatType. Valid values are: `1` - `12`. For example: `2` could be every two days, weeks, months or years (depending on the value of the attribute `sstCronRepeatType`.
sstCronOccurrenceInMonth	sstMaintenanceDefaultsObjectClass	MAY		The occurence of the day in a month a cron job is to be executed. Valid values are: `1` - `4`. For example: `3` would be the third occurence. If you use a value higher than 4, the calculation will fail in months, which only have 4 same days (for example February will never have 5 Mondays ...).
sstCronDayOfWeek	sstMaintenanceDefaultsObjectClass	MAY		Day of week (`0` - `6`), where Sunday is `0`. For example: `1`, which means Monday.
sstCronMinute	sstMaintenanceDefaultsObjectClass	MAY		The number of minutes past the hour that the maintenance window must start. Valid values are: `0` - `59`. For example: `30`, which means 30 minutes past the hour. If the attribute `sstCronMinuteEnd` is set, then `sstCronMinute` is interpreted as the start of a maintenance window minute range.
sstCronMinuteEnd	sstMaintenanceDefaultsObjectClass	MAY		The number of minutes past the hour that the maintenance window must end (minus the duration defined with attribute `sstCronDuration>/code>). Valid values are: <code>0` - `59`. For example: `45`, which means 45 minutes past the hour. If this attribute is set, it is interpreted as the end of a maintenance window minute range, while `sstCronMinute` is interpreted as the start of a maintenance window minute range.
sstCronHour	sstMaintenanceDefaultsObjectClass	MAY		The hour the maintenance window must start. Valid values are: `0` - `23`. For example: `9`, which means 9 am, while `17` means 5 pm. If the attribute `sstCronHourEnd` is set, then `sstCronMinute` is interpreted as the start of a maintenance window hour range.
sstCronHourEnd	sstMaintenanceDefaultsObjectClass	MAY		The hour the maintenance window must end (minus the duration defined with attribute `sstCronDuration>/code>). Valid values are: <code>0` - `23`. For example: `9`, which means 9 am, while `17` means 5 pm. If this attribute is set, it is interpreted as the end of a maintenance window hour range, while `sstCronHour` is interpreted as the start of a maintenance window hour range.
sstCronDuration	sstMaintenanceDefaultsObjectClass	MAY		The duration of the maintenance window in minutes. Valid values are: `15` - `1440` (15 minutes to 24 hours). For example: `60`, which means 60 minutes (one hour).
sstNotificationWarning	sstNotificationObjectClass	MAY		This multi-valued attribute will be used to turn single notifications on or off. Currently, the only allowed value is `reminder`. The value (name) corresponds with the template dn.
sstInformPersonUID	sstRelationship	MAY		Stores the UID of the person to be informed if necessary. This UID can be used to look up the persons mail address, preferred language, name, surname or other information. As this attribute is multi-valued, the lookups will continue, even if this attribute is set.
sstResponsiblePersonUID	sstRelationship	MAY		Stores the UID of the person who is responsible for the system or service. This UID can be used to look up the persons mail address, preferred language, name, surname or other information.
sstResponsibleDeputyPersonUID	sstRelationship	MAY		Stores the UID of the deputy of the person who is responsible for the system or service. This UID can be used to look up the persons mail address, preferred language, name, surname or other information.
sstBelongsToResellerUID	sstRelationship	MAY	x	Stores the reseller UID the leaf belongs to. A unique integer value with 7 digits or more. In the case of OpenStack Domains (resellers), the value of `sstBelongsToResellerUID` corresponds with the value of `uid`. For example: `sstBelongsToResellerUID: 4000000` corresponds with `uid: 4000000`.
sstBelongsToCustomerUID	sstRelationship	MAY	x	Stores the customer UID the leaf belongs to. A unique value with 7 digits or more, must correspond with the uid entry. Each reseller is also a customer in the LDAP directory. Therefore, the value of the attribute `sstBelongsToCustomerUID` should always be set to the customer UID, that reflects the reseller for the OpenStack Domains. For example: `sstBelongsToCustomerUID: 4000001`.

Legend:

x: Mandatory in all cases.

Maintenance - Configuration - Reseller - Notification settings

The sub tree stores the notification information for the maintenance service for the reseller Reseller Ltd. with the uid 4000000. This information is used as a fallback. The lookup is as follows:

Unit: uid=4000003,ou=units,ou=maintenance,ou=services,dc=stoney-cloud,dc=org.
Customer: ou=notifications,uid=4000001,ou=customers,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org.
Reseller: ou=notifications,uid=4000000,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org.
Default Reseller: ou=notifications,uid=4000000,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org.

The idea is, that even if somebody forgot to define something, no maintenance window will be lost or forgotten.

dn: ou=notifications,uid=4000000,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
objectclass: sstNotificationObjectClass
ou: notifications
description: The sub tree stores the notification information for the maintenance service for the reseller Reseller Ltd. with the uid 4000000.
sstInformPersonUID: 4000002
sstResponsiblePersonUID: 4000002
sstResponsibleDeputyPersonUID: 4000002
sstNotificationWarning: reminder

The following table describes the different attributes:

Attribute	Existence	Mandatory	Self-Service	Changeable	Description
ou	MUST	x			The name of this leaf.
description	MAY	x			The description of the leaf.
sstInformPersonUID	MAY	x			Stores the persons UID the notification will be sent to. For example: `4000002`. This means the information of the person is stored under the dn: `uid=4000002,ou=people,dc=stoney-cloud,dc=org`.
sstResponsiblePersonUID	MAY	x			Stores the persons UID, who is responsible for the maintenance. The notification will be sent to this person. For example: `4000002`. This means the information of the person is stored under the dn: `uid=4000002,ou=people,dc=stoney-cloud,dc=org`.
sstResponsibleDeputyPersonUID	MAY	x			Stores the UID of the deputy of the person who is responsible for the maintenance. The notification will be sent to this person. For example: `4000002`. This means the information of the person is stored under the dn: `uid=4000002,ou=people,dc=stoney-cloud,dc=org`.
sstNotificationWarning	MAY	x			This multi-valued attribute will be used to turn single notifications on or off. Currently, the only allowed value is `reminder`. The value (name) corresponds with the template dn. For example: `ou=reminder,ou=templates,uid=4000000,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org`.

Legend:

x: Mandatory in all cases.

Maintenance - Configuration - Reseller - Templates

This sub tree contains the notification templates for the maintenance service for the reseller Reseller Ltd. with the uid 4000000:

dn: ou=templates,uid=4000000,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
ou: templates
description: This sub tree contains the templates for the maintenance service for the reseller Reseller Ltd. with the uid 4000000.

Maintenance - Configuration - Reseller - Reminder mail templates

This sub tree contains the reminder templates for the stoney maintenance service for the reseller Reseller Ltd. with the uid 4000000:

dn: ou=reminder,ou=templates,uid=4000000,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
objectclass: sstTemplateSetup
ou: reminder
description: This sub tree contains the reminder templates for the stoney maintenance service for the reseller Reseller Ltd. with the uid 4000000.
sstMailFrom: Support stepping stone GmbH <support@stoney-cloud.org>
sstMailTemplate: file:///var/www/selfcare/htdocs/themes/selfcare.stoney-cloud.org/templates/services/maintenance/reminder/reminder_mail
sstMailTemplateFormatSource: txt
sstMailTemplateFormatTarget: txt
sstMailTemplateReseller: file:///var/www/selfcare/htdocs/themes/selfcare.stoney-cloud.org/templates/services/maintenance/reminder/reminder_mail_reseller
sstMailTemplateResellerFormatSource: txt
sstMailTemplateResellerFormatTarget: txt

The following table describes the different attributes:

