Difference between revisions of "Libvirt external snapshot with GlusterFS"
From stoney cloud
| [unchecked revision] | [unchecked revision] |
(→VSS & Qemu-GA) |
(→Command overview) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 219: | Line 219: | ||
# when finished, have Qemu finish it (TODO: check whether we would have to install a dirty block tracer at some point): | # when finished, have Qemu finish it (TODO: check whether we would have to install a dirty block tracer at some point): | ||
| + | # EDIT PKL: No we don't need to trace the dirty blocks as qemu already does something similar. After the block commit, | ||
| + | # both disks are in a way synchronized. I.e. if a write operation is performed, it is written to the snapshot image as | ||
| + | # well as to base image. After the block-job-complete command the write operations are written to the base image only | ||
virsh qemu-monitor-command 8196bb77-7478-4bfb-a6ea-52b3a2c65eba --pretty '{"execute": "block-job-complete", "arguments": { "device": "drive-virtio-disk0"} }' | virsh qemu-monitor-command 8196bb77-7478-4bfb-a6ea-52b3a2c65eba --pretty '{"execute": "block-job-complete", "arguments": { "device": "drive-virtio-disk0"} }' | ||
Latest revision as of 16:07, 14 May 2014
With recent versions of Libvirt and Qemu it is possible to create external disk snapshots while the current and future volumes are connected natively to the GlusterFS cluster via gfapi (not via FUSE).
For this test, the following versions have been used:
- GlusterFS: 3.4.2
- Qemu: 2.0.0
- Libvirt: 1.2.3
Contents
Part 1: Preparation
- VM-Name
- d4572522-eae4-4e3e-ab36-618ae4a91fb4
- Original GlusterFS Image Path
- virtualization/vm-templates/5b77d2f6-061f-410c-8ee7-9e61da6f1927/de7c7c4e-8664-4ac7-b559-53fd52ec461c.qcow2
snap.xml:
<domainsnapshot> <name>snap</name> <disks> <disk name='vda' type='network'> <driver type='qcow2'/> <source protocol='gluster' name='virtualization/vm-templates/5b77d2f6-061f-410c-8ee7-9e61da6f1927/de7c7c4e-8664-4ac7-b559-53fd52ec461c.snap01.qcow2'> <host name='10.1.120.11'/> </source> </disk> </disks> </domainsnapshot>
Part 2: Create the snapshot using virsh
Note: passing --quiesce in addition to the options already specified makes libvirt contact the qemu-guest-agent it expects to run within the VM and calling freeze/thaw as appropriate to get a more-than-crash-consistent image (on Windows using VSS).
virsh snapshot-create d4572522-eae4-4e3e-ab36-618ae4a91fb4 snap.xml --disk-only --atomic
Examples:
~ # virsh snapshot-create d4572522-eae4-4e3e-ab36-618ae4a91fb4 snap.xml --disk-only --atomic Domain snapshot snap created from 'snap.xml'
~ # virsh snapshot-create 8196bb77-7478-4bfb-a6ea-52b3a2c65eba kvm-0022-snapshot-01.xml --disk-only --atomic --quiesce
Part 3: Check
Libvirt
vm-test-02 ~ # virsh snapshot-list d4572522-eae4-4e3e-ab36-618ae4a91fb4 Name Creation Time State ------------------------------------------------------------ snap 2014-05-02 15:16:09 +0200 disk-snapshot vm-test-02 ~ # virsh snapshot-info d4572522-eae4-4e3e-ab36-618ae4a91fb4 --current Name: snap Domain: d4572522-eae4-4e3e-ab36-618ae4a91fb4 Current: yes State: disk-snapshot Location: external Parent: - Children: 0 Descendants: 0 Metadata: yes
VM Image Path
vm-test-02 ~ # virsh dumpxml d4572522-eae4-4e3e-ab36-618ae4a91fb4 | grep "\.qcow2"
<source protocol='gluster' name='virtualization/vm-templates/5b77d2f6-061f-410c-8ee7-9e61da6f1927/de7c7c4e-8664-4ac7-b559-53fd52ec461c.snap01.qcow2'>
Backing File Path
Unfortunately, the domblkinfo command still does not understand natively attached glusterfs volumes, but qemu-img does:
vm-test-02 ~ # qemu-img info gluster://10.1.120.11/virtualization/vm-templates/5b77d2f6-061f-410c-8ee7-9e61da6f1927/de7c7c4e-8664-4ac7-b559-53fd52ec461c.snap01.qcow2
image: gluster://10.1.120.11/virtualization/vm-templates/5b77d2f6-061f-410c-8ee7-9e61da6f1927/de7c7c4e-8664-4ac7-b559-53fd52ec461c.snap01.qcow2
file format: qcow2
virtual size: 200G (214748364800 bytes)
disk size: 2.6M
cluster_size: 65536
backing file: gluster://10.1.120.11/virtualization/vm-templates/5b77d2f6-061f-410c-8ee7-9e61da6f1927/de7c7c4e-8664-4ac7-b559-53fd52ec461c.qcow2