Attribute	Existence	Mandatory	Self-Service	Changeable	Description
ou	MUST	x
description	MUST	x
sstMailFrom	MAY	x			The mail address, from which the maintenance reminder mails are sent from. For example: `Support stepping stone GmbH <support@stoney-cloud.org>`.
sstMailTo	MAY				If this multi-valued attribute is set with one or mail address(es), then these recipients will receive the same information as the owner. Normally, this attribute is not set.
sstMailTemplate	MAY	x			The template, that is used to create the mail that is sent to the owner of the service if `sstBackupWarningOn: TRUE` and `sstNotificationWarningMedium: mail`. If the `mail` is not set, you must look for the `mail` in the owners person entry under `uid=<UID>,ou=people,dc=stoney-cloud,dc=org`. For example: `sstTemplate: file:///var/www/selfcare/htdocs/themes/selfcare.stoney-cloud.org/templates/services/maintenance/reminder/reminder_mail`.
sstMailTemplateFormatSource	MAY	x			The format of the source template. Supported values: `txt` `html` Place holder: For both `txt` or `html` as a source and `txt` or `html`, the place holders have the form of `{$placeholder}`. Default would normally be `txt`.
sstMailTemplateFormatTarget	MAY	x			The format of the target. Supported values: `txt` `html`
sstMailTemplateReseller	MAY	x¹			The path and name to a template file, that is used to inform one or more people if the multi-valued attribute `sstMailTo` is set in the notifications sub tree of the reseller `ou=notifications,uid=<UID>,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=foss-cloud,dc=org` and if <code>sstNotificationWarning is set to `maintenance`. In most cased, the attribute `sstMailTo` is set to the support organisation's mail address. For example: `sstMailTo: Support stepping stone GmbH <support@stepping-stone.ch>` This way, the support organisation will be pre-informed for when the customer should call or write. The information the recipients will receive, is the same as the owner, but will formatted according to: `sstTemplate: file:///var/www/selfcare/htdocs/themes/selfcare.stoney-cloud.org/templates/services/maintenance/reminder/reminder_mail` `sstMailTemplateResellerFormatSource: txt` `sstMailTemplateResellerFormatTarget: txt`
sstMailTemplateResellerFormatSource	MAY	x¹			The format of the source template. Supported values: `txt` `html` Place holder: For both `txt` or `html` as a source and `txt` or `html`, the place holders have the form of `{$placeholder}`. The complete path and file name is a string concatenation of the values of the attributes `sstTemplate`, `preferredLanguage` and `sstTemplateFormatSource` (with a dot in between the values). For example: `sstTemplate: file:///var/www/selfcare/htdocs/themes/selfcare.stoney-cloud.org/templates/services/maintenance/reminder/reminder_mail_reseller` `preferredLanguage: en-GB` `sstTemplateFormatSource: txt` This gives us: `file:///var/www/selfcare/htdocs/themes/selfcare.stoney-cloud.org/templates/services/maintenance/reminder/reminder_mail_reseller.en-GB.txt` Default would normally be `txt`.
sstMailTemplateResellerFormatTarget	MAY	x¹			The format of the target. Supported values: `txt` `html` Default would normallb be `txt`.

Legend:

x: Mandatory in all cases.
x¹: Must exist, if sstMailTo is set.

TODO: this is a copy and still needs checking / customizing.

Maintenance - Configuration - Reseller - Reminder mail templates: placeholders (txt/html)

An example:

{$system}            kvm-0003: stepping stone GmbH: Gentoo (stoney backup Server)
{$salutation}        Dear Mr.
{$surname}           Eichenberger
{$inform}            - Michael Eichenberger <michael.eichenberger@stepping-stone.ch>
{$responsible}       - Niklaus Hofer <niklaus.hofer@stepping-stone.ch>
{$deputy}            - Yannick Denzer <yannick.denzer@stepping-stone.ch>
{$maintenance_date}  2016-08-17
{$maintenance_start} 16:00
{$maintenance_end}   17:00

Optional Values:

none

Maintenance - Configuration - Reseller - Reminder mail templates: reminder_mail.de-CH.txt

Subject: Wartungsarbeiten am {$system}
{$salutation} {$surname}

Am {$maintenance_date} zwischen {$maintenance_start} und {$maintenance_end} finden 
die monatlichen Wartungsarbeiten auf Ihrem Server {$system} statt.

Dabei werden diverse Sicherheitsrisiken behoben.

Während den Wartungsarbeiten kann es zu kurzen Unterbrüchen der Services kommen.

Nach Abschluss der Wartungsarbeiten werden wir Sie nochmals benachrichtigen.

Diese Information geht an:
{$inform}
Falls Sie dieses Wartungsfenster nicht durchführen wollen, bitten wir Sie uns 
telefonisch darüber zu informieren.

Für Fragen stehen wir Ihnen gerne zur Verfügung.


Mit besten Grüssen,

Das Support-Team der stepping stone AG

--
stepping stone AG
Wasserwerkgasse 7
CH-3011 Bern

Telefon: +41 31 332 53 63
www.stepping-stone.ch
support@stepping-stone.ch

Maintenance - Configuration - Reseller - Reminder mail templates: reminder_mail.en-GB.txt

Subject: Maintenance Work for {$system}
{$salutation} {$surname}

The monthly maintenance window for {$system} will be held on the {$maintenance_date} 
between {$maintenance_start} and {$maintenance_end}.

Several security risks will be removed.

Short interruptions of the services can occur during the maintenance window.

We will inform you after the successful completion of the maintenance work.

This information goes to:
{$inform}
If you do not wish to perform this maintenance window, please let us know by 
telephone.

If you have any questions do not hesitate to contact us.


With best regards,

Your stepping stone AG support team

--
stepping stone AG
Wasserwerkgasse 7
CH-3011 Bern

Telefon: +41 31 332 53 63
www.stepping-stone.ch
support@stepping-stone.ch

Maintenance - Configuration - Reseller - Reminder mail templates: reminder_mail_reseller.de-CH.txt

Subject: Wartungsarbeiten am {$system}
{$salutation} {$surname}

Am {$maintenance_date} zwischen {$maintenance_start} und {$maintenance_end} finden 
die monatlichen Wartungsarbeiten auf Ihrem Server {$system} statt.

Verantwortlich für dieses System:
{$responsible}
Stellvertretung:
{$deputy}
Nach Abschluss der Wartungsarbeiten, bitte folgende Persone(n) informieren:
{$inform}

Mit besten Grüssen,

Das Support-Team der stepping stone AG

--
stepping stone AG
Wasserwerkgasse 7
CH-3011 Bern

Telefon: +41 31 332 53 63
www.stepping-stone.ch
support@stepping-stone.ch

Maintenance - Configuration - Reseller - Reminder mail templates: reminder_mail_reseller.en-GB.txt

Subject: Maintenance Work for {$system}
{$salutation} {$surname}

The monthly maintenance window for {$system} will be held on the {$maintenance_date} 
between {$maintenance_start} and {$maintenance_end}.

Responsible for this system:
{$responsible}
Deputy:
{$deputy}
After the successful completion of the maintenance work, please inform the following 
person/people:
{$inform}

With best regards,

Your stepping stone AG support team
--
stepping stone AG
Wasserwerkgasse 7
CH-3011 Bern

Telefon: +41 31 332 53 63
www.stepping-stone.ch
support@stepping-stone.ch

Maintenance - Configuration - Customers

The sub tree for the customers specific maintenance service settings:

dn: ou=customers,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
ou: customer
description: The sub tree for the customer specific maintenance service settings.

The sub tree for the specific maintenance service settings for the customer Customer Ltd. with the uid 4000001.

dn: uid=4000001,ou=customers,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: sstCustomer
objectclass: sstRelationship
objectclass: sstServiceConfigurationObjectClass
uid: 4000001
o: Customer Ltd.
description: The sub tree for the specific maintenance service settings for the customer Customer Ltd. with the uid 4000001.
sstIsCompany: TRUE
sstIsActive: TRUE
sstBelongsToResellerUID: 4000000
sstBelongsToCustomerUID: 4000001

The following table describes the different attributes:

Attribute	Existence	Mandatory	Self-Service	Changeable	Description
uid	MUST	x			A unique integer value with 7 digits or more. For example: `4000001`.
o	MUST	x			The company name, for example: `Customer Ltd.`.
description	MAY	x			The description of the leaf.
sstIsCompany	MUST	x			Is the entry a company? Either true (yes) or false (no).
sstIsActive	MUST	x			Is the entry active? Either `TRUE` (yes) or `FALSE` (no).
sstBelongsToResellerUID	MUST	x			Stores the reseller UID the leaf belongs to. A unique value with 7 digits or more. For example: `4000000`.
sstBelongsToResellerUID	MAY	x			Stores the customer UID the leaf belongs to. A unique value with 7 digits or more. For example: `4000001`.

Legend:

x: Mandatory in all cases.

Maintenance - Configuration - Customers - Defaults

This sub tree stores the default settings for the stoney maintenance service for the customer Customer Ltd. with the uid 4000001.

The configuration below tells us the following:

We have a maintenance window range (as sstCronMinuteEnd and sstCronHourEnd are set).
The maintenance window is executed every 2nd Tuesday of every month.
The maintenance windows can start a 09:30 and must end at 13:45 and takes 1 hour (60 minutes).
A reminder will be sent to 'Support stepping stone AG <support@stepping-stone.ch>'.

The lookup of the default settings for the stoney maintenance service is as follows:

Service roles: ou=defaults,ou=stoney_office,ou=roles,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org.
OpenStack project: ou=defaults,uid=4100000,ou=projects,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org.
Customer: ou=defaults,uid=4000001,ou=customers,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org.
Reseller: ou=defaults,uid=4000000,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org.

dn: ou=defaults,uid=4000001,ou=customers,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
objectclass: sstMaintenanceDefaultsObjectClass
objectclass: sstNotificationObjectClass
objectclass: sstRelationship
ou: defaults
description: This sub tree stores the default settings for the stoney maintenance service for the customer Customer Ltd. with the uid 4000001.
sstIsActive: TRUE                       # MUST: The default is always TRUE, otherwise why bother? 
sstServicePriority: 3                   # MAY: We always set this, in case sstServiceAutomated is set to FALSE (as a fall-back position)
sstServiceAutomated: TRUE               # MAY: Depending on the reseller, we either have TRUE or FALSE. If sstServiceAutomated is not set, we presume FALSE
sstCronRepeatType: monthly              # MAY: repeat type is monthly
sstCronInterval: 1                      # MAY: repeat every month
sstCronOccurrenceInMonth: 2             # MAY: second occurence
sstCronDayOfWeek: 2                     # MAY: Tuesday
sstCronMinute: 30                       # MAY: 30 Minutes past the hour
sstCronMinuteEnd: 45                    # MAY: 45 Minutes past the hour (new attribute, for if we have a range: 09:30 - 13:45)
sstCronHour: 9                          # MAY: 9 am
sstCronHourEnd: 13                      # MAY: 1 pm (new attribute, for if we have a range: 09:30 - 13:45)  
sstCronDuration: 60                     # MAY: 60 minutes (one hour)
sstNotificationWarning: reminder        # MAY: We alway set this (Multi-valued attribute).
sstInformPersonUID: 1000482             # MAY: Support stepping stone AG (support@stepping-stone.ch)
sstResponsiblePersonUID: 1000482        # MAY: Support stepping stone AG (support@stepping-stone.ch)
sstResponsibleDeputyPersonUID: 1000482  # MAY: Support stepping stone AG (support@stepping-stone.ch)
sstBelongsToResellerUID: 4000000
sstBelongsToCustomerUID: 4000001

The following table describes the different attributes:

Attribute	Objectclass	Existence	Mandatory	Description
description	sstMaintenanceDefaultsObjectClass	MAY	x	The description of the leaf.
sstIsActive	sstMaintenanceDefaultsObjectClass	MAY	x	Is the entry active? Either `TRUE` (yes) or `FALSE` (no).
sstServicePriority	sstMaintenanceDefaultsObjectClass	MAY	x	The maintenance service level. The possible maintenance service levels (1, 2 or 3): `3`: Maintenance P3 [per Unit]: The Security Advisories will be installed once a month at the desired moment during the working hours (Monday to Friday from 09:00 - 12:00 and 13:00 - 17:00). `2`: Maintenance P2 [per Unit]: The Security Advisories will be installed once a month at the desired moment during the extended working hours (Monday to Friday from 07:00 - 12:00 and 13:00 - 19:00). `1`: Maintenance P1 [per Unit]: The Security Advisories will be installed once a month at the desired moment around the clock (Monday to Sunday from 00:00 - 24:00). For more information on these maintenance service levels, visit stepping stone GmbH web page. If the attribute `sstServiceAutomated` is set to `TRUE`, the `sstServicePriority` will be ignored. And we will have automated maintenance windows in the form of: Maintenance Automated (vcs_gitlab) [per Unit]: The Security Advisories will be installed once a month at the desired moment around the clock (Monday to Sunday from 00:00 - 24:00).
sstServiceAutomated	sstMaintenanceDefaultsObjectClass	MAY		A maintenance window is either executed automatically: `sstServiceAutomated: TRUE` or manually: `sstServiceAutomated: FALSE` If the attribute `sstServiceAutomated` does not exist, presume `FALSE`.
sstCronRepeatType	sstMaintenanceDefaultsObjectClass	MAY		How often is a cron job to be repeated. Valid values are: `daily`, `weekly`, `monthly`, `yearly`.
sstCronInterval	sstMaintenanceDefaultsObjectClass	MAY		The interval of a cron job. This attribute is dependant on the attribute sstCronRepeatType. Valid values are: `1` - `12`. For example: `2` could be every two days, weeks, months or years (depending on the value of the attribute `sstCronRepeatType`.
sstCronOccurrenceInMonth	sstMaintenanceDefaultsObjectClass	MAY		The occurence of the day in a month a cron job is to be executed. Valid values are: `1` - `4`. For example: `3` would be the third occurence. If you use a value higher than 4, the calculation will fail in months, which only have 4 same days (for example February will never have 5 Mondays ...).
sstCronDayOfWeek	sstMaintenanceDefaultsObjectClass	MAY		Day of week (`0` - `6`), where Sunday is `0`. For example: `1`, which means Monday.
sstCronMinute	sstMaintenanceDefaultsObjectClass	MAY		The number of minutes past the hour that the maintenance window must start. Valid values are: `0` - `59`. For example: `30`, which means 30 minutes past the hour. If the attribute `sstCronMinuteEnd` is set, then `sstCronMinute` is interpreted as the start of a maintenance window minute range.
sstCronMinuteEnd	sstMaintenanceDefaultsObjectClass	MAY		The number of minutes past the hour that the maintenance window must end (minus the duration defined with attribute `sstCronDuration>/code>). Valid values are: <code>0` - `59`. For example: `45`, which means 45 minutes past the hour. If this attribute is set, it is interpreted as the end of a maintenance window minute range, while `sstCronMinute` is interpreted as the start of a maintenance window minute range.
sstCronHour	sstMaintenanceDefaultsObjectClass	MAY		The hour the maintenance window must start. Valid values are: `0` - `23`. For example: `9`, which means 9 am, while `17` means 5 pm. If the attribute `sstCronHourEnd` is set, then `sstCronMinute` is interpreted as the start of a maintenance window hour range.
sstCronHourEnd	sstMaintenanceDefaultsObjectClass	MAY		The hour the maintenance window must end (minus the duration defined with attribute `sstCronDuration>/code>). Valid values are: <code>0` - `23`. For example: `9`, which means 9 am, while `17` means 5 pm. If this attribute is set, it is interpreted as the end of a maintenance window hour range, while `sstCronHour` is interpreted as the start of a maintenance window hour range.
sstCronDuration	sstMaintenanceDefaultsObjectClass	MAY		The duration of the maintenance window in minutes. Valid values are: `15` - `1440` (15 minutes to 24 hours). For example: `60`, which means 60 minutes (one hour).
sstNotificationWarning	sstNotificationObjectClass	MAY		This multi-valued attribute will be used to turn single notifications on or off. Currently, the only allowed value is `reminder`. The value (name) corresponds with the template dn.
sstInformPersonUID	sstRelationship	MAY		Stores the UID of the person to be informed if necessary. This UID can be used to look up the persons mail address, preferred language, name, surname or other information. As this attribute is multi-valued, the lookups will continue, even if this attribute is set.
sstResponsiblePersonUID	sstRelationship	MAY		Stores the UID of the person who is responsible for the system or service. This UID can be used to look up the persons mail address, preferred language, name, surname or other information.
sstResponsibleDeputyPersonUID	sstRelationship	MAY		Stores the UID of the deputy of the person who is responsible for the system or service. This UID can be used to look up the persons mail address, preferred language, name, surname or other information.
sstBelongsToResellerUID	sstRelationship	MAY	x	Stores the reseller UID the leaf belongs to. A unique integer value with 7 digits or more. In the case of OpenStack Domains (resellers), the value of `sstBelongsToResellerUID` corresponds with the value of `uid`. For example: `sstBelongsToResellerUID: 4000000` corresponds with `uid: 4000000`.
sstBelongsToCustomerUID	sstRelationship	MAY	x	Stores the customer UID the leaf belongs to. A unique value with 7 digits or more, must correspond with the uid entry. Each reseller is also a customer in the LDAP directory. Therefore, the value of the attribute `sstBelongsToCustomerUID` should always be set to the customer UID, that reflects the reseller for the OpenStack Domains. For example: `sstBelongsToCustomerUID: 4000001`.