backing file format: qcow2
Format specific information:
compat: 1.1
lazy refcounts: false
Cleanup/Commit (Offline)
Unfortunately libvirt does not know how to remove an external snapshot and still has some issues when trying to blockcommit on a file with native-gluster backing file:
vm-test-02 ~ # virsh blockcommit d4572522-eae4-4e3e-ab36-618ae4a91fb4 vda
error: invalid argument: top 'virtualization/vm-templates/5b77d2f6-061f-410c-8ee7-9e61da6f1927/de7c7c4e-8664-4ac7-b559-53fd52ec461c.snap01.qcow2' in chain for 'vda' has no backing file
vm-test-02 ~ # qemu-img info /var/virtualization/vm-templates/5b77d2f6-061f-410c-8ee7-9e61da6f1927/de7c7c4e-8664-4ac7-b559-53fd52ec461c.snap01.qcow2
image: /var/virtualization/vm-templates/5b77d2f6-061f-410c-8ee7-9e61da6f1927/de7c7c4e-8664-4ac7-b559-53fd52ec461c.snap01.qcow2
file format: qcow2
virtual size: 200G (214748364800 bytes)
disk size: 45G
cluster_size: 65536
backing file: gluster://10.1.120.11/virtualization/vm-templates/5b77d2f6-061f-410c-8ee7-9e61da6f1927/de7c7c4e-8664-4ac7-b559-53fd52ec461c.qcow2
backing file format: qcow2
Format specific information:
compat: 1.1
lazy refcounts: false
We therefore have to do it via Qemu, below is the example for doing it offline, but the same should be possible via qemu-monitor commands (since qemu-2.0 can block-commit from the top-level image):
virsh shutdown d4572522-eae4-4e3e-ab36-618ae4a91fb4 qemu-img commit gluster://10.1.120.11/virtualization/vm-templates/5b77d2f6-061f-410c-8ee7-9e61da6f1927/de7c7c4e-8664-4ac7-b559-53fd52ec461c.snap01.qcow2 # edit the XML to point to the original image again virsh edit d4572522-eae4-4e3e-ab36-618ae4a91fb4 # remove the snapshot rm /var/virtualization/vm-templates/5b77d2f6-061f-410c-8ee7-9e61da6f1927/de7c7c4e-8664-4ac7-b559-53fd52ec461c.snap01.qcow2 # unregister the snapshot in libvirt virsh snapshot-delete d4572522-eae4-4e3e-ab36-618ae4a91fb4 --current --metadata
Cleanup/Commit (Online)
Patches for traversing the block chain with direct gluster as backing file are already on the libvirt mailinglist, the same goes for patches fixing the glusterfs storage pool. They will probably become part of libvirt-1.2.5. Until then, one has to bypass libvirt to execute a block commit.
~ # virsh qemu-monitor-command e43a2954-3914-465f-9391-9e63b52ec2f5 --pretty '{"execute":"block-commit", "arguments": { "device":"drive-virtio-disk0", "base": "gluster://10.1.120.11/virtualization/vm-templates/5b77d2f6-061f-410c-8ee7-9e61da6f1927/bbf7796f-90bf-45ab-8645-2894f5dae727.qcow2", "top": "gluster://10.1.120.11/virtualization/vm-templates/5b77d2f6-061f-410c-8ee7-9e61da6f1927/bbf7796f-90bf-45ab-8645-2894f5dae727.snap01.qcow2" } }'
{
"return": {
},
"id": "libvirt-28"
}
Unfortunately libvirt does not handle block-jobs well which it didn't start. They hang forever while Qemu waits for block-job-complete:
~ # virsh blockjob e43a2954-3914-465f-9391-9e63b52ec2f5 vda
Block Commit: [100 %]
~ # virsh qemu-monitor-command e43a2954-3914-465f-9391-9e63b52ec2f5 --pretty '{"execute": "query-block-jobs"}'
{
"return": [
{
"io-status": "ok",
"device": "drive-virtio-disk0",
"busy": false,
"len": 214748364800,
"offset": 214748364800,
"paused": false,
"speed": 0,
"type": "commit"
}
],
"id": "libvirt-88"
}
So, one has to issue the block-job-complete manually again:
~ # virsh qemu-monitor-command e43a2954-3914-465f-9391-9e63b52ec2f5 --pretty '{"execute": "block-job-complete", "arguments": { "device": "drive-virtio-disk0"} }'
{
"return": {
},
"id": "libvirt-93"
}
~ # virsh blockjob e43a2954-3914-465f-9391-9e63b52ec2f5 vda
~ #
Now check the images again:
~ # virsh qemu-monitor-command --hmp e43a2954-3914-465f-9391-9e63b52ec2f5 "info block"
drive-ide0-0-1: /var/virtualization/iso/a473e8ec-3327-4e24-a19b-e1e7a5a791e0.iso (raw, read-only)
Removable device: locked, tray closed
drive-virtio-disk0: gluster://10.1.120.11/virtualization/vm-templates/5b77d2f6-061f-410c-8ee7-9e61da6f1927/bbf7796f-90bf-45ab-8645-2894f5dae727.qcow2 (qcow2)
Qemu has now only the original image open again.