Legend:

x: Mandatory in all cases.

Maintenance - Configuration - Customers - Notification settings

The sub tree stores the notification information for the maintenance service for the customer Customer Ltd. with the uid 4000001. This information is used as a fallback. The lookup is as follows:

Unit: uid=4000003,ou=units,ou=maintenance,ou=services,dc=stoney-cloud,dc=org.
Customer: ou=notifications,uid=4000001,ou=customers,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org.
Reseller: ou=notifications,uid=4000000,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org.
Default Reseller: ou=notifications,uid=4000000,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org.

The idea is, that even if somebody forgot to define something, no maintenance window will be lost or forgotten.

dn: ou=notifications,uid=4000001,ou=customers,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
objectclass: sstNotificationObjectClass
ou: notifications
description: The sub tree stores the notification information for the maintenance service for the customer Customer Ltd. with the uid 4000001.
sstInformPersonUID: 4000002
sstResponsiblePersonUID: 4000002
sstResponsibleDeputyPersonUID: 4000002
sstNotificationWarning: reminder

The following table describes the different attributes:

Attribute	Existence	Mandatory	Self-Service	Changeable	Description
ou	MUST	x			The name of this leaf.
description	MAY	x			The description of the leaf.
sstInformPersonUID	MAY	x			Stores the persons UID the notification will be sent to. For example: `4000002`. This means the information of the person is stored under the dn: `uid=4000002,ou=people,dc=stoney-cloud,dc=org`.
sstResponsiblePersonUID	MAY	x			Stores the persons UID, who is responsible for the maintenance. The notification will be sent to this person. For example: `4000002`. This means the information of the person is stored under the dn: `uid=4000002,ou=people,dc=stoney-cloud,dc=org`.
sstResponsibleDeputyPersonUID	MAY	x			Stores the UID of the deputy of the person who is responsible for the maintenance. The notification will be sent to this person. For example: `4000002`. This means the information of the person is stored under the dn: `uid=4000002,ou=people,dc=stoney-cloud,dc=org`.
sstNotificationWarning	MAY	x			This multi-valued attribute will be used to turn single notifications on or off. Currently, the only allowed value is `reminder`. The value (name) corresponds with the template dn. For example: `ou=reminder,ou=templates,uid=4000001,ou=customers,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org`.

Legend:

x: Mandatory in all cases.

Maintenance - Configuration - Customers - Templates

This sub tree contains the notification templates for the maintenance service for the customer Customer Ltd. with the uid 4000001:

dn: ou=templates,uid=4000001,ou=customers,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
ou: templates
description: This sub tree contains the templates for the maintenance service for the customer Customer Ltd. with the uid 4000001.

Maintenance - Configuration - OpenStack projects

The sub tree for the OpenStack projects specific maintenance service settings:

dn: ou=projects,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
ou: projects
description: The sub tree for the OpenStack projects specific maintenance service settings.

The sub tree for the specific maintenance service settings for the OpenStack project Customer Ltd. - Public Systems with the uid 4100001.

dn: uid=4100001,ou=projects,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: sstOpenStackProject
objectclass: sstRelationship
uid: 4100001
sstOpenStackId: 9ecb5bfdd4564f6ca52bba1e869eeea4
sstOpenStackName: Customer Ltd. - Public Systems
description: The sub tree for the specific maintenance service settings for the OpenStack project 'Customer Ltd. - Public Systems' with the uid 4100001.
sstIsActive: TRUE
sstBelongsToDomainID: b01822477be64c09950022486300c59c
sstBelongsToResellerUID: 4000000
sstBelongsToCustomerUID: 4000001

The following table describes the different attributes: The following table describes the different attributes:

Attribute	Objectclass	Existence	Mandatory	Description
uid	sstOpenStackProject	MUST	x	A unique integer value with 7 digits or more. In the case of OpenStack Domains (resellers), the value of `uid` corresponds with the value of `sstBelongsToResellerUID`. For example: `uid: 4000000` corresponds with `sstBelongsToResellerUID: 4000000`.
sstOpenStackId	sstOpenStackProject	MAY	x	The OpenStack project id as returned from the OpenStack API. For example: `"id" : "5a3a4fd5d6e94a87815131be42d8e6d9"`. This gives us the LDAP entry: `sstOpenStackId: 5a3a4fd5d6e94a87815131be42d8e6d9`.
sstOpenStackName	sstOpenStackProject	MAY	x	The OpenStack project name as returned from the OpenStack API. For example: `"name" : "Customer Ltd. - Public Systems"`. This gives us the LDAP entry: `sstOpenStackName: Customer Ltd. - Public Systems`.
description	sstOpenStackProject	MAY	x	The description of the leaf. For example: `The sub tree for the specific maintenance service settings for the OpenStack project 'Customer Ltd. - Public Systems' with the uid 4100001.`
sstIsActive	sstOpenStackProject	MUST	x	Is the entry active? Either `TRUE` (yes) or `FALSE` (no). The default value is `TRUE`.
sstBelongsToDomainID	sstOpenStackProject	MUST	x	The OpenStack domain id the project belongs to. For example: `sstBelongsToDomainID: b01822477be64c09950022486300c59c`.
sstBelongsToResellerUID	sstRelationship	MAY	x	Stores the reseller UID the leaf belongs to. A unique integer value with 7 digits or more. In the case of OpenStack Domains (resellers), the value of `sstBelongsToResellerUID` corresponds with the value of `uid`. For example: `sstBelongsToResellerUID: 4000000` corresponds with `uid: 4000000`.
sstBelongsToCustomerUID	sstRelationship	MAY	x	Stores the customer UID the leaf belongs to. A unique value with 7 digits or more, must correspond with the uid entry. Each reseller is also a customer in the LDAP directory. Therefore, the value of the attribute `sstBelongsToCustomerUID` should always be set to the customer UID, that reflects the reseller for the OpenStack Domains. For example: `sstBelongsToCustomerUID: 4000001`.

Legend:

x: Mandatory in all cases.

Maintenance - Configuration - OpenStack projects - Defaults

This sub tree stores the default settings for the stoney maintenance service for the OpenStack project 'Customer Ltd. - Internal Systems' with OpenStack id '5a3a4fd5d6e94a87815131be42d8e6d9' and with the OpenStack project uid '4000001'.

The configuration below tells us the following:

We have a maintenance window range (as sstCronMinuteEnd and sstCronHourEnd are set).
The maintenance window is executed every 2nd Tuesday of every month.
The maintenance windows can start a 09:30 and must end at 13:45 and takes 1 hour (60 minutes).
A reminder will be sent to 'Support stepping stone AG <support@stepping-stone.ch>'.

The lookup of the default settings for the stoney maintenance service is as follows:

Service roles: ou=defaults,ou=stoney_office,ou=roles,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org.
OpenStack project: ou=defaults,uid=4100000,ou=projects,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org.
Customer: ou=defaults,uid=4000001,ou=projects,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org.
Reseller: ou=defaults,uid=4000000,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org.

dn: ou=defaults,uid=4000001,ou=projects,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
objectclass: sstMaintenanceDefaultsObjectClass
objectclass: sstNotificationObjectClass
objectclass: sstRelationship
ou: defaults
description: This sub tree stores the default settings for the stoney maintenance service for the OpenStack project 'Customer Ltd. - Internal Systems' with OpenStack id '5a3a4fd5d6e94a87815131be42d8e6d9' and with the OpenStack project uid '4000001'.
sstIsActive: TRUE                       # MAY: The default is always TRUE, otherwise why bother? 
sstServicePriority: 3                   # MAY: We always set this, in case sstServiceAutomated is set to FALSE (as a fall-back position)
sstServiceAutomated: TRUE               # MAY: Depending on the reseller, we either have TRUE or FALSE. If sstServiceAutomated is not set, we presume FALSE
sstCronRepeatType: monthly              # MAY: repeat type is monthly
sstCronInterval: 1                      # MAY: repeat every month
sstCronOccurrenceInMonth: 2             # MAY: second occurence
sstCronDayOfWeek: 2                     # MAY: Tuesday
sstCronMinute: 30                       # MAY: 30 Minutes past the hour
sstCronMinuteEnd: 45                    # MAY: 45 Minutes past the hour (new attribute, for if we have a range: 09:30 - 13:45)
sstCronHour: 9                          # MAY: 9 am
sstCronHourEnd: 13                      # MAY: 1 pm (new attribute, for if we have a range: 09:30 - 13:45)  
sstCronDuration: 60                     # MAY: 60 minutes (one hour)
sstNotificationWarning: reminder        # MAY: We alway set this (Multi-valued attribute).
sstInformPersonUID: 1000482             # MAY: Support stepping stone AG (support@stepping-stone.ch)
sstResponsiblePersonUID: 1000482        # MAY: Support stepping stone AG (support@stepping-stone.ch)
sstResponsibleDeputyPersonUID: 1000482  # MAY: Support stepping stone AG (support@stepping-stone.ch)
sstBelongsToResellerUID: 4000000
sstBelongsToCustomerUID: 4000001

The following table describes the different attributes:

Attribute	Objectclass	Existence	Mandatory	Description
description	sstMaintenanceDefaultsObjectClass	MAY	x	The description of the leaf.
sstIsActive	sstMaintenanceDefaultsObjectClass	MAY	x	Is the entry active? Either `TRUE` (yes) or `FALSE` (no).
sstServicePriority	sstMaintenanceDefaultsObjectClass	MAY	x	The maintenance service level. The possible maintenance service levels (1, 2 or 3): `3`: Maintenance P3 [per Unit]: The Security Advisories will be installed once a month at the desired moment during the working hours (Monday to Friday from 09:00 - 12:00 and 13:00 - 17:00). `2`: Maintenance P2 [per Unit]: The Security Advisories will be installed once a month at the desired moment during the extended working hours (Monday to Friday from 07:00 - 12:00 and 13:00 - 19:00). `1`: Maintenance P1 [per Unit]: The Security Advisories will be installed once a month at the desired moment around the clock (Monday to Sunday from 00:00 - 24:00). For more information on these maintenance service levels, visit stepping stone GmbH web page. If the attribute `sstServiceAutomated` is set to `TRUE`, the `sstServicePriority` will be ignored. And we will have automated maintenance windows in the form of: Maintenance Automated (vcs_gitlab) [per Unit]: The Security Advisories will be installed once a month at the desired moment around the clock (Monday to Sunday from 00:00 - 24:00).
sstServiceAutomated	sstMaintenanceDefaultsObjectClass	MAY		A maintenance window is either executed automatically: `sstServiceAutomated: TRUE` or manually: `sstServiceAutomated: FALSE` If the attribute `sstServiceAutomated` does not exist, presume `FALSE`.
sstCronRepeatType	sstMaintenanceDefaultsObjectClass	MAY		How often is a cron job to be repeated. Valid values are: `daily`, `weekly`, `monthly`, `yearly`.
sstCronInterval	sstMaintenanceDefaultsObjectClass	MAY		The interval of a cron job. This attribute is dependant on the attribute sstCronRepeatType. Valid values are: `1` - `12`. For example: `2` could be every two days, weeks, months or years (depending on the value of the attribute `sstCronRepeatType`.
sstCronOccurrenceInMonth	sstMaintenanceDefaultsObjectClass	MAY		The occurence of the day in a month a cron job is to be executed. Valid values are: `1` - `4`. For example: `3` would be the third occurence. If you use a value higher than 4, the calculation will fail in months, which only have 4 same days (for example February will never have 5 Mondays ...).
sstCronDayOfWeek	sstMaintenanceDefaultsObjectClass	MAY		Day of week (`0` - `6`), where Sunday is `0`. For example: `1`, which means Monday.
sstCronMinute	sstMaintenanceDefaultsObjectClass	MAY		The number of minutes past the hour that the maintenance window must start. Valid values are: `0` - `59`. For example: `30`, which means 30 minutes past the hour. If the attribute `sstCronMinuteEnd` is set, then `sstCronMinute` is interpreted as the start of a maintenance window minute range.
sstCronMinuteEnd	sstMaintenanceDefaultsObjectClass	MAY		The number of minutes past the hour that the maintenance window must end (minus the duration defined with attribute `sstCronDuration>/code>). Valid values are: <code>0` - `59`. For example: `45`, which means 45 minutes past the hour. If this attribute is set, it is interpreted as the end of a maintenance window minute range, while `sstCronMinute` is interpreted as the start of a maintenance window minute range.
sstCronHour	sstMaintenanceDefaultsObjectClass	MAY		The hour the maintenance window must start. Valid values are: `0` - `23`. For example: `9`, which means 9 am, while `17` means 5 pm. If the attribute `sstCronHourEnd` is set, then `sstCronMinute` is interpreted as the start of a maintenance window hour range.
sstCronHourEnd	sstMaintenanceDefaultsObjectClass	MAY		The hour the maintenance window must end. Valid values are: `0` - `23`. For example: `9`, which means 9 am, while `17` means 5 pm. If this attribute is set, it is interpreted as the end of a maintenance window hour range, while `sstCronHour` is interpreted as the start of a maintenance window hour range. Therefore, the latest maintenance window can start at <coode>sstCronHourEnd</code> minus the duration defined with attribute `sstCronDuration`.
sstCronDuration	sstMaintenanceDefaultsObjectClass	MAY		The duration of the maintenance window in minutes. Valid values are: `15` - `1440` (15 minutes to 24 hours). For example: `60`, which means 60 minutes (one hour).
sstNotificationWarning	sstNotificationObjectClass	MAY		This multi-valued attribute will be used to turn single notifications on or off. Currently, the only allowed value is `reminder`. The value (name) corresponds with the template dn.
sstInformPersonUID	sstRelationship	MAY		Stores the UID of the person to be informed if necessary. This UID can be used to look up the persons mail address, preferred language, name, surname or other information. As this attribute is multi-valued, the lookups will continue, even if this attribute is set.
sstResponsiblePersonUID	sstRelationship	MAY		Stores the UID of the person who is responsible for the system or service. This UID can be used to look up the persons mail address, preferred language, name, surname or other information.
sstResponsibleDeputyPersonUID	sstRelationship	MAY		Stores the UID of the deputy of the person who is responsible for the system or service. This UID can be used to look up the persons mail address, preferred language, name, surname or other information.
sstBelongsToResellerUID	sstRelationship	MAY	x	Stores the reseller UID the leaf belongs to. A unique integer value with 7 digits or more. In the case of OpenStack Domains (resellers), the value of `sstBelongsToResellerUID` corresponds with the value of `uid`. For example: `sstBelongsToResellerUID: 4000000` corresponds with `uid: 4000000`.
sstBelongsToCustomerUID	sstRelationship	MAY	x	Stores the customer UID the leaf belongs to. A unique value with 7 digits or more, must correspond with the uid entry. Each reseller is also a customer in the LDAP directory. Therefore, the value of the attribute `sstBelongsToCustomerUID` should always be set to the customer UID, that reflects the reseller for the OpenStack Domains. For example: `sstBelongsToCustomerUID: 4000001`.

Legend:

x: Mandatory in all cases.

Maintenance - Configuration - Service (Puppet) roles

The sub tree for the service (Puppet) roles specific maintenance service settings:

dn: ou=roles,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
ou: roles
description: The sub tree for the service (Puppet) roles specific maintenance service settings.

The sub tree of the specific maintenance service settings for the stoney office service (Puppet) role called 'stoney_office' (Puppet roles don't contain spaces).

dn: ou=stoney_office,ou=roles,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
objectclass: sstServiceConfigurationObjectClass
ou: stoney_office
description: The sub tree of the specific maintenance service settings for the stoney office service (Puppet) role called 'stoney_office'.
sstIsActive: TRUE
sstIsDefault: TRUE

The following table describes the different attributes:

Attribute	Objectclass	Existence	Mandatory	Description
ou	organizationalUnit	MUST	x	The name of the service (Puppet) role. For example: `ou: stoney_office` (Puppet roles don't contain spaces).
description	organizationalUnit	MAY	x	The description of the leaf. For example: `The sub tree of the specific maintenance service settings for the stoney office service (Puppet) role called 'stoney_office'.`
sstIsActive	sstServiceConfigurationObjectClass	MUST	x	Is the entry active? Either `TRUE` (yes) or `FALSE` (no). The default value is `TRUE`.
sstIsDefault	sstServiceConfigurationObjectClass	MAY		Contains the leaf a default entry? Either `TRUE` (yes) or `FALSE` (no). If `sstIsDefault` is set to `TRUE`, the information of this subtree must alway be used (to make sure, that all automated maintenance windows are executed in the same time frame).