Have libvirt forget about the snapshot:
virsh snapshot-delete e43a2954-3914-465f-9391-9e63b52ec2f5 --current --metadata # update the XML to have it point to the original file again virsh edit e43a2954-3914-465f-9391-9e63b52ec2f5 # remove the snapshot file: rm /var/virtualization/vm-templates/5b77d2f6-061f-410c-8ee7-9e61da6f1927/bbf7796f-90bf-45ab-8645-2894f5dae727.snap01.qcow2
Command overview
# create a snapshot for all disks virsh snapshot-create 8196bb77-7478-4bfb-a6ea-52b3a2c65eba kvm-0022-snapshot-01.xml --disk-only --atomic --quiesce # TODO: copy images away at this point # initiate the block commit for the first disk # TODO: do this for all disks virsh qemu-monitor-command 8196bb77-7478-4bfb-a6ea-52b3a2c65eba --pretty '{"execute":"block-commit", "arguments": { "device":"drive-virtio-disk0", "base": "gluster://10.122.0.11/virtualization/vm-persistent/0f83f084-8080-413e-b558-b678e504836e/711b08f2-7c26-4ac3-bb46-66176523d752.qcow2", "top": "gluster://10.122.0.11/virtualization/vm-persistent/0f83f084-8080-413e-b558-b678e504836e/711b08f2-7c26-4ac3-bb46-66176523d752.snapshot-01.qcow2" } }' # monitor the progress virsh blockjob 8196bb77-7478-4bfb-a6ea-52b3a2c65eba vda virsh qemu-monitor-command 8196bb77-7478-4bfb-a6ea-52b3a2c65eba --pretty '{"execute": "query-block-jobs"}' # when finished, have Qemu finish it (TODO: check whether we would have to install a dirty block tracer at some point): # EDIT PKL: No we don't need to trace the dirty blocks as qemu already does something similar. After the block commit, # both disks are in a way synchronized. I.e. if a write operation is performed, it is written to the snapshot image as # well as to base image. After the block-job-complete command the write operations are written to the base image only virsh qemu-monitor-command 8196bb77-7478-4bfb-a6ea-52b3a2c65eba --pretty '{"execute": "block-job-complete", "arguments": { "device": "drive-virtio-disk0"} }' # remove the snapshot information in libvirt. As an alternative, one could tell libvirt when creating the snapshot to not record any information about it (--no-metadata) virsh snapshot-delete 8196bb77-7478-4bfb-a6ea-52b3a2c65eba --current --metadata # remove the snapshot rm /var/virtualization/vm-persistent/0f83f084-8080-413e-b558-b678e504836e/711b08f2-7c26-4ac3-bb46-66176523d752.snapshot-01.qcow2 # have libvirt forget about it as well virsh edit 8196bb77-7478-4bfb-a6ea-52b3a2c65eba
VSS & Qemu-GA
TODO: at the moment, the following error appears in the Windows Application Log:
Volume Shadow Copy Service error: Unexpected error querying for the iVssWriterCallback interface, hr = 0x8007005, Access is denied.
This error can be solved by executing the following steps:
- From the Start Menu, select Run
- In the Open field, input dcomcnfg and click OK.
- OR Open the PowerShell and type dcomcnfg.exe and hit enter
- Expand Component Services, Computers, and My Computer.
- Right-click My Computer and click Properties on the pop-up menu.
- Click the COM Security tab.
- Under Access Permission click Edit Default.
- From the Access Permissions dialog, add the "Network Service" account with Local Access allowed.
- Close all open dialogs.
- Restart the computer.