Legend:

x: Mandatory in all cases.

Maintenance - Configuration - service (Puppet) roles - Defaults

This sub tree stores the default settings for the stoney maintenance service settings for the stoney office service (Puppet) role called 'stoney_office'.

The configuration below tells us the following:

We have a maintenance window range (as sstCronMinuteEnd and sstCronHourEnd are set).
The maintenance window is executed every 2nd Wednesday of every month.
The maintenance windows can start a 03:00 and must end at 05:00 and takes half an hour (30 minutes).
A reminder will be sent to 'Support stepping stone AG <support@stepping-stone.ch>'.

The lookup of the default settings for the stoney maintenance service is as follows:

Service roles: ou=defaults,ou=stoney_office,ou=roles,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org.
OpenStack project: ou=defaults,uid=4100000,ou=roles,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org.
Customer: ou=defaults,uid=4000001,ou=roles,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org.
Reseller: ou=defaults,uid=4000000,ou=reseller,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org.

dn: ou=defaults,ou=stoney_office,ou=roles,ou=configuration,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
objectclass: sstMaintenanceDefaultsObjectClass
objectclass: sstNotificationObjectClass
objectclass: sstRelationship
ou: defaults
description: This sub tree stores the default settings for the stoney maintenance service settings for the stoney office service (Puppet) role called 'stoney_office'. Please be aware, that this is the production definition. The integration (test) definition is the same, except that the sstCronOccurrenceInMonth attribute is 1 instead of 2 (a week before).
sstIsActive: TRUE                       # MAY: The default is always TRUE, otherwise why bother? 
sstServicePriority: 3                   # MAY: We always set this, in case sstServiceAutomated is set to FALSE (as a fall-back position)
sstServiceAutomated: TRUE               # MAY: Depending on the reseller, we either have TRUE or FALSE. If sstServiceAutomated is not set, we presume FALSE
sstCronRepeatType: monthly              # MAY: repeat type is monthly
sstCronInterval: 1                      # MAY: repeat every month
sstCronOccurrenceInMonth: 2             # MAY: second occurence
sstCronDayOfWeek: 3                     # MAY: Wednesday
sstCronMinute: 0                        # MAY: 0 Minutes past the hour
sstCronMinuteEnd: 0                     # MAY: 0 Minutes past the hour (new attribute, for if we have a range: 03:00 - 05:00)
sstCronHour: 3                          # MAY: 3 am
sstCronHourEnd: 5                       # MAY: 5 am (new attribute, for if we have a range: 03:00 - 05:00)  
sstCronDuration: 30                     # MAY: 30 minutes (half an hour)
sstNotificationWarning: reminder        # MAY: We alway set this (Multi-valued attribute).
sstInformPersonUID: 1000482             # MAY: Support stepping stone AG (support@stepping-stone.ch)
sstResponsiblePersonUID: 1000482        # MAY: Support stepping stone AG (support@stepping-stone.ch)
sstResponsibleDeputyPersonUID: 1000482  # MAY: Support stepping stone AG (support@stepping-stone.ch)

The following table describes the different attributes:

Attribute	Objectclass	Existence	Mandatory	Description
description	sstMaintenanceDefaultsObjectClass	MAY	x	The description of the leaf.
sstIsActive	sstMaintenanceDefaultsObjectClass	MAY	x	Is the entry active? Either `TRUE` (yes) or `FALSE` (no).
sstServicePriority	sstMaintenanceDefaultsObjectClass	MAY	x	The maintenance service level. The possible maintenance service levels (1, 2 or 3): `3`: Maintenance P3 [per Unit]: The Security Advisories will be installed once a month at the desired moment during the working hours (Monday to Friday from 09:00 - 12:00 and 13:00 - 17:00). `2`: Maintenance P2 [per Unit]: The Security Advisories will be installed once a month at the desired moment during the extended working hours (Monday to Friday from 07:00 - 12:00 and 13:00 - 19:00). `1`: Maintenance P1 [per Unit]: The Security Advisories will be installed once a month at the desired moment around the clock (Monday to Sunday from 00:00 - 24:00). For more information on these maintenance service levels, visit stepping stone GmbH web page. If the attribute `sstServiceAutomated` is set to `TRUE`, the `sstServicePriority` will be ignored. And we will have automated maintenance windows in the form of: Maintenance Automated (vcs_gitlab) [per Unit]: The Security Advisories will be installed once a month at the desired moment around the clock (Monday to Sunday from 00:00 - 24:00).
sstServiceAutomated	sstMaintenanceDefaultsObjectClass	MAY		A maintenance window is either executed automatically: `sstServiceAutomated: TRUE` or manually: `sstServiceAutomated: FALSE` If the attribute `sstServiceAutomated` does not exist, presume `FALSE`.
sstCronRepeatType	sstMaintenanceDefaultsObjectClass	MAY		How often is a cron job to be repeated. Valid values are: `daily`, `weekly`, `monthly`, `yearly`.
sstCronInterval	sstMaintenanceDefaultsObjectClass	MAY		The interval of a cron job. This attribute is dependant on the attribute sstCronRepeatType. Valid values are: `1` - `12`. For example: `2` could be every two days, weeks, months or years (depending on the value of the attribute `sstCronRepeatType`.
sstCronOccurrenceInMonth	sstMaintenanceDefaultsObjectClass	MAY		The occurence of the day in a month a cron job is to be executed. Valid values are: `1` - `4`. For example: `3` would be the third occurence. If you use a value higher than 4, the calculation will fail in months, which only have 4 same days (for example February will never have 5 Mondays ...).
sstCronDayOfWeek	sstMaintenanceDefaultsObjectClass	MAY		Day of week (`0` - `6`), where Sunday is `0`. For example: `1`, which means Monday.
sstCronMinute	sstMaintenanceDefaultsObjectClass	MAY		The number of minutes past the hour that the maintenance window must start. Valid values are: `0` - `59`. For example: `30`, which means 30 minutes past the hour. If the attribute `sstCronMinuteEnd` is set, then `sstCronMinute` is interpreted as the start of a maintenance window minute range.
sstCronMinuteEnd	sstMaintenanceDefaultsObjectClass	MAY		The number of minutes past the hour that the maintenance window must end (minus the duration defined with attribute `sstCronDuration>/code>). Valid values are: <code>0` - `59`. For example: `45`, which means 45 minutes past the hour. If this attribute is set, it is interpreted as the end of a maintenance window minute range, while `sstCronMinute` is interpreted as the start of a maintenance window minute range.
sstCronHour	sstMaintenanceDefaultsObjectClass	MAY		The hour the maintenance window must start. Valid values are: `0` - `23`. For example: `9`, which means 9 am, while `17` means 5 pm. If the attribute `sstCronHourEnd` is set, then `sstCronMinute` is interpreted as the start of a maintenance window hour range.
sstCronHourEnd	sstMaintenanceDefaultsObjectClass	MAY		The hour the maintenance window must end (minus the duration defined with attribute `sstCronDuration>/code>). Valid values are: <code>0` - `23`. For example: `9`, which means 9 am, while `17` means 5 pm. If this attribute is set, it is interpreted as the end of a maintenance window hour range, while `sstCronHour` is interpreted as the start of a maintenance window hour range.
sstCronDuration	sstMaintenanceDefaultsObjectClass	MAY		The duration of the maintenance window in minutes. Valid values are: `15` - `1440` (15 minutes to 24 hours). For example: `60`, which means 60 minutes (one hour).
sstNotificationWarning	sstNotificationObjectClass	MAY		This multi-valued attribute will be used to turn single notifications on or off. Currently, the only allowed value is `reminder`. The value (name) corresponds with the template dn.
sstInformPersonUID	sstRelationship	MAY		Stores the UID of the person to be informed if necessary. This UID can be used to look up the persons mail address, preferred language, name, surname or other information. As this attribute is multi-valued, the lookups will continue, even if this attribute is set.
sstResponsiblePersonUID	sstRelationship	MAY	x	Stores the UID of the person who is responsible for the system or service. This UID can be used to look up the persons mail address, preferred language, name, surname or other information.
sstResponsibleDeputyPersonUID	sstRelationship	MAY	x	Stores the UID of the deputy of the person who is responsible for the system or service. This UID can be used to look up the persons mail address, preferred language, name, surname or other information.
sstBelongsToResellerUID	sstRelationship	MAY		Stores the reseller UID the leaf belongs to. A unique integer value with 7 digits or more. In the case of OpenStack Domains (resellers), the value of `sstBelongsToResellerUID` corresponds with the value of `uid`. For example: `sstBelongsToResellerUID: 4000000` corresponds with `uid: 4000000`. For the service (Puppet) roles this attribute must not be set, as the content of this value must be taken from either the OpenStack project, the customer or the reseller.
sstBelongsToCustomerUID	sstRelationship	MAY	x	Stores the customer UID the leaf belongs to. A unique value with 7 digits or more, must correspond with the uid entry. Each reseller is also a customer in the LDAP directory. Therefore, the value of the attribute `sstBelongsToCustomerUID` should always be set to the customer UID, that reflects the reseller for the OpenStack Domains. For example: `sstBelongsToCustomerUID: 4000001`. For the service (Puppet) roles this attribute must not be set, as the content of this value must be taken from either the OpenStack project, the customer or the reseller.

Legend:

x: Mandatory in all cases.

Maintenance - Units

The sub tree for the units of the maintenance service:

dn: ou=units,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: organizationalUnit
ou: units
description: The sub tree for the units of the maintenance service.

Maintenance - Units example

Each maintenance unit has its own leaf. A monthly maintenance window is the norm.

Maintenance window every month on the second Tuesday of the month between 09:30 and 10:30, starting on Tuesday, the 14th of April 2015.

The sstBelongsToServiceUID lookup is as follows:

OpenStack unit (server): ou=units,ou=openstack,ou=services,dc=stoney-cloud,dc=org.
Virtual Machine: ou=virtual machines,ou=virtualization,ou=services,dc=stoney-cloud,dc=org.
vServer: ou=vservers,ou=services,dc=stoney-cloud,dc=org.
Dedicated Server: ou=dedicated servers,ou=services,dc=stoney-cloud,dc=org (not implemented yet).
External Server: ou=external servers,ou=services,dc=stoney-cloud,dc=org (not implemented yet).

The idea is, that we presume, that most of the maintenance units belong to OpenStack units (servers) running on our OpenStack based stoney cloud installation.

In the example below, the service UID sstBelongsToServiceUID: 1234567 points to virtual machine with the b543f88f-dffe-426f-86d3-c7ff85c16d2a and the uid: 1234567.

dn: uid=4000003,ou=units,ou=maintenance,ou=services,dc=stoney-cloud,dc=org
objectclass: top
objectclass: sstMaintenanceObjectClass
objectclass: sstRelationship
uid: 4000003
description: The maintenance leaf for the virtual machine with the uid 1234567.
sstIsActive: TRUE
sstBillable: TRUE
sstServicePriority: 3
sstServiceAutomated: TRUE
sstCronRepeatType: monthly     # repeat type is monthly
sstCronInterval: 1             # repeat every month
sstCronStartDate: 20150414     # starting on Tuesday, the 14th of April 2015
sstCronOccurrenceInMonth: 2    # second occurence
sstCronDayOfWeek: 2            # Tuesday
sstCronMinute: 30              # 30 Minutes past the hour
sstCronHour: 9                 # 9 am
sstCronDuration: 60            # 60 minutes (one hour)
sstInformPersonUID: 4000002
sstResponsiblePersonUID: 4000002
sstResponsibleDeputyPersonUID: 4000002
sstNotificationWarning: reminder
sstIsMultiTenant: FALSE
sstBelongsToServiceUID: 1234567
sstBelongsToResellerUID: 4000000
sstBelongsToCustomerUID: 4000001

Other possible maintenance windows range from daily maintenance windows to bi yearly maintenance windows. The following examples just show the relevant attributes.

Maintenance window every day between 09:30 and 10:30, starting on Monday, the 5th of January 2015.

sstCronRepeatType: daily       # repeat type is daily
sstCronInterval: 1             # repeated every day
sstCronStartDate: 20150105     # starting on the fifth of January 2015
sstCronMinute: 30              # 30 Minutes past the hour
sstCronHour: 9                 # 9 am
sstCronDuration: 60            # 60 minutes (one hour)

Maintenance window every second day between 09:30 and 10:30, starting on Monday, the 5th of January 2015.

sstCronRepeatType: daily       # repeat type is daily
sstCronInterval: 2             # repeat every second day
sstCronStartDate: 20150105     # starting on the fifth of January 2015
sstCronMinute: 30              # 30 Minutes past the hour
sstCronHour: 9                 # 9 am
sstCronDuration: 60            # 60 minutes (one hour)

Maintenance window every two weeks on Monday between 09:30 and 10:30, starting on Monday, the 13th of April 2015.

sstCronRepeatType: weekly      # repeat type is weekly
sstCronInterval: 2             # repeat every second week
sstCronStartDate: 20150413     # starting on Monday, the 13th of April 2015
sstCronDayOfWeek: 1            # on Monday
sstCronMinute: 30              # 30 Minutes past the hour
sstCronHour: 9                 # 9 am
sstCronDuration: 60            # 60 minutes (one hour)

Maintenance window every six months on the 15. of the month between 09:30 and 10:30, starting on Wednesday, the 15th of April 2015.

sstCronRepeatType: monthly     # repeat type is monthly
sstCronInterval: 6             # repeat every six months
sstCronStartDate: 20150415     # starting on Wednesday, the 15th of April 2015
sstCronDayOfMonth: 15          # on the 15th day of the month
sstCronMinute: 30              # 30 Minutes past the hour
sstCronHour: 9                 # 9 am
sstCronDuration: 60            # 60 minutes (one hour)

Maintenance window every six months on the third Monday of the month between 09:30 and 10:30, starting on Monday, the 20th of April 2015.

sstCronRepeatType: monthly     # repeat type is monthly
sstCronInterval: 6             # repeat every six months
sstCronStartDate: 20150420     # starting on Monday, the 20th of April 2015
sstCronOccurrenceInMonth: 3    # third occurence
sstCronDayOfWeek: 1            # Monday
sstCronMinute: 30              # 30 Minutes past the hour
sstCronHour: 9                 # 9 am
sstCronDuration: 60            # 60 minutes (one hour)

Maintenance window every year on the 15th of March between 09:30 and 10:30, starting on Wednesday, the 11th of March 2015.

sstCronRepeatType: yearly      # repeat type is yearly
sstCronInterval: 1             # repeat every year
sstCronStartDate: 20150311     # starting on Wednesday, the 11th of March 2015
sstCronDayOfMonth: 11          # on the 11th day of the month
sstCronMinute: 30              # 30 Minutes past the hour
sstCronHour: 9                 # 9 am
sstCronDuration: 60            # 60 minutes (one hour)

Maintenance window every year on the third Monday of March between 09:30 and 10:30, starting on Monday, the 16th of March 2015.

sstCronRepeatType: yearly      # repeat type is yearly
sstCronInterval: 1             # repeat every year
sstCronStartDate: 20150316     # starting on Monday, the 16th of March 2015
sstCronMonthOfyear: 3          # third month of the year
sstCronOccurrenceInMonth: 3    # third occurence
sstCronDayOfWeek: 1            # Monday
sstCronMinute: 30              # 30 Minutes past the hour
sstCronHour: 9                 # 9 am
sstCronDuration: 60            # 60 minutes (one hour)

Maintenance window every two years on the third Monday of March between 09:30 and 10:30, starting on Monday, the 16th of March 2015.

sstCronRepeatType: yearly      # repeat type is yearly
sstCronInterval: 2             # repeat every two years
sstCronStartDate: 20150316     # starting on Monday, the 16th of March 2015
sstCronMonthOfyear: 3          # third month of the year
sstCronOccurrenceInMonth: 3    # third occurence
sstCronDayOfMonth: 1           # Monday
sstCronMinute: 30              # 30 Minutes past the hour
sstCronHour: 9                 # 9 am
sstCronDuration: 60            # 60 minutes (one hour)

The following table describes the different attributes:

Attribute	Objectclass	Existence	Mandatory	Description
uid	sstMaintenanceObjectClass	MUST	x	A unique integer value with 7 digits or more. For example: `4000003`.
description	sstMaintenanceObjectClass	MAY	x	The description of the leaf.
sstIsActive	sstMaintenanceObjectClass	MUST	x	Is the entry active? Either `TRUE` (yes) or `FALSE` (no).
sstBillable	sstRelationship	MAY	x	It the entry billable? Either `TRUE` (yes) or `FALSE` (no). All hierarchical levels must have `sstBillable: TRUE` to actually have an invoice generated and sent. If the attribute `sstBillable` doesn't exist, the default is `TRUE`. This way, we are forced to set a reseller, customer or product manually to `sstBillable: FALSE` if we want to avoid sending them an invoice.
sstCancellationDate	sstRelationship	MAY		The cancellation date of a reseller, customer or service in the form of [YYYY][MM][DD] (ISO 8601). For example: 20201231. The attribute `sstCancellationDate` is used in a logical AND combination with `sstIsActive`. With other words: Once the cancellation date has passed, it overrides the `sstIsActive` value.
sstServicePriority	sstMaintenanceObjectClass	MAY	x	The maintenance service level. The possible maintenance service levels (1, 2 or 3): `3`: Maintenance P3 [per Unit]: The Security Advisories will be installed once a month at the desired moment during the working hours (Monday to Friday from 09:00 - 12:00 and 13:00 - 17:00). `2`: Maintenance P2 [per Unit]: The Security Advisories will be installed once a month at the desired moment during the extended working hours (Monday to Friday from 07:00 - 12:00 and 13:00 - 19:00). `1`: Maintenance P1 [per Unit]: The Security Advisories will be installed once a month at the desired moment around the clock (Monday to Sunday from 00:00 - 24:00). For more information on these maintenance service levels, visit stepping stone GmbH web page. If the attribute `sstServiceAutomated` is set to `TRUE`, the `sstServicePriority` will be ignored. And we will have automated maintenance windows in the form of: Maintenance Automated (vcs_gitlab) [per Unit]: The Security Advisories will be installed once a month at the desired moment around the clock (Monday to Sunday from 00:00 - 24:00).
sstServiceAutomated	sstMaintenanceObjectClass	MAY		A maintenance window is either executed automatically: `sstServiceAutomated: TRUE` or manually: `sstServiceAutomated: FALSE` If the attribute `sstServiceAutomated` does not exist, presume `FALSE`.
sstCronRepeatType	sstMaintenanceObjectClass	MAY	x	How often is a cron job to be repeated. Valid values are: `daily`, `weekly`, `monthly`, `yearly`.
sstCronInterval	sstMaintenanceObjectClass	MAY	x	The interval of a cron job. This attribute is dependant on the attribute sstCronRepeatType. Valid values are: `1` - `12`. For example: `2` could be every two days, weeks, months or years (depending on the value of the attribute `sstCronRepeatType`.
sstCronStartDate	sstMaintenanceObjectClass	MAY	x	The first time a cron job is executed. This date is stored in the form of [YYYY][MM][DD] (ISO 8601). For example: `2010314` (the 14th of March 2015).
sstCronDuration	sstMaintenanceObjectClass	MAY	x	The duration of the maintenance window in minutes. Valid values are: `15` - `1440` (15 minutes to 24 hours). For example: `60`, which means 60 minutes (one hour).
sstCronMinute	sstMaintenanceObjectClass	MAY		The number of minutes past the hour that the maintenance window must start. Valid values are: `0` - `59`. For example: `30`, which means 30 minutes past the hour. If the attribute `sstCronMinuteEnd` is set, then `sstCronMinute` is interpreted as the start of a maintenance window minute range.
sstCronMinuteEnd	sstMaintenanceObjectClass	MAY		The number of minutes past the hour that the maintenance window must end (minus the duration defined with attribute `sstCronDuration>/code>). Valid values are: <code>0` - `59`. For example: `45`, which means 45 minutes past the hour. If this attribute is set, it is interpreted as the end of a maintenance window minute range, while `sstCronMinute` is interpreted as the start of a maintenance window minute range.
sstCronHour	sstMaintenanceObjectClass	MAY		The hour the maintenance window must start. Valid values are: `0` - `23`. For example: `9`, which means 9 am, while `17` means 5 pm. If the attribute `sstCronHourEnd` is set, then `sstCronMinute` is interpreted as the start of a maintenance window hour range.
sstCronHourEnd	sstMaintenanceObjectClass	MAY		The hour the maintenance window must end (minus the duration defined with attribute `sstCronDuration>/code>). Valid values are: <code>0` - `23`. For example: `9`, which means 9 am, while `17` means 5 pm. If this attribute is set, it is interpreted as the end of a maintenance window hour range, while `sstCronHour` is interpreted as the start of a maintenance window hour range.
sstCronDayOfWeek	sstMaintenanceObjectClass	MAY		Day of week (`0` - `6`), where Sunday is `0`. For example: `1`, which means Monday.
sstCronDayOfMonth	sstMaintenanceObjectClass	MAY		The day of the month a cron job is to be executed. Valid values are: `1` - `31`. For example: `3` is the third of the month.
sstCronMonthOfyear	sstMaintenanceObjectClass	MAY		The month of the year a cron job is to be executed. Valid values are: `1` - `12`. For example: `3` would be March.
sstCronOccurrenceInMonth	sstMaintenanceObjectClass	MAY		The occurence of the day in a month a cron job is to be executed. Valid values are: `1` - `4`. For example: `3` would be the third occurence. If you use a value higher than 4, the calculation will fail in months, which only have 4 same days (for example February will never have 5 Mondays ...).
sstInformPersonUID	sstRelationship	MAY	x	Stores the UID of the person to be informed if necessary. This UID can be used to look up the persons mail address, preferred language, name, surname or other information.
sstResponsiblePersonUID	sstRelationship	MAY	x	Stores the UID of the person who is responsible for the system or service. This UID can be used to look up the persons mail address, preferred language, name, surname or other information.
sstResponsibleDeputyPersonUID	sstRelationship	MAY		Stores the UID of the deputy of the person who is responsible for the system or service. This UID can be used to look up the persons mail address, preferred language, name, surname or other information.
sstNotificationWarning	sstMaintenanceObjectClass	MUST	x	This multi-valued attribute will be used to turn single notifications on or off. Currently, the only allowed value is `reminder`. The value (name) corresponds with the template dn.
sstIsMultiTenant	sstMaintenanceObjectClass	MAY		If this singe-valued attribute is set to TRUE, we know that this is a multi tenant capable system or service. For example stoney backup, stoney storage or stoney wiki). The maintenance notification system will therefore know, that it must inform the tenants differently.
sstBelongsToServiceUID	sstMaintenanceObjectClass	MAY	x	Stores the UID of the service the leaf belongs to. This UID can be used to look up other information. A unique value with 7 digits or more. `4000123`.
sstBelongsToResellerUID	sstRelationship	MUST	x	Stores the reseller UID the leaf belongs to. A unique value with 7 digits or more. For example: `4000000`.
sstBelongsToCustomerUID	sstRelationship	MUST	x	Stores the customer UID the leaf belongs to. A unique value with 7 digits or more. For example: `4000001`.

Legend:

x: Mandatory in all cases.

Last modified 3 years ago

stoney maintenance: OpenLDAP directory data organisation

Abstract

Data Organisation

Maintenance

Maintenance - Configuration

Maintenance - Configuration - Reseller

Maintenance - Configuration - Reseller - Defaults

Maintenance - Configuration - Reseller - Notification settings

Maintenance - Configuration - Reseller - Templates

Maintenance - Configuration - Reseller - Reminder mail templates

Maintenance - Configuration - Reseller - Reminder mail templates: placeholders (txt/html)

Maintenance - Configuration - Reseller - Reminder mail templates: reminder_mail.de-CH.txt

Maintenance - Configuration - Reseller - Reminder mail templates: reminder_mail.en-GB.txt

Maintenance - Configuration - Reseller - Reminder mail templates: reminder_mail_reseller.de-CH.txt

Maintenance - Configuration - Reseller - Reminder mail templates: reminder_mail_reseller.en-GB.txt

Maintenance - Configuration - Customers

Maintenance - Configuration - Customers - Defaults

Maintenance - Configuration - Customers - Notification settings

Maintenance - Configuration - Customers - Templates

Maintenance - Configuration - OpenStack projects

Maintenance - Configuration - OpenStack projects - Defaults

Maintenance - Configuration - Service (Puppet) roles

Maintenance - Configuration - service (Puppet) roles - Defaults

Maintenance - Units

Maintenance - Units example

stoney cloud